So helpful, saved me almost 200 dollars, I appreciate your channel immensely. Every time I have a part of this car that needs to be replaced, you've got me covered.
Of all the jobs I watched you do, this has to be the one I dread the most. I don't mind a million nuts and bolts but i've no patience for plastic clips and the like!
I got a 2010 Toyota Corolla, it’s got 160,000 miles on it, and a dear hit this part of the car and I could take the front off, had no idea how to get the panel off , it’s great to learn something new ! Thanks for sharing, Jim from Houston Texas, USA
Thanks my friend from Houston Texas USA (I am from Lesvos, Greece) and I hope this video helps you more easily to remove the damaged part of your car so that you can repair it yourself. I wish you good repair success and look forward to hearing from you.
Watch everyone of your videos, wish good fortune, usa 🇺🇸2010 Toyota Corolla le made in Canada, USA, 198788 , had a tree fall on it , been hit in front two time, well care for , tough car , lots of hyw miles , hopefully I can get at least 300,000 ! Thanks again
Superb video production. I have to replace a fender that a shop took off, but won't be replacing. I'm looking forward to doing now that I've watched this excellent video. I thank you very much for helping me.
I got side-swiped back in January. My friend who I'm buying my 2010 Toyota Corolla from is trying to avoid the mechanic. This is definitely going to help us replace the damaged fender and put a new one on. Might need get a few more clips.
Thank you my friend for your kind words. As for the clips, I know that some of them break, so you should have some new clips with you so that you can do your job more easily and quickly. Below are some links that one can find at low prices: www.ebay.com/itm/10x-For-Toyota-Inside-Trim-Board-Front-Door-Panel-Glass-Moulding-Retainer-Clip/264850254182?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648 www.ebay.com/itm/50Pcs-Engine-Cover-Grille-Bumper-Retainer-Clips-For-Lexus-Toyota-90467-07211-Hot/263800713198?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 www.ebay.com/itm/5Sets-Car-Front-Fender-Bumper-Cover-Clip-Kit-Replace-For-Toyota-Camry-Corolla/254788374305?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 www.ebay.com/itm/292-Set-For-TOYOTA-Fender-Door-Hood-Bumper-Trim-Clips-Body-Retainer-Assortment/223621819841?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 www.ebay.com/itm/10x-Front-Fender-Clip-Retainer-Fit-for-Toyota-90467-10183-Corolla-Pontiac-Lexus/323762670499?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
@@YiannisPagonis you're always on point my friend... Also i like to keep some spare clips for the one clip who holds the fender liner to the fender itself and then you screw a screw inside it... It's the first clip you removed
@@K_N_44 As it is known, apart from these clips, there are clips in other parts of the car whenever it would be good to be equipped with others, especially if you do frequent work on your car.
thank you for this..that plastics draft protector came off tonight with a bunch of holes, but i got to see here it was just 1 clip. this helped in the whole chore
@@YiannisPagonis accident this winter I haven't fixed yet, the plastic splash Shield is gone I started loosening bolts that day that wind thing came out
Dear Yiannis. You are doing a great job. This is amazing. You can disassembly car without a garage using the simplest tools. Your Toyota is great. Build 2008 year (I suppose) and there's no rust yet. Well, there are no winters in Greece :)
My dear JaRabbit, first of all, thank you for your kind words. It is really quite difficult for me that I do not have my own space (garage) to do all this work so I am forced to do it in the countryside. And you know that it limits me to do things whenever I want. I can only do them (especially now in winter) on weekends or when I have time off work. Here in Greece so far the weather is still good and it is not cold enough. What is your country my friend?
8:43 how do I fix the gap between fender and the door right above the mirror? I got my car fixed from the body shop and they are making an excuse that because it’s aftermarket part. Can that gap above the mirror be fixed? And how ? I can send you a picture if I have your email?
Yes I believe you can adjust the clearance between the fender and the door. First loosen (but do not remove) all the bolts holding the fender and then adjust the clearance properly by moving the fender (Up- down, right-left). Tighten the bolts after the adjustment. Please watch the second part to understand better czcams.com/video/0YBq1a5o5ls/video.html pagonis33@gmail.com send me a picture
I do have corolla S 2010 in india with only 8,0078 km driven on it. I want to change my car's headlights is it possible to change them without removing bumper??
So helpful, saved me almost 200 dollars, I appreciate your channel immensely. Every time I have a part of this car that needs to be replaced, you've got me covered.
Thanks my friend for your support and I try to do my best for you.
@@YiannisPagonis για την αφαίρεση του αριστερού φτερού σε ποια σημεία ενδεχομένως διαφέρει η αφαιρεση-τοποθετηση;
@@geov490 Δεν υπάρχει κάποια διαφορά μεταξύ αριστερού και δεξιού φτερού. Είναι σε όλα τα ίδια.
Of all the jobs I watched you do, this has to be the one I dread the most. I don't mind a million nuts and bolts but i've no patience for plastic clips and the like!
Fear not! Be patient and work methodically. Pre-work before you start and have everything you need to achieve your goal!
I got a 2010 Toyota Corolla, it’s got 160,000 miles on it, and a dear hit this part of the car and I could take the front off, had no idea how to get the panel off , it’s great to learn something new ! Thanks for sharing, Jim from Houston Texas, USA
Thanks my friend from Houston Texas USA (I am from Lesvos, Greece) and I hope this video helps you more easily to remove the damaged part of your car so that you can repair it yourself. I wish you good repair success and look forward to hearing from you.
