Master Sword "Replicas"
Vložit
- čas přidán 27. 10. 2023
- As a Zelda fan, I’ve wanted a replica of the iconic Master Sword for some time. Over the years, I did occasionally look up replicas, but never thoroughly searched to find a definitive one. However, that’s what I’ll be doing in this video: Looking at every affordable Master Sword replica I can find online and figuring out if any are worthy of being displayed in my bedroom.
Music used:
- Minish Village - The Legend of Zelda: The Minish Cap
- Termina Field - The Legend of Zelda: Majora’s Mask
- Skyloft - The Legend of Zelda: Skyward Sword
- Groose’s Theme - The Legend of Zelda: Skyward Sword
- Dragon Roost Island - The Legend of Zelda: The Wind Waker
- Ghirahim (Phase 1) - The Legend of Zelda: Skyward Sword
- Skyfield - The Legend of Zelda: Skyward Sword
- Miniboss - The Legend of Zelda: Ocarina of Time
- Pursuit ~ Cornered - Phoenix Wright: Ace Attorney
- Divine Trial (1 Terminal) - The Legend of Zelda: Breath of the Wild
- Divine Trial (3 Terminals) - The Legend of Zelda: Breath of the Wild
- Colony 9 - Xenoblade Chronicles: Definitive Edition (I couldn’t resist adding a Xenoblade track, lol)
- That one part of the 3rd Tears of the Kingdom trailer track
#zelda - Hry
Bro wasn't the chosen one, so he just took the sword with the stone attached 💀
no, he just attached it for more power, just like in TotK.
bruh pulled it like he Jack Horner in Puss in Boots 2 💀
Dude is a cardboard artist
AND HE STILL SPITTING BARS
@@placodermwisp8229 lol fr
take a shot every time he says hilt
Alcohol poisoning speed run
Yeah, I really wish I had brushed up on my sword anatomy before recording this, lol. Though, you’d still be comatose if you were to take a shot every time I said “guard” in that case. If it means anything, I just assumed “hilt” was another way of referring to the guard since you could call the handle a handle or grip, and sheath a sheath or scabbard. It seemed like every element of a sword had at least 1 other synonym from those two instances alone, so I just thought when people mentioned the hilt, they were referring to solely the guard.
I did realize the error by the end of my recording session (I didn’t feel like recording over every single time I improperly used "hilt", lol), so I do refer to the guard properly at 19:23. That’s one less shot you guys would have taken.
Rip
5:02 I have this replica and can confirm part of the guard broke off when it fell from my umbrella holder
I have one too, it broke as well!😢
I got 2 and it happened to both haha
Same thing happened to mine, the guard straight up broke in half down the middle.
Same though it was when my mother accidentally bumped into the wall while vacuuming (easy to fix
I've been in Master Sword replica hell for the past few months just like you and I'm so glad someone else shares my experience.
I am back a month later. I was thinking about this video lol. I managed to nab a preorder for the Proplica master sword... My god, the images of it are beautiful. Accurate scabbard, accurate handle, accurate everything, AND SOUNDS. God I'm so excited. Hopefully they release more though because I fought tooth and nail to be able to get an order in! Godspeed.
Finally someone pointed out the master sword "replica" scam
Sadly we non rich adults have no other choice!
I have the light blue one i of course knew it was fake but i really wanted a foam one!
bro really had to pull out incel rants for a video about plastic swords 💀
Calling 3D printed prop sellers "lazy" and how "the machine spits it out" shows how little you know about it. There is an entire community around 3d printing props, and as someone who does the hobby myself and has 3d printed a 100% accurate master sword from botw, the process is painstakingly tedious and labor-intensive. Not only do you have to have your printer settings tuned damn-near perfectly to get it to print right, the amount of sanding, priming, filling, and painting that takes place afterwards is insane, that is only if you have the dedication to make the prop look smooth and not printed, which is what I do. Think whatever you wanna think, but 3D printers do way more than just spit out models. They aren't magic machines.
lol
I agree completely with this. plus getting the models can be a headache
@@owenbyrne9850 Yes, ESPECIALLY if you model them yourself. That's a whole other beast.
Ok yah I agree and disagree at the same time on the premise that he wasn’t just looking for a 3d printed version he was looking for anything acrurate
3:27 bro pulled out the misogyny + sonic render combo over the silly metal stick 💀
would've been funnier if after he said that we saw that one clip of Ninja with a big butt imitating them
Exactly what I thought watching this.
seriously though it was so unnecessary
How disappointing
came out of nowhere lmao
that last sword having a dulled out tip might be due to the bladed weapon safety regulations of wherever they are?
1:24 these are geniunly awesome, and are a lot more impressive than if you did just print the templates
sorry i think it’s funny that at 18:00 “lazy 3d prints” are bad, but then at 18:04, the sword is good, even when, except for the blade, it’s visibly 3d printed💀
This dude… he had to throw in the women hate with the sonic😂 tell me you’re bitchless without telling me you’re bitchless
Huh
I'm sayin brahh
Oh, go dilate.
