Common mistakes why a Ryobi strimmer has starting and running issues.
Vložit
- čas přidán 22. 09. 2023
- Hi and welcome to Micks Mowers
In this Video I will show you th most Common mistakes why a Ryobi strimmer has starting and running issues. apparently someone has been working on this trimmer so let's look into the reasons why it will not run..
Micks Mowers Merchandise UK Store below
micksmowersthemowerman.myspre...
Micks Mowers Merchandise USA Store below
micks-mowers-usa.myspreadshop...
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/...
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
Please follow me for more channel updates
Instagram micksmowers...
Twitter micksmowers?s=07
Banjo Hop by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Disclaimer: My Videos are for information only- i am not a professional or repair shop im just someone in a shed enjoying a hobby- If you choose to try one of the suggestions made in my videos, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Micks Mowers The Mower Man.THE SIGNS IN THE BACKGROUND ARE FOR DISPLAY PURPOSES ONLY.I HAVE NO AFFILIATION WITH THEM AND I CONFIRM I AM NOT A MAIN DEALER OF SAID COMPANIES I HAVE PERMISSION TO USE THEM - Jak na to + styl
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Dont forget to line up the gaskets on either side of the carb properly. There may be fuel inlet ports (tiny holes) that the gasket can cover up.
This guy knows his stuff.
I tend to put the carb in the ultrasonic cleaner for 30 mins every spring
Hi Mick
Get your blow torch a little closer to that fuel tank, then you will do what it needs, Burning!
Rather you than me, Keep up the good work!!!
Good to see the boss back in the shed mick a lot of work for a
Ryobi Good job mick 👏
Wow! From triage. to surgery, to "It's Alive!" ... A lot of knowledge shared in this video. Thank you for sharing.
No worries
I've been running hard. I needed some Mick while doing some much needed mechanical work of my own. Just clears the thoughts and calms the mind. Great show sir.
Thank you for the content you share. I have a Ryobi 18" chainsaw for 3 years now and love it. Truth is I have not done anything to it, but I have been thinking I should do some preventive maintenance. Best chainsaw I have ever had. I don't really use it very often but when needed it all ways works.
If you do not use it often i would suggest switching over to a canned alkylate fuel like Aspen if you have not done so already. Worry free start up for 2 years guaranteed.
Thank you@@waynestefinashen239
@@user-sp7kt7vw7w Your welcome our neighbour has been buying the Kinetix 2 stroke alkylate fuel from us for 5 years now and all 5 pieces of 2 stroke equipment you owns fire up and run fine but he is using it on a regular basis so very expensive. Issue always was that he was mixing his fuel with too much oil and would regularly need carb cleaning which was costing him way more than the annual useage and purchase of the Kinetix fuel.
Well done Mick , some great information in this one , you really are unstoppable bud keep at it
Very nice fix! Thank you!!
Awesome fix's Thank you for the video hi guys
Another great video and always like seeing u include Riley boy in your videos mate Mick I’m so thankful for you and others that takes the time and initiative to do these videos on a consistent basis that helps dummies like me learn how to repair different equipment. If I can do it ANYONE can do it through the help and guidance of professionals like Micks mowers The Mower Man. And Bonus I’ve met some great people on here and made some GREAT FRIENDS. THANKS 🙏🏻 MICK FOR ALL U DO AND HAVE DONE FOR THE small engine repair community it’s much better because of you. (Close knit community). Everyone is so willing to help others in anyway they can. Tell Riley boy and Mrs P we said hello. Thanks so much Mick The Mower Man
Your welcome mate
Mick. Just watched this video and I feel that I need to caution you against wetting the Putty with saliva. Before I retired we had salesman from a company that use to sell these types of two pack compounds he did the same as you did.
After a while he ended up with cancer in his face and had a large part removed.
So beware.
Regards
Peter
HI Mick.
I feel like that sometimes with Ryobi machinery at times lol.
I agree about the fuel (I bought one that instead of 50:1 2 stroke mix they had put a 50/50 mix), but in the owners manual it says to get it retuned after 4-5 tanks worth of fuel it's used.
It normally just requires a carb tune (special tool required) to get it to run properly.
What you have shown is a typical example of people trying to fix things, and not realising that if you need to drill it, then you're doing something wrong e.g. the fuel pipes to big.
