How to apply the Bambu Lab Liquid Glue
Vložit
- čas přidán 6. 09. 2024
- The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.
Link to product: us.store.bambu...
pro tip, you dont have to cover the whole plate if you only printing something on half. these plate stickers are quite durable. i scraped glue off and re applied after every print for a month or more and it only ripped today.
Do you reapply after every print? Reapply in just the areas you printed?
May as well go back to using hairspray and party like it’s 2015🎉😂
According to BL, "To ensure maximum effect, multiple glue applications are not recommended."
i apply glue, run 8 prints, wash the plate, reapply glue.
@@aerialphotons237… I read wash the plate on the side of the glue stick as well, but with what… Soap? Alcohol? Is there any official info on this?
Ahem… as I was preparing to reglue, I noticed “Use Detergent To Clean The Surface”.
Written right on the build plate. In my defense, I did see the “Glue Stick Can Help” message on the other corner. But failed to notice the former.
I would love to see a spray version of this!
Do that and the piece comes out stained. There is no way to remove the stains left by the glue.
How often?
Hey bambu youve changed 3d printing forever and i was wondering if you are working on a 300x300 3d printer
PLEASE NO… I have already spent too much! 😭 😆🤣
@@DavidTrejo
Requesting that on your site you include downloads for the project files that give the print times you publish. For instance, you have an image for a 16 min 30 second benchy but there is no link to the project file that shows exactly how you did it. I would like to study the project files before making a p1p purchase.
Looks a lot like rebranded magigoo 🤔🤔
Using glue stick in 2023, yeah..bambu lab is so innovating.
Right?!
I mean there is a textured plate that doesn’t need the glue…
haters gonna hate
- then he goes back to his 4 years old Mk3
@@duchnguyen2735 Which has been trouble free for 20k+ hours.
To all the haters in the comments:
1. You dont have to use glue stick, if you use the bambulab Textured plate
2. I never used glue stick and also never use the cool plate. Even for PLA, I use the textured plate without glue stick
Cheers
Unless you want lidar check - then you cannot do that.
unfortunally my prints start un-sticking after few layers...i've the textured plate for the P1P...any suggestion!? :(
Increase bed temps. I use:
PLA: 65
PETG: 80
ASA: 100
ASA is still a work-in-progress, since it's literally printing the first print as I'm typing this, but seems to hold up.
So far, I've ONLY used glue (this liquid glue from Bambu) for ASA, all other prints have been firmly adhered to the plate, so much so that I sometimes have issues getting them off, especially PETG-CF.
Hopefully you'll figure it out, if you havn't already.
@@FrankP83
LOL if only that were true ... If i do not apply glue, half the time some part comes loose at the extremes of the print.
@@FrankP83 Mit Spülmittel und warmen wasser reinigen.
That Cool plate is outdated design
You are missing the point entirely..... And this makes me sad. They showed old plate when releasing new video.
@@uzkandaI’m apologize, I misunderstood the tone of your comment. I didn’t know the cool plate had changed and I didn’t mean to make you sad so I deleted my comment. Is just the color different or was there a more substantial change like the material?
or make it a PEI steel sheet like prusa to never bother with stupid glue, having glue as official solutions feels like 2014 lmfao
I have the Bambulab PEI Steel and never use the glue. My prints are awesome, also PLA.
This printer is good until you have to talk to the technicians…. I’m having trouble with a defective part and I’m 3 weeks writing with them because the printer has a defective part that they don’t want to change it . Since day one this part was defective but the post service of bambú labs is a piece of ……..
You have replacments for all parts of the printer and can order them online. If somethign is really defect, I would suggest to repalce the part.
@@Finsterwald_ no , there is no replacement for the carbon rods, and one of them has like a dent / mark wich the say it’s dirt and treat me as if I’m stupid or something and I’ve tried to clean it a hundred times, the bambú labs post service it’s really really bad
@@mrvicco They're now available to purchase as a spare part on their website.
@@Phrozen2 yes I’ve just seen it thank you , seen the price now I know why they didn’t want to assume the cost of it in warranty ……. The printer had 3 days and now I will have you buy them as soon as they are again in stock
3 days and ill return it.@@mrvicco
Textured PEI 🤷🏻♂️
doesn't work well with the LIDAR on the X1 according to them
not working with lidar is a technology unresolved gap
Bambu lab you design a printer that is a real killer, and you force people to use a glue stick on a builtak, no but seriously, it's ender 3 level a glue stick for the bed. I am very very happy with this printer, but the buildtak I am disappointed, especially the price of your liquid glue !!!
I make my own adhesive it’s fucking crackef
What? You cannot reply without using such language that is not needed here.
What the hell is crackef? 😂
what's ur secret sauce?? for my FF creators i used school glue on textured plate, since i wanna keep them long lasting
It's just magigoo which sucks anyway but that my opinion
It is surprising and very disappointing that they tried to pack as much tech into the printer only to fall flat on their face when it comes to the build plates. Glue stick...really? The textured build plate eliminates all of these issues...but (and that's a big but) the textured plate does not work with any of the lidar functionality so what's the point. The high temp plate is your standard PEI smooth sheet, no issues other than maybe you want a textured bottom surface instead of a smooth one. The engineering plate is just glossy painted metal. The cool plate is a failure. And with all of the plates they recommend glue stick 🤣
Problem is lidar relies on the smooth surface to work. Textured surfaces wont work with lidar.
@@butcho399 - Yeah I see folks complaining and am like, have you even 3d printed at all? This is normal and such a non-issue. Loving my X1C …and the glue stick method 😉😏
@@DavidTrejo Seriously - it literally takes seconds and only needs to be applied every few prints. Besides, glue stick isn't just to make things stick better, but to also remove them easier. Every time I take a print of the build plate and wash the glue off - the bottom is as smooth as a baby's butt ....
@@K8Stuff
Yeah, I’ve been printing almost non stop and I haven’t had any issues.
That said, I did buy a textured plate because I’m lazy so we’ll see how that goes. 😏
The liquid glue is leaving Streak marks in the bottom of my prints that aren't coming off. Not a great method
Impossible to buy one, appears it is only printers for youtubers......also advertised as lower price hiding you have to pay almost 200 quid more for taxes.... qidi x max same price as p1p.....
what are you even talking about, thousands have received their printers.
Everything has its own price, tax not included. tax, who knows who is in what country need to pay how much tax ?