I pretty sure the guy was hating on how a huge portion of the pictures of humans wearing stuff on amazon and similar sites are just poorly photoshopped stock photos. "Fake" was being used in the same way one would call a tree octopus fake.
The full tang master sword is how the master sword would look and function as an irl blade made for actual combat. Yeah its not accurate to the games but it's accurate to real life function which I think is pretty neat
I think it look pretty close the the link to the past master sword
never once did you notice the taper of the blade's edge going toward the tip as a detail, which many of these were not accurate with.
also, the idea that the Master Sword should never change appearance or need upgrading is fantasy on your part. in the canon of the games, the power of the Master Sword can and does fade over time. it's a part of the plotline of Wind Waker that its power must be restored. in Ocarina of Time, it's able to send Link's consciousness seven years into the future, but by A Link to the Past, it's so weak that a random blacksmith can strengthen it with a standard tempering and you still need the Silver Arrows to help destroy Ganon. speaking of the upgrades in A Link to the Past, by the way: they don't literally look like the concept art you showed. it's concept art for a reason. the in-game sprite shows the same sword with updated color schemes, and in A Link Between Worlds - the direct sequel set in the same Hyrule which also makes available those upgrades - it's shown to be the Master Sword in its original form, just with a changed blade color.
you _still_ aren't the Zelda expert you think you are. add to that your casual misogynistic comments, and we have ourselves a real loser.
this fandom doesn't need your voice until you do some growing up.
Both you and the creator of this video need to chill
(Although, before you get me wrong, you _are_ right.)
I am a person that likes to imagine what it'd be like if the games were done better/in a different way (like mixing BotW and TotK's story, mechanics and looks to make the perfect modern Zelda game, or making a hypothetical TotK based HW: AoC mod), so I get what he says about Link from ALttP simply throwing the M-sword to something like a blacksmith or a pond to enhance it, however, the M-sword wasn't in its prime (actually, far from it), so it's comprehensible why the upgrades.
On the other hand, the names...
Yeah, maybe instead of tempered and golden sword, we could have gotten the tempered and golden Master Sword. Although, it was the sword's debut, so, as the video creator said in one of his comments, it's not that much of a problem. He could have been less picky about it, though.
Also, one minor mistake in your comment- ALBW isn't ALttP's sequel, it comes after the oracles and LA (not Los Angeles, Link's Awakening lol), with a different Link from the other four games. It _is_ on the same Hyrule, and it's also a spiritual succesor to ALttP, because of the story, Dark World, items, etc. (Hero of Legend/New Hero of Legend, although the 2nd name is lazy). For reference, the follow-up to ALBW is TH (Triforce Heroes, which is barely a Zelda game in terms of story, although I love the mechanics except for offline game).
yeah you’re right. i clicked on this video bc i’m a massive zelda fan and i thought this would just be a fun vid poking fun at poorly made master sword replicas. but this dude gives off major incel vibes, i couldn’t keep watching after the second sexist remark he made.
Finally someone who thinks this too, I really wanted to enjoy this video but by the second random misogynistic attempt at a joke I was put off. Pair that with the major "ermmm achshually the Master sword should be like this all the time because its my favourite and that means its the best" energy and you get an uncomfortable user clicking off and removing their like.
Oh fuck off, all you drooling, gaped, herpes-ridden *PUSSIES.* Calling out e-whoredom is absolutely based.
It's illegal to have videos so awesome with only 20k subs
Bandai is making one for their Proplica line, so good news!
From the pictures it does look exactly like the one in BotW but the proplica line uses PVC, so when it comes out I'd wait for a reviewer to get their hands on it before I buy it.
@@Mb_Drei That’s fair. I have a metal replica and those always feel nicer, but the bandai one might have cool effects
Yup, it actually looks incredible, so I’m waiting for that one to hopefully deliver
The struggle to find a good master sword replica is real…
Can you show me a link?
7:00 Well, here's the plot twist: the Master Sword's hilt it NOT purple.
The thing is, just like the Master Sword has only been blue in one game, there's only one game in the series in which the Master Sword has been purple too. And that's Twilight Princess.
So if it's not blue nor purple... Then what color is it? The answer is INDIGO.
Indigo is the color that sits right in between blue and purple. But depending on the lighting, it can look bluer than it actually is. Also, one of the most common forms of colorblindness is one that makes people struggle to see shades of red, so for them the Master Sword always looks blue.
If you want to be a mildly attractive girl with no talent you can just be a mildly attractive girl with no talent, no one is stopping you
that's not how that works
@@valiantviktor Yes it is
@@SibLight nah not really
@@valiantviktor do you think transgender women just spawn from the aether?
@@SibLight wait those are real things?