I've had 2 mowers come in where the owners have drilled the pop rivets out to repair the pull cord (instead of undoing 3-4 bolts)! DOH!!
great video for the holes in the gas tank you had if you wanted to fix them you can take a soldering iron and let it heat up and rake on each side to melt the plastic and Slide the plastic right over and fill the holes in
Yes but had mixed results mate
Nice fix Mick, loving the Tyrll putty.
Love you guys . Big hello from Melbourne Australia . Cheers !
Gday mate
Very interesting Mick. I'm working on one of those now my self. Very informative on the carby fix.
That fuel tank is made from HDPE. Pretty much nothing sticks to it. I hope it holds.
Great in depth video Mick. My 20 year old Partner strimmer isn't running right, fuel lines may be the wrong way round, after I messed with it. I'll go and check. Thanks for the advice.
Thanks for making this video. I inherited this very strimmer off my dad and the filter was gunky and rattling about the tank. I'll find out tomorrow of the problem is something else but I'm delighted to have dealt with that. 5 minutes work and hopefully it can be put to good use.
It'd running great, maybe a little speedy - will watch the tuning instructions at the end - delighted.
Very nice work 👍👍👍👍
Great video Mick, I love working on mowers but I just like how small two stroke equipment is, I can fit like two mowers in my shed, but like 10+ strimmers, it's better if you don't have much space to work on two stroke equipment, but I actually prefer mowers, it's just space, thanks for the video 👍
Nice one Mick might look at my old one tomorrow feels good compression got spark tried fuel in carb but nothing.
I have found stripping and cleaning these little carbs a bit hit and miss. Usually end up replacing the carb
Nice work mick sir 👍 🔧
Fantastic fix mick there is nothing wrong with a ryobi lol I've got a ryobi rbc30ses strimmer have had it from brand new in 2008 and it has had a lot of hammer have had no problems with it at all just new primer bulb and a new strimmer head and it is still going strong 👍👍👍👍
NICE VIDEO.
Just happen to come across this. Question i have is why not just go ahead and clean everything instead of just putting stuff back together oily and dirty? If you're going to do something do it right. A good thorough cleaning of equipment is part of regular maintenance.
Just “won” one like that but with the starter motor, no battery or charger though, but pull start mech is corroded and jamming, it came with the strimmer end , extension, and the hedge trimmer ends, so I’m hopefully I can get it running.
Can't beat Aspen alkylate petrol for keeping rubber soft and carbs gum-free. Great video Mick, nice to see a different brand too.
Ta for watching mate
I can't see how it can suck in air if the fuel line is submerged in the the petrol. All the missing grommets do is prevent fuel from leakilng out. You can run a machine with the fuel cap off.
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
i agree with you on those are not a good weedeater they are a pain in the neck i don't like working on them. the four stroke are the worst.
In my experience the ryobi stuff is usualy better quality than a lot of the other cheap brands. The problem is that because of the price people don't really look after them.
Also with the tank could you not have drilled a larger hole in the middle of the 2 making one big hole for a grommet?
No too far apart mate
Was wondering if I should bother saying that, sure most brands come like that from factory
Thanks for the luv mick
Nothing wrong with Ryobi not top end but not bad quality. Well done on the repair Mick
well done mick brillaint one mate
No worries mate ..
Hi i have a qualcast te30h strimmer can you tell me what spark plug it uses please
Nice repair and tune Mick, hello Reilly Boy😊
Hope that your new compressor hasn’t broken?
Ive spent hours working on these strimmers. At one stage I had one in use one acting up and one in bits for spares. The earlier models didnt have spark arrestors but one overiding issue I saw with these units was ignition coil !! Symptoms are - works for 20 min and starts fairly easily but then stops when hot and cannot be restarted till cool no matter what. Seen this happen twice after numerous carbs carb rebuilds etc etc. The non-Chinese coils are expensive and make the unit not worth repairing. After the gauze the first thing I would have tried was 1/4 turn CCW on the Low jet.
I'm trying to get my Ryobi strimmers going without much success.... Do the cárb get blocked up due to no filter
Had my Ryobi strimmer 26 years , apart from replacing the clutch 10 years ago it's been great up till this year. Treating it to a complete overhaul, well worth doing.
Good on ya
Micks Mowers Merchandise UK Store below
micksmowersthemowerman.myspreadshop.co.uk/men?q=D1
Micks Mowers Merchandise USA Store below
micks-mowers-usa.myspreadshop.com/all
I would have tried running the new lines through the old lines. Just using the old lines for a sleeve.
