BMW M2: Fixing The ISSUE On My M-Performance Exhaust For $5?!
Vložit
- čas přidán 3. 07. 2022
- In this video we try to fix the rattling noise of my M-Performance exhaust.
Aluminum foil tape: amzn.to/3P1kBAT
Instagram: / thehunterhofman
#exhaust #mperformance #m2 #n55 - Auta a dopravní prostředky
I was getting so scared that you actually removed the shouting😂
Another banger, I’ve sold my M2 but still watch your content because it’s good.
Much appreciated as always mate🙌🏻
Why did you sell it?
@@Stilo95 he got the g80
Thanks for providing a solution! I'll be trying it this weekend!
Anytime mate, good luck
Sad your voice had gone, glad you recovered quickly :). I have the same M tips (costly). Did not know it was that easy to remove (steal) them :0. Anyway you can change the cold start noise with a more neighbor friendly startup roar. Take care m8!
I know right? Crazy to think you can so easily steal stuff worth hundreds of euros! Thanks for the comment mate!
This channel is a must for all f87 owner
Thanks buddy!
Thanks! I’ll try this next!👍🏼
Alright Connor, hope this works for you! Considered subscribing? Having a hard time reaching that 1 million subscriber mark.
I'm glad I found this video since it turns out that my M2 had that exact same rattle issue with the tips. As soon as I took them off, there was zero rattle on cold start. I'm a little concerned with the tape though over extended use and heat cycles when highway driving. Have you needed to constantly reapply the aluminum tape?
And I'm glad this video found you buddy. It's been on my car for a couple of weeks and no issues whatsoever. I have not needed to reapply the tape, nor has any rattle come back. Having said that, the tape is heat resistant and the end of the exhaust doesn't get that hot at all. Give it a try, I would say, and I advise to rather use too much tape than too little.
Thanks voor de tip maat! Vandaag meteen getest en moet zeggen het is echt 10x beter, helaas niet helemaal weg(optisch vibreert het nog lichtelijk bij de coldstart) maar voor 5 euro zeker een vooruitgang!
Mooi om te horen makker. Eerste keer was het bij mij ook nog niet compleet weg. Toen ik er later nog meer tape omheen deed, wel. Beter te veel dan te weinig tape in dit geval! Optisch vibreert ie inderdaad ook nog steeds bij mij
I have this exact same issue good to know there's a simple fix. Do you also have bad drone at ~80mph in 6th gear?
No drone to be honest, no. Good luck getting it done mate
Going to give this a shot on mine!
Did the same to mine today, it’s not completely gone(I can still see slightly a vibration during the coldstart) but it’s definatelly 10 times better as it was before.
Good call, thanks for the tip, no pun.😀
You’re welcome buddy😎
Do you know what size Allen wrench you used?
I can’t remember anymore, but I believe it was size 3.
Almost 1000 subs
Getting close!
question
Where are you get those parts?
answer
The M-performance parts you mean? Depends on where you live, but every official BMW dealer sells these carbon parts
My rattle unfortunately is from a broken weld on the right side.
Another CZcams publisher created a video showing how he TIG welded a break in his MPE. Mine broke in the exact same spot.
I'm thinking about buying a Dinan steel exhaust. No shop in Raleigh, NC welds titanium with TIG.
Anyone know if the MPE carbon fiber tips will fit the Dinan resonator?
Am I correct that your M2 is a pre-facelift? The earlier version MPE’s had cracking-issues
That intro👌👌👌
Just code out the cold start, and have happy enngine and rod bearings not running with very hard ignition timing :D
It can only be turned off with the help of a tune, not with coding unfortunately! Would love to have cold start deleted one day though
Cold start uses an ignition map with less advanced timing ... that why the exhaust is louder, theoretically this is actually kinder to your rod bearings... :)
I have the same M tips. Any risk of getting issues with these tips because of the tape ?... Thanks for this vid by the way
You’re welcome mate. No issues at all, just wrenched on the car a couple of days ago just after driving and the tips don’t get hot enough to cause any issues. Don’t use duct tape though, I would say
@@TheHunterHofman Thank you. Can we use WD-40 to clean the M tips?
@@steph34 yeah that would work, as long as the tips are clean and dry afterwards. The friction of the tape between the tips and the exhaust stops the tips vibrating. Also, rather use too much aluminum tape than too little! Good luck
@@TheHunterHofman Thanks again... I'll do it
My exhaust does the Same Rattle but dosent matter with oder without Tips :/
Any help ?
Maybe you have an older exhaust, check for cracks in the exhaust (around the tips somewhere). Also check if everything is tightened securely. Hope that helps, you’re welcome
@@TheHunterHofman Thank you, i will Check but i think something is cracked inside the muffler.
@@TheHunterHofman thanks for your tip!
It was Cracked…. Outside on the Right side. When valve is closed Right before the valve….
Now its fixed:)
Thank you a lot.
Also the tape help removing the rattle of the tips
You know you can align the tips by eye then tighten down so they are even, right?
Yes, but they would then still vibrate. You have to knock ‘em on there all the way
@@TheHunterHofman so why not put the tape back more then?
HUNTER!! DONT CRASH YOU CAR!
It sounds so good but this Sound ruins it all :( i will try this thank you !
Good luck mate, hope it helps💪🏻
Lol such ez fix... Get your shit together BMW
Crazy to think that it was approved after quality control seeing that the length of the exhaust tubes differs
🏃 p̳r̳o̳m̳o̳s̳m̳