You don’t UNDERSTAND how much I needed this video in my life, I HATEEEE these “replicas” and it’s so ugly or not even the right color or shape or even design, I’m extremely picky about these replicas just like yourself but this video brings peace to my soul knowing there’s someone out there just like me when it comes to a video game sword being inaccurate
4:01 thats the master sword from A Link To The Past, that's why it looks so different
Was about to say the same thing right from the official artwork.
That brass sword has been around for some time. I remember seeing it years ago, and back then I too initially believed it was emulating the look of the Master Sword from A Link to the Past. I do show that sword later in the video (16:50), but I’m not seeing the resemblance you guys seem to be seeing. The shaping of the blades and guards aren’t the same, the guards’ colors don’t really match, the handle on the official art is red with a completely different texture, and the hilt gems are different shapes.
www.heroicreplicas.com/portfolio/link-to-the-past-master-sword
That’s a link to a replica of the ALttP Master Sword by Heroic Replicas. It resembles what's depicted in the official art significantly better. Also, a couple other commenters here have brought up how this brass sword was created by some guy who wanted to make a more practical Master Sword, and manufacturers just took his design and pumped out a bunch of replicas of it. Considering there are many listings for this sword on Amazon and other sites- all with minor variations in not only the sword itself, but the scabbard as well- I’m led to believe the narrative that it’s merely a reimagining that was simply stolen and mass produced (and not someone’s attempt at replicating the ALttP’s Master Sword).
Then again, I could be completely blind and not be seeing what you guys are.
@@niftydrifter Heroic Replicas also has a nigh 1:1 replica of the modern Master Sword, albeit extremely expensive. I got some custom work done from them a few years ago on an upgraded version of the cheap HF Murasama replica you'll see everywhere on the internet
@niftydrifter actually nevermind apparently you mentioned it in the video and I just wasn't listening actively
based on the cover art maybe
Master Sword from LTP and several other instances have had a blue color or aura to the blade. They handed you diamonds and you apparently didn't have enough hearts to shoot the beam!
Amazing job on the paper art though, Id have that stuff on display.
Bro knows nothing about 3d printing. It is not a press button make product process. There is tons of work that goes into 3d modeling software to make a quality model. Even with the most expensive machines there is so much fine tuning and settings optimizations required to get a decent result. Getting the perfect settings for your machine can take months or even years. And even then there is hours upon hours of post processing, filling, sanding, painting, assembling, and even sometimes mold making. To call 3d printing lazy is just stubborn ignorance and dismissive of an artform you clearly dont understand.
Sure, theres plenty of 3d printed garbage and crap looking products because the barrier of entry has gotten so affordable but most people dont put in the work to master this craft. But that is true with every artform.
You sir, chose the BEST and I mean the BEST loz song to play as the background music. The minish village theme is the most beautiful song on the franchise
Shoutout to Jawa's Junkyard and The Saber Trade for making the first ever purchasable Master Sword lightsaber; that thing is so cool.
Could be better, though; an auxiliary button, and internal railings for easier chassis insertion would be nice. The normal button is also pretty easy to lose, so I feel like spring-loaded buttons would work better.
My favorite parts are the incel shit and lack of understanding 3d printing props. Especially since the last one he complained about had clearly 3d printed parts.
No way this dude having a fit about a sword from a video game is calling 3D printing lazy.
this video is so ✨💫autistic core💫✨
It’s called having interests
Ever heard of interests?
This guy is so relatable and is so underrated
This is a very very good video. The research, editing, and overall talk wins my heart.
16:35 My guy, it was the third game in the damn series! They weren't thinking that far ahead!
Lol, yeah, and at 17:19 I basically say that by acknowledging ALttP was when the Master Sword debuted. Maybe if you had waited 44 seconds before commenting, you wouldn’t have had to point out something already addressed, my guy.
5:03, the guard does indeed break easily, i got this specific one as a gift in like 2014, i was carful with it, but it did end up breaking eventually, i still have it, the guard is pretty much all gone, and the blade wobbles, not the best quality in general
I love watching video about viddy game and then misogyny 3:28
XD
Whaaaa whaaa whaaaaaaaaaa
I have the costume prop at home and it’s not that bad if you just want a Master Sword replica for an affordable price. It’s just plastic, but it’s still better than many of the other swords shown in this video. In fact, I still have it on display to this day!
You know, I unironically wanted to do a video like this, talking about the same swords and stuff and you beat me to time. But hey, congrats! It's still a great video, and I really liked it!
Always a good day when nifty uploads 😁
I dont know if you have seen but Proplica are bringing out an official master sword and it looks amazing, perfect PURPLE colour. I do want to get one from heroic replicas though as they are probably the best out here, the hylian shield also looks amazing by them.
Terraria, Minecraft, Sonic, Zelda stuff in one video, amazing content pal!