Watch everyone of your videos, wish good fortune, usa 🇺🇸2010 Toyota Corolla le made in Canada, USA, 198788 , had a tree fall on it , been hit in front two time, well care for , tough car , lots of hyw miles , hopefully I can get at least 300,000 ! Thanks again
Thank you. I couldn’t find a single video for months thanks for uploading
You are welcome dude. On my channel you can find many videos about the maintenance and repair of the 2007-2013 Toyota Corolla.
Superb video production. I have to replace a fender that a shop took off, but won't be replacing. I'm looking forward to doing now that I've watched this excellent video. I thank you very much for helping me.
Thank you very much my friend and I wish you every success in this endeavour 😉😉
I got side-swiped back in January. My friend who I'm buying my 2010 Toyota Corolla from is trying to avoid the mechanic. This is definitely going to help us replace the damaged fender and put a new one on. Might need get a few more clips.
I wish you every success in this endeavour
@@YiannisPagonis ευχαριστώ
@@RealGateGuardian Παρακαλώ στα ελληνικά
Great video !
Good background music - no headache 👍
Thank you my friend ❤❤
Thank you...such a great job as always...
Keep in mind that you can find replacement clips for every each one of those clips for cheap
Thank you my friend for your kind words. As for the clips, I know that some of them break, so you should have some new clips with you so that you can do your job more easily and quickly. Below are some links that one can find at low prices:
www.ebay.com/itm/10x-For-Toyota-Inside-Trim-Board-Front-Door-Panel-Glass-Moulding-Retainer-Clip/264850254182?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
www.ebay.com/itm/50Pcs-Engine-Cover-Grille-Bumper-Retainer-Clips-For-Lexus-Toyota-90467-07211-Hot/263800713198?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
www.ebay.com/itm/5Sets-Car-Front-Fender-Bumper-Cover-Clip-Kit-Replace-For-Toyota-Camry-Corolla/254788374305?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
www.ebay.com/itm/292-Set-For-TOYOTA-Fender-Door-Hood-Bumper-Trim-Clips-Body-Retainer-Assortment/223621819841?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
www.ebay.com/itm/10x-Front-Fender-Clip-Retainer-Fit-for-Toyota-90467-10183-Corolla-Pontiac-Lexus/323762670499?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
@@YiannisPagonis you're always on point my friend...
Also i like to keep some spare clips for the one clip who holds the fender liner to the fender itself and then you screw a screw inside it...
It's the first clip you removed
@@K_N_44 As it is known, apart from these clips, there are clips in other parts of the car whenever it would be good to be equipped with others, especially if you do frequent work on your car.
thank you for this..that plastics draft protector came off tonight with a bunch of holes, but i got to see here it was just 1 clip. this helped in the whole chore
Why does this happen? What was the reason?
@@YiannisPagonis accident this winter I haven't fixed yet, the plastic splash Shield is gone I started loosening bolts that day that wind thing came out
@@whateveritwasitis Oh I'm so sorry about that! Are you now well after the accident? Did anyone get hurt?
@@YiannisPagonis no, got nice check and bought fender myself and sprayed myself 😃
Dear Yiannis. You are doing a great job. This is amazing. You can disassembly car without a garage using the simplest tools. Your Toyota is great. Build 2008 year (I suppose) and there's no rust yet. Well, there are no winters in Greece :)
My dear JaRabbit, first of all, thank you for your kind words. It is really quite difficult for me that I do not have my own space (garage) to do all this work so I am forced to do it in the countryside. And you know that it limits me to do things whenever I want. I can only do them (especially now in winter) on weekends or when I have time off work. Here in Greece so far the weather is still good and it is not cold enough. What is your country my friend?
@@YiannisPagonis Poland :)
@@jarabbit4561 Thanks 😉
Спасибо вам за труд очень познавательно ваши ролики я тоже владею такой Ласточкой 2012 года .привет из России г. Волгоград
Большое спасибо, мой друг из России. Также много приветствий из Греции.
Great video and the angle is helpful
Thank you my friend
非常感谢您的视频！
不用谢，我的朋友 ❤❤
nice job - it was helpful - I will need to do this on my prius - same concept
Do it my friend and I wish you every success
thanks a lot for the video
You are welcome my friend ❤❤
I think it was easy to remove 😅
Thanks dear 🌹 🌹
It was not a toy, of course. This had its difficulties that you need to be aware of. Some things may seem easy but they are not.
Great stuff
Thank you 🙏 very much
great job
Thank you my friend 🙏
thanks❤️❤️
moving👌
You are welcome my friend
Thanks
You are welcome
8:43 how do I fix the gap between fender and the door right above the mirror? I got my car fixed from the body shop and they are making an excuse that because it’s aftermarket part. Can that gap above the mirror be fixed? And how ? I can send you a picture if I have your email?
Yes I believe you can adjust the clearance between the fender and the door. First loosen (but do not remove) all the bolts holding the fender and then adjust the clearance properly by moving the fender (Up- down, right-left). Tighten the bolts after the adjustment.
Please watch the second part to understand better
czcams.com/video/0YBq1a5o5ls/video.html
pagonis33@gmail.com send me a picture
@@YiannisPagonis emailed you
I do have corolla S 2010 in india with only 8,0078 km driven on it. I want to change my car's headlights is it possible to change them without removing bumper??
No my friend this is not possible. Watch my video below and you will understand why
czcams.com/video/og78U1aTLu4/video.html
@@YiannisPagonis thanks 😊
@@sajiwan1 You are welcome 🙏
Cómo se yama esa parte
guardabarros delantero
The music is god awful but thanks for showing the step by step.
You are welcome my friend. Some people like this music and some people don't. What should I do in this case?