Easy DIY Wire Tree With Beads -Anyone Can Do
Vložit
- čas přidán 25. 07. 2024
- Hello, I enjoyed making the previous tree so much that I made another one that is larger and has glass drop beads as blossom. These trees are a really easy wire crafting tree to make with the addition of the glass beads. Anyone can do this and there are not many tools needed.
🎥 CHECK OUT THIS VIDEO on how to make a cute popsicle stick house: • How to build a Cute PO...
📖 Colouring books available here: stevemcdonaldcrafts.com/
📬 TO POST something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
📺 CHECK OUT MY OTHER CHANNEL on using Resin: / stevemcdonaldartsandcr...
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
✍ I HAVE A NEW website and shop: available here: stevemcdonaldcrafts.com/
💻 As an amazon associate, I earn from qualifying purchases.
(USA👍) Here is my amazon store for the USA: www.amazon.com/shop/stevemcdo...
(UK✊) Here is my Amazon Store for the UK: www.amazon.co.uk/shop/stevemc...
Or see the individual links below for the items used in this video:
LINKS FOR MATERIALS USED FOR THE (USA👍), (UK✊), (Canada👋) and (Australia 🙌) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) 0.5mm (24 gauge) Copper wire: amzn.to/3ujYnCc
(USA👍) Jewelry Tools: amzn.to/3a7Jlsm
(USA👍) Plastic ties: amzn.to/3I7TkdT
(USA👍) Glass Drop Beads: amzn.to/3a84930
LINKS FOR UK (UK✊ Only)
(UK✊) 0.5mm (24 gauge) Copper wire: amzn.to/3ODwEVb
(UK✊) Jewellery Tools: amzn.to/3bDKCYx
(UK✊) Plastic ties: amzn.to/3Am5wpl
(UK✊) Glass Drop Beads: amzn.to/3yygtTz
LINKS FOR CANADA ONLY (Ca👋 Only)
(Ca👋) 0.5mm (24 gauge) Brass wire: amzn.to/3yEluu4
(Ca👋) Jewelry Tools: amzn.to/3ujq0vp
(Ca👋) Plastic ties: amzn.to/3IdBGFx
(Ca👋) Glass Drop Beads: na
LINKS FOR AUSTRALIA ONLY (Au🙌 Only)
(Au 🙌) 0.5mm (24 gauge) Brass wire: amzn.to/3nwzcsz
(Au 🙌) Jewellery Tools: amzn.to/3P0czrW
(Au 🙌) Plastic ties: amzn.to/3NyQ5x3
(Au 🙌) Glass Drop Beads: amzn.to/3AmA0Yv
Easy DIY Wire Crafting Tree With Beads -Anyone Can Do
Please remember that these videos are for entertainment purposes only. If you are attempting any of the projects shown in these videos then I am not and cannot be held responsible for your health and safety. Ensure that you take all the necessary safety precautions when undertaking any crafting project. Stay safe at all times.
00:00 Introduction
00:28 How to measure and cut the wire
01:58 Step one of making the wire tree
02:57 Step two making the branches
05:10 Step three adding the beads
07:42 The wire tree in all its glory - Jak na to + styl
Thanks for watching! please check out this next video for more fun crafting projects: czcams.com/video/tdk3mqrstjk/video.html
THANKS FOR THE LINK!!! 😊
great!!!! more of that please. And maybe something with kneadable concrete as well 😇😍 and than those two combined with eachother
WOW! That tree is stunning! I must get some wire and some green seed beads and make one of my own. You are so good at making those wire trees. I love how it looked against the dark stand. You could make a moonlight diorama to put it into and it would look all ethereal and ghostly. I just how long and graceful it came out and I really enjoyed watching you make it. The seed beads really set it off don't they. You really are a very gifted man Steve. God bless you and all your family with peace and joy, today and every day.
Wonderfull beginning of what I want to do, attach the root wires to a polished rock.