He has my respect for the true nights Edge
1:17 sonic be rolling around, since you mentioned him aswell as having zelda content, imma sub now
I bought the one at 5:54 when I was like 11, I still have it over a decade later, but the tip is broken off and the wings on the guard have also gone throughout extensive use. It was a nice nostalgia hit to see what it originally looked like, haha.
I also got the dark variation of the "weird blue lip" version as a christmas gift not too long ago, it makes for decent enough office decor.
My first game was og ocarina of time, but any is a good first time experience, it made me a fan of the series
I have the wind waker master sword replica, it's not that bad, still a great sword. Could've been more accurate but what can ya do?
Honestly, yeah, replicas can be difficult to get right, and I feel the pain of trying to look for something that's also as accurate as possible.
Just instead of the Master Sword with me, it's actually the Four Sword.
Where did you get your Hylian Shield replica? It looks really really good
It would have been funny if after all that critique on swords, the one you already had at the end turned out to be the foam toy.
About your issue with upgrading it in A Link to the Past, it still is a Base 30 Damage weapon, upgrading it to a 120 Damage Sword like in A Link to the Past is actually pretty sick.
And the Regular Master Sword cannot even hurt Ganon in A Link to the Past without using spin attacks because Ganon has the Full Triforce in his Posession and the Holiness of the Master Sword isnt that powerful enough , it needs to become the Golden Sword
Yeah, a significant damage increase and Ganon being unfazed by anything weaker than the Golden Sword IS pretty awesome, but stuff like that is irrelevant to the point I was trying to make in that tangent. The issues I have with upgrading the Master Sword in ALttP is that it’s physically altered (the color schemes on the swords’ pixel art change) and the ways to upgrade it aren’t necessarily fitting. These two things make the sword seem like it wasn't so legendary after all.
If I remember correctly, the Master Sword becomes the Tempered Sword after giving it to some blacksmiths, then becomes the Golden Sword after tossing it into some pool of water somewhere.
Such methods of upgrading insinuate the weapon wasn’t initially created to be the strongest it could have been. You mean to tell me Link’s perilous journey to temper the Goddess Sword into the Master Sword in Skyward Sword wasn’t enough, and sometime later another incarnation of Link just had to throw it into some fancy water to make it way better? Hell, it's not even called the "Master Sword" after the upgrades, which further sullies the mythical weapon.
Sure, if the sword is initially weak because of some excuse like dissipating power between games, that’s fine because it means the sword was initially much more powerful. If it can be upgraded, it should be through means less superficial (if that makes any sense). That’s why I mentioned Breath of the Wild’s Trial of the Sword being an exception, as it was merely unlocking the original, true power of the sword, and the method of getting said power wasn't something lame-ish like giving the sword to little blacksmiths who pound it with some hammers centuries after the legendary sword was born.
If there were some Captain America game where you could collect pieces of metal to reinforce his iconic shield, that would diminish its strength and origin by implying this near-indestructible weapon wasn’t created to be the best it could have been, and could easily be made better by finding some random chunks of metal somewhere. There would have to be some appropriate lore like, “Oh, before Howard Stark [the creator of the shield] died, he left some notes detailing the locations of several previously-unknown pieces of vibranium he would have loved to add to the shield himself,” in such a case.
Perhaps I should have been as explicit in the video as I am here, but I thought my mentioning of the BotW exception was sufficient. Hopefully, no one gets super angry about it, but if they do, maybe they’ll run into this comment for the clarification.
This whole thing is super nitpicky, I know, but I guess as someone whose first Zelda game with the Master Sword wasn’t ALttP, I expect the weapon and its reputation to be consistent. Again, Nintendo likely didn’t realize the Master Sword was going to be such a staple back then, so it’s not really that big a deal.
@@niftydrifter
I caj completely understand that, but the idea that the sword can become evem stronger was also used in other Scenarios, we simply seem to forget that.
In Twilight Princess while the Sword is able to do an Exorcism on Link everytime he transforms into a Wolf when touching Zant's Shadow Crystals he made with Ganondorf's magic.
But only after powering up the Master Sword with the Light of the Sols it can cut through the Fog made out of Shadow Crystals.
And even Tears of the Kingdom showed us that the Master Sword can become stronger.
Not only did Zelda purify it to be immune to Gloom Corrosion which caused it to shatter, it also does the same ammount of Damage while almost every other Melee Weapon got a debuff of around 1/3 of its former strength (which is most likely Because the injury of Link's arm might reduce the force he is swinging the Weapons with)
Which means for example the Boulder Breaker was a 60 Damage weapon, now it is around 40 (38 is shown but claymores and similar 2 handed weapons deal 5% extra damage)
The Royal Broad Sword made 36 in Botw, now it is 24
The royal Guard Sword deals 48 in Botw, in TotK it's just 30
And the Master Sword kept the same damage values, which does theoretically means it did indeed get a bit stronger, considering that it should have 20 if it has the debuff as well but instead it still has 30, and eventhough it does only 45 damage in the Awakened state you also should remember that 60 Damage in Botw would be equal to 40,which means the Master Sword is even in the Awakened state a bit stronger.
it is just Link's Arm which is pretty weak.