Hi to Riley boy🎉
Have your feelings on Ryobi machine to Mìck my mate BGN barries gardening needs hates them too. We burn the exhausts out sometimes half àn hour or so to clean them out. Great vid buddy new viewer subscribed too
Noticed you're tuning it on half choke..
Great video. Quick question, what pliers did you use to hold the gause?
At what time in the video?
@@themowerman at the beginning when you cleaned the gauze with the blow torch
Hello Riley boy hope you are well
Just wondering why you didn’t you just put rubber o rings on fuel tank and fuel line
Blow torch and gas tank.
Where do you get the Taryn putty from?
From taryl fixes all shop...
my ryobi would'nt start there was crap inside spark plug boot
That would do it
Do you have a coil for a challenge mower (Argos brand ) ours died doing a free clean up today
No mate sorry
@@themowerman no problem Mick , is they anything else that could stop the spark , I've tried a new spark plug
@@ma.creations20 micro switch or coil wire..
@@themowerman by coil wire do you mean the one that goes to the micro switch or the one going to the spark plug , cheers Mick
@@ma.creations20 yeah mate .. and check the switch
Fun listening to true English (:
Lol thanks me old mucker
Mines a pig to start on the pull cord. I now know why it’s electric start lol
Araldite is the best answer.
my nightmare machines mick
Lol... I hate them... How you doing mate
its needs to stay on half choke
Ryobi kinda like Tecumseh mmmmm mmmmm good I mean kinda like a Kia or Ferrari depends on your wallet size like Nike golf balls over Titleist yeh no like a Creamsicle over a hot fudge Sunday not 🥴 You get my meaning !
Why are you using WD40 on everything instead of carburetor cleaner?
Best I can and because it works .. simple
I've got a 2-stroke Ryobi strimmer I've had for about 10 to 15 years now. They are pretty cheaply made, most screws go into plastic, for example.
It's OK and starts / runs fine, does the job, but only after some fiddling.
From new, the mixture was so weak - probably in the interests of emissions - it wouldn't run at all (that certainly kept the emissions down). The adjusting screws had no slots so you couldn't adjust it, but I got round that with a Dremel, and after some setting up, it started and ran fine.
Then I found it would start from cold no problem, but not when hot, needed to leave it to cool again. Really annoying. After a some faffing around (I've done a lot of kart racing so am pretty familiar with 2-strokes), the problem proved to be no spark when hot. Hard to prove as when you take the plug out the spark looks fine.
The cause was just insufficient HT voltage. When cold, rings don't seal as well, compression is lower, necessary voltage is lower, but when hot, it all goes up and the coil couldn't generate the voltage. Probably if I had managed to spin it over fast enough to get the voltage up it would have been OK.
Used to have this many years ago on small cylindrical CEV kart coils when they started to breakdown due to vibration.
In the end I got around it by making sure the magneto coil to flywheel gap was as tight as possible, and that the spark plug gap was on the low side. Since then it's been fine, but it's undoubtedly marginal. Possibly a replacement coil would be better, but it's OK at the moment - and maybe it would be a waste of money.
Maybe that'll help someone.
Cannot say I like the quality much, but you get what you pay for. I'd much prefer a Stihl, but you pay Stihl money.
Good comment mate
@@themowermangot a Dennis Premier mk 1 30" sitting in the garage if you are interested.
@@edcbabc email mate micksmowers01@gmail.com
Does your dog bite.🤣🤣
Love your videos but you are way to close to that gas tank with the torch
Ohhh don't worry... I was down wind
lol@@themowerman
You can't have a Ryobi "STRIMMER", Strimmer is a Black & Decker trade name!
Wrong gas/oil mix is the problem with 2 cycle equipment plus everything else is a problem with 2 cycle equipment like the carburetor is needing a clean up and the.fuel.fliter is definitely not in great shape let's not forget the spark plug ethanol free gas will help with engine issues like the carburetor
Next time use your time wisely not on a Ryobi
My first trimmer was a 2016 Ryobi S430 4 cycle. It's still my trimmer in 2024. Zero issues, starts and runs every time
Ryobi is pure dirt. Never buy this crap.
My 25cc is pretty good. She operates in different ways than others of her kind.
I've used my Ryobi with several attachments and has done well for several years.
Mine is powerful with elegance. When it runs it is all out for 10 minutes at a time.@@binarybox.binarybox