@@Chris-gx1ei Lol, when it came to the weapon nerfs in TotK, I just thought of it from a game design perspective, where they clearly wanted you to power up the swords with Fuse to make them stronger, so I didn't think much of it. Link's arm being weaker is a good in-universe explanation, but I can't really agree that "60 damage in BotW is basically equal to 40 in TotK" especially since the sword does power up to 60 in TotK when fighting Phantom Ganons and Ganondorf. I understand where you're coming from, though. Everything else being weaker understandably makes the Master Sword seem stronger by comparison.
The sword no longer being affected by Gloom after it's healed is a better example of a genuine upgrade, as it shows the sword had adapted over time, but that's a more relative addition there to explain how it can now stand a chance against this specific Ganondorf and doesn't really change anything gameplay-wise. This likely won't be referred back to in later games (unless Gloom were to make a return). When the next Zelda game that has the Master Sword comes out (and takes place after TotK), it likely wont seem any stronger just because it became immune to Gloom previously.
As for Twilight Princess, I didn't mind imbuing the Master Sword with the power of the Sols since it didn't really change the look of it, only applying some light around the blade. On top of that, the power is only present when Link is in the Twilight Realm, so it always felt more like a surface-level addition to the Master Sword rather than a true upgrade (similar to fusing things to the sword in TotK). Like what I said about the Gloom immunity, the light of the Sols upgrade is more just a gimmick specific to Twilight Princess that has yet to be referred to in other titles since we haven't explored the Twilight Realm outside that one specific game.
In the end, as long as there's no drastic change in appearance to the sword when "upgrading", I'm fine with it. Raw damage numbers don't matter much since they're relative to their respective games (I lump BotW and TotK together since they're directly connected), and neither do specific changes to the weapon that are there more so for lore/consistency (Gloom in TotK) and gimmicks (Dark Fog in TP). Something like A Link Between Worlds with the Master Ore upgrades is different, in my opinion. We permanently added more metal to the sword with 4 chunks of ore, and since it's blade is now yellow/golden to reflect that upgrade, it should stay that color in later games unless we had lore explaining how the additional metal was taken out of the sword between games somehow (let's ignore wacky theories and timeline stuff, lol). Essentially, the additional power the sword gets in TotK and TP is different compared to direct strength upgrades we see in ALBW and ALttP.
I also just don't like the inconsistency of something like, "The Golden Sword was the only sword strong enough to damage Ganon in ALttP, but in Ocarina of Time the sword was capable of beating him without such an upgrade". I guess that would lead some people to argue OoT Ganon was actually weaker than ALttP Ganon, but at that point the discussion's just going to get tiresome, and I’ll just fall back to, “just keep the Master Sword’s look consistent”.
@@niftydrifterlate to the party, but oot ganon is significantly weaker than alttp's ganon, seeing as alttp takes place hundreds of years after oot during the fallen hero timeline. the master sword was essentially abandoned in a clearing for hundreds of years, bathed in sunlight and protected, yes, but while its base form might have once been enough to stop ganon, since ganon is in possession of the full triforce, not just the triforce of power, and has grown stronger in the hundreds if not thousands of years after killing the hero of time, it makes sense that the once unbeatable, divine sword doesnt have the power to do any direct damage to him anymore, thus upgrading and reforging the sword to be stronger makes sense, since that is technically what happens in skyward sword with the goddess sword once being strong enough to defeat demise, but needing to be forged into the master sword to defeat him once more.
both windwaker and breath of the wild show the master sword having lost its power and needing to be restored before becoming the true blade of evils bane, so its not outside of lore to think that when the master sword is returned to its pedestal and loses a wielder, it slowly loses power until its able to be returned to its full glory, whether it be through trials, practice, or reforging.
sorry for the rant but thats just how i see it, taking in account of the lore
So, I bought that Twilight Princess shield at an anime convention years and years ago. The handles broke from me just carrying it around. You dodged a bullet on that one. The screws holding the handles in place were less than half an inch thick.
"why is a shield tall" lol , tp was tryna be realistic and gritty, did you forget ?
ok so two things 1: i have that same master sword light and 2: i went to west edmonton mall and saw a perfect master sword replaca
I think I might've seen the same one
I had all of these problems when I tried to find a good replica years ago it’s actually crazy there isn’t a half decent replica under 300 dollars
“Who wants a black master sword” ME, I WOULD I think they look sick
saying “canonical” in a zelda video is laughable
Lmao, yeah. Perhaps I should have replaced every instance of me saying canon/canonical here to “the most consistent”.
@@niftydrifter agreed, “canonical” is a term that has no meaning in terms of Zelda
Even with dark link master sword, the blade would be considerably more black, either completely black sword and shield in the n64 game, or in 3D, the blade is slightly brighter, but it should still look darker than the normal master sword.
Have you tried Knives Deal? They sell a fairly decent-looking replica. The color of the handle is gray instead of purple, but a light coat of paint could fix that. Usually $82, so it's a bit less expensive.
Edit: I forgot to mention it's full metal, not foam or plastic.
Me & my dad tried this & got similar results, so we made our own.
Funny story, Bandai actually just announced they’re making a Replica Master Sword as part of the Proplica series. It’s over 40 inches long and it even has a sheath and looks really good.
Might I Recommend Katana Kults Master Sword
Loved the crafts u showed at the beginning of the video, it reminded me of the ones i used to do when i was a kid myself! Gotta say tho, the casual mysogyny at 3:27 and 3:49 kinda put me off lol, maybe work on that :)
…That isn’t mysogyny lmao
#1 is bashing Onlyfans models and #2 is bashing ‘fake gamers’ jokingly
@iamerror6546 it is, #1 is bashing specifically FEMALE OF models and #2 is implying female = fake gamer
@@dasideaccount 1.) Female OF models specifically are the ones that make the absolute most on there so it’s a general statement to say ‘Talentless OF Model’ and specifically mean women, who make a lot more on there compared to men.
2.) He was talking about the woman in the image, who absolutely looks like somebody who was paid to dress up like that and nothing more. As in a ‘Hey guys look it’s a woman that likes this! You should buy it!’. Plus the entire video is about inaccurate replicas and he sorta implies that you’re a fake zelda fan if you like the other ones too. Stop with your whiny ‘He’s a mysogynist!!!!!’ bullshit.
@iamerror6546 keep kidding yourself all you want, i really don't care. I never said he himself is a raging misogynist, but he was, in fact, making misogynistic jokes. Bye :)
@@dasideaccount When it’s against a woman, it’s mysogynistic. When it’s against a man, it’s all in good fun. Sod off with your unneeded comments on it
The struggle is real there isn’t an actual accurate replica
Actually, the hilt of the Master Sword is indigo which is in between blue and violet (purple).
I found one on eBay that was VERY accurate to breath and tears as well as being full metal, the only downside is that it has no sharp edge along the blade. It can stab the life out of you but nothing else so you better be a marth main with the strength of a Ike main if you used it seriously.
Love the video! I'm a fan of CZcams which pushed me to wa-
But actually, I love the video, and personally believe you should be a bigger CZcamsr with the quality of the content.
Hi, love the video. Im also in the process to buy the shield and sword.
Where did you buy your shield? Looks great!
I just got it off Amazon. Look up “Hylian Shield” and it should be among the first results.
I didn’t mention it, but the back of the shield is accurate as well, as the texturing does indeed match what’s depicted in BotW and TotK and includes a handle and adjustable belt. The belt is affixed to the back, but the handle is not, so there are two holes on the back of the shield for you to shove the ends of the plastic handle into.
Bear in mind that if you’re thinking of displaying the shield neatly on a wall or other flat surface, it’d be best to not attach the handle. Judging from the prongs it has to tightly snap into place, it for sure cannot be removed after insertion (unless you want to break the shield, lol), so I decided not to attach it.
@@niftydrifter nice, i think i found the one you mentioned. Is it hard plastic?
I found another one that looks great as well, but its metal. I might try this metal one.
Thanks again for the response!
Im still looking for a nice Master Sword 🗡️. Your video help me a lot to look closer to those details
@@joseisaacmiron1756 Glad my video could help!
Yeah, the shield's made of a hard plastic, so it’s fairly solid and doesn’t feel too cheap. I wouldn’t recommend trying to block any sword slashes with it though, lol. As long as the metal shield you found is equally accurate, I’d say go for it!
I actually have the first one with the blue blade, it’s pretty nice. Only reason I let the blade being blue pass was because of how it glows in botw/totk. That and I was desperate and that one had a nice hilt and a sheath
Ocarina of time on the 3ds was also my first Zelda game ever and I’m glad that shit was so good
So for all your trash talking about 3D printing, its painfully obvious you know nothing about the process. I looked up the seller that you say want to buy from, and have shared pictures of his sword. The blade might be aluminum, but its unmistakable that the entire handle/hilt is 3D printed, and badly. Thick layer lines, and no kind of sanding or post-processing.
If it's a joke @ 3:30 or not, it left a bad taste. I was interested in the content and now I just have the ick from you.
It's incredible to me that arguably the most recognizable sword in gaming has almost no decent replicas. My personal favorite is Rebellion from Devil May Cry and there are SO many good replicas of it with its 3, 4 and 5 designs. It's my favorite, but kts nowhere near as iconic, so why is it the one that always gets it right?
I wonder why he considers Wind Waker not canon when it's officially stated to be so?
Edit: Now I feel bad if he actually bought that sword off Etsy because of how PROPLICA came out with their preorders for an official, metal, accurate, $200 Master Sword replica... (this is not an ad, but I wouldn't mind getting paid for this)
The story is canon, the looks aren't.
(I mean, no offense to WW, and I wouldn't mind if I got a WW Master Sword, but imagine TotK Link's legendary weapon with that look.)
Then again, there _are_ theories that say that WW's Master Sword is another Master Sword.
i think he means the most consistent look
Could you do one for the Goddess Sword it's my favorite Sword in all of Zelda but I can't find a good replica of it maybe you could help me find one?
Well, considering the Goddess Sword is nowhere near as iconic as the Master Sword, it’s a bit harder to find replicas of it. Luckily for you, Heroic Replicas actually has one:
www.heroicreplicas.com/portfolio/goddess-sword
It’s just the base version, though. Personally, I’m fondest of the 2nd upgrade’s design (the one just before it starts looking like the Master Sword), but it doesn't matter what I think. As long as you like it and have $1575 to spare, I'd say it's worth getting.
@@niftydrifter It's worth every penny to get that Sword in my opinion.
In concept I like the idea of the upgrading the master sword in ALttP since you go through the game upgrading the other equipment in your arsenal, that being said I agree the master sword is so strong why upgrade it. I do actually like the design of the golden sword from the game but I have yet to see anyone make an accurate replica to that sword. Maybe that can be a topic to look into if you ever make another video like this. Great vid!!
The cross guard on that sword does indeed break. I know from experience. also, the scabbard's design is just from gold-colored stickers, which start peeling off before long.
BRO YOU LITERALLY HAVE MY BACKSTORY WITH ZELDA GAMES 🤣💀
This reminds me of when I would make cardboard gameboys, and had paper games inside that you would pull up and down the paper to play
Yes! I used to do this too, except I’d make a paper DS and have a long strip of paper with a drawn-out 2D level and slide the DS along it. I was just copying stuff I had seen on CZcams at the time, so it wasn’t really original, lol.
I also remember making a handheld based off the one depicted in this SpongeBob scene:
czcams.com/video/RuieI8kRfpA/video.html
and cutting out slabs of cardboard that acted as cartridges you could shove into it. These “cartridges” would have still images of gameplay that would be positioned right at the handheld’s screen when inserted.
Good times.
@@niftydrifterI have a foam master sword that my dad bought for me after my birthday.
was ocarina of time that messed it up after a link to the past, right?
Thinking about it that way makes me like the tempered and Golden sword more. I think I want replicas of all three Link to the past versions and the definitive master sword.
Imma get a wood lathe and smithing furnace someday let's say five years time and my dream is coming true, imma make all master sword versions!
Totk variants, altp, windwaker, even adjacents like phantom, lokomo, goddess, and six sages!
Forging and woodworking has been my dream since I saw forged in fire once but I haven't pursued anything save it be welding, thx for the idea Mr
After hearing the story about that full tang one i think its a cool blade. But its so different its no longer the master sword. I saw a redesign online *divination art or something drawer was Jason somebody. I digress, it removed the pointy bits on the wings and the tube below them. Looking more like n64s 3d model, And it also made the handle have an oval/taper upward shape.
Meanwhile not apparently historically accurate is more functional in the hand and is still very much the blade of evils bane. The full tang and it knockoff are save the wing shape barely even similar to others, the Altp has gold in common but so do a lot of swords guards.
Though I like the most the OG still. Rant: I've simply looked at it a bit two long and that strange tube part bugs me it looks so uncomfortable and me being the irresponsible man that Iamma poke or impale myself on the guard. So I want an a definitive for my wall and a light redesign for play.
I saw one guy sharpen one and cut melons!!!
3:38
I actually have this one. I got it for my link cosplay because it was the only one I could afford and whenever you shake it, it makes these sounds like there’s something inside of it. I also just kinda wish it was bigger, but other than that, it’s fine
I would say that the second master sword is better because it's actually has geometry that is perfectly aligned with using it in battle.
Although it's probably stainless which isn't favorable for that stuff.
Etsy’s selection has immensely improved since the creation of this video.
I can almost guarantee it's because Nintendo owns copy rights to the Master Sword.
Someone else selling a perfect replica would be murky legal waters at best, so more than likely they all opt for it to be slightly different to not get sued.
Drawing them yourself I think makes them way cooler.
while it isnt a accuret replica persay there is a zelda mastersword up on museum replicas that while very much takes a bunch of artistic libertys it is made to be a fully functional sword that you can actuly use and use comfortably and certainly worth a look.
Thanks guy! Hope you're having a good one!
you still have the best around ;) ....have you seen the official master sword replica coming out by PROPLICA ??? it has the perfect purple colour. I think if you can match the colour used you will still be number 1
Honestly that paper Master Sword looks pretty good!
4:59 i had this replica when i was about 16
the guard's did, in fact, break
OOT 3D was my first Zelda game too bro! (and yes, it was the Nintendo selects version)
8:15
I actually have that one and while I don't mind the things they did with it the Problem I have with it is that most of its weight is in the Blade, the Hilt is made of Sheet metal parts, the Crossguard is made of plastic but the Blade is solid and dense.
I cannot really swing it horizontal properly unless I put my hand in the Area between the Guard and the Thickening of the Blade, making the Guard actually pretty much useless.
they should have put something else in the Hilt to give it more weight for the proper balancing.
The Brass/ gold one is a mass produced copy of someone's attept to make a sword with realistic features as while the proper design is awesome, is quite cumbersome
Isnt it the design from sadiversity? Just in gold?
I'm pretty sure that you could take a brush wheel with an impact to the blue blade and it would buff right out to silver, annoying to modify something you got to make it correct tho.
Update on the Master sword replica, nintendo just recently announced an official Master Sword replica thats gonna be available in japan and i think america too!
I have the selects version of Oot 3D is there anything wrong with it?
Oh, there’s nothing wrong with it at all. The only difference between it and the original is the cover art. Many people, including me, aren’t big fans of the thick red border on the Nintendo Selects version. It’s just an intrusive marketing label that mucks up the clean look of the original. It looks more like I’d be buying an advertisement for a game instead of the game itself.
Of course, it’s nowhere near as bad as the “Konami’s Best” version of Castlevania: Dawn of Sorrow. Nothing could ever beat that, lol.
@@niftydrifter ah, that make sense
Yeah I’m not a fan of the labels either and would prefer seeing the box artwork not covered by it.
My hardest problem is even when I find decent ones or even almost perfectly accurate metal replicas is I want a scabbard to go with it mostly skyward style but I’d be fine with twilight too. And also color. I specifically want purple but so many are blue
The picky nature of trying to get the RIGHT replica is so crazy.
I’m glad I’m not the only one who does this. I got the kids sword only because it’s accurate (the sword needs to be a little thicker to)
I have ( probably ) the world's most authentic deku shield.
It's made of a piece of oak bark that was miraculously entirely separated from a chopped log.
Odds are the color hue is slightly off.
But I'd love your critique on it.
( I fully expect you'd put me in my place ) But when I look at other replicas it's not even close imo 😅
I had that foam master sword with the stubby guard. Can confirm, was a bit of let down, but it was all I had so I used it till I utterly destroyed the thing.
I really wanted to watch this video, I’m genuinely interested in the topic. But I couldn’t stop cringing at the casual misogyny that just KEPT popping up. I felt like someone was reading a 4chan board out loud to me.
literally pissed me off so much
@@drewbuescherreal
And this is why I always check the comments first, thanks man
Not 4chan XD
I didn’t see this comment but the first comment caught me so off guard, you mean there’s MORE? To be clear, I stopped watching after a bit, I knew exactly what I was getting into, a 4-Chan/Reddit post made into a video.
i bought that foam one shown around 6 mins in at a convention when I was a kid. it was fun but the paint chipped in the slightest breeze and it started crumbling after I forgot it outside for a few days :/
I have had this master sword problem forever. But that Etsy store Astoria workshop has 2 videos of a 3d printed master swordone from botw and one from twilight princess. But for some reason they're not for sale. And when i reached out to them they just told me that they have way more impressive metal replicas. But I told them they're not accurate then they never got back to me.
I have the first foam master sword (got it for Christmas years ago) I kinda want to try and modify it to make it look more accurate since I don't have the money to buy a good replica, that or try and make my own.
I would buy the second foam replica instaed it looks almost perfect after all!
The master sword is blue in OOT, it’s more on the purple side in SS, but in tears of the kingdom it’s back to being more blue than purple
Also totk now confirms that the master sword can regenerate and empower itself. The fusion mechanic means its blade takes on the form of the fusion item. The master sword can just do whatever they want it to. It’s a cool weapon because it doesn’t always need to look the same, it’s allowed to be unique in each game to fit the aesthetic
I would like to say I worked on a prop master sword before and when buying paint for it I did realize that the blade is infact blue but not to that extent. What I’m saying is you don’t realize it till you have to color the blade and metal just doesn’t look right. The blade is a very washed, slightly blue color and tinting the blade slightly blue looks far nicer compared to simply coloring it metal. Another thing is my master sword is 3d printed but what I noticed is a lot of people simply sell a file slapped onto a printer in colored filament for like 50 bucks. I actually made mine in all white, painstakingly sanded it to remove layer lines, used gap filler to hide all the seems, painted my hand and airbrushed the parts, and on top of this I made the colors much more accurate to the game (particularly botw) I’m considering opening a shop if I get efficient at making such a detailed product with permission from the file distributer ofc.