I love that, so pretty. Not sure I have the patience. Looks fantastic. 🌺🌺🌺
That's really pretty.
I absolutely love it Steve.
thanks this is helping me with my project
That is so cute Steve
The great idea. Did that fairly easy.
I´m going to try this with another touch, incorporate wool!
Hi. Marvelous! Yes more!!
Absolutely beautiful 😍
Very pretty
Dang that's awesome. You made it look so easy as well... side note soak your squeaky rusty plyers in vinegar overnight. Then use a brillo soap scour pad if needed. You can also use things like carburetor clean or break clean. Then treat with oil.
Yes would love to seem more with this tree
That is gorgeous! You are so talented!
Stunning
Luv the lil tree 🌳 💕
This is fantastic! Thanks 😊
As always, this is amazing!!!
Ooooo…. That would look soooo good in a cube of resin with some lights :) ….. there's a project idea for ya my friend!!!!
You’re amazing.
Amazing! What a beautiful tree 👍😍👍
Years ago I used to sell miniature trees with coloured glass beads, the trees imitated Japanese Bonsai trees. They were set in shallow ceramic pots with ground glass imitating gravel. Very pretty and very popular at the time. I cannot remember where they were made, we bought them through a wholesaler.
Beautiful 🥰 l love it❤
Great job Steve 👍Look great.
Gorgeous
I really want to make a big one now.
Wow that's amazing 👏 😍
So creative!
Excellent
Beautiful!
Beautiful!!!!
Merry Christmas may God-bless you and yours.
Thank you so much for explaining this I have wanted to do a tree for so long.
I would like to try this now. Thanks
Wow, cute
that is lovely
Amazing as usual. I want to try this for sure
Beautiful ❤️
WOW just WOW! You make things look so easy, im definitely going to have a crack of this one. Thank you 👌🙂
Very cute. I will try that.
Wow!!!! This is beautiful. You really make me want to go out and get some wire and make me tree.💜💜
🎉soooo beautiful 😍 u are awesome I love ur voice as well 👏 👏 keep it up 😊
I'd love to try this
This is great!
You should use one of your worn out coaster molds for the tree base.
I really really like that & I would like to see how you'd mount it onto some type of base.
Amazing 🤩
Thank you for a great video .. I am just starting out :)
Woo love it ❤️
thank you I always wanted to know how to do that
Absolutely gorgeous!!!
Clear Gold beads, clear green, in different hues, the possibilities are endless.
I think a copper tree would be stunning too Steve, maybe you'd be inclined to make us one?
I've always wanted to make one of these! Now that I know how, I'll be pumping these out to sell! Thanks again for your wonderful videos!
Arghhhhh seed beads - sent from Satan!!! Loving the trees, Steve. They look great over a cabachon, when making jewellery xxx
I’d like to see this in a resin piece.
Thats lovely Steve, Love the way it stands on its roots. Various coloured beads would look nice as well maybe as a Christmas ornament. Puts me in mind of my 1st craft project when I was a teenager. I made a small tabletop Christmas tree out of odd bits of wire my dad had left over and covered it with tinsel. looked good and you wouldn't know it was made of scrap wire
Awesome!! I did something like that many years ago and still have them.... Have you tried using leaf beads or tri-beads? They show up nicely.
Maybe use this one you made in a seen inside a pyramid??? The only thing I don't like about these is that they are hard to clean depending on what you put with them.
Stay safe, you do you, and stay creatively crafty!! 👉👉👍👍🔔🔔🦋🦋
This fairy-tree is sooo beautiful !!! 🙂
I absolutely LOVE wire trees, and this outstanding! LOVE it! Thank you for showing us how it's done! 😊👍❤
Beautiful, Steve!! I love those trees!! Never thought of making one myself!! Thank you for the inspiration!!!
Please make something with the tree you have just made AWESOME video steve McDonald
Love the clever trick of cutting the wire. Thank you for sharing!!
I have always wondered how these were made! Thank you so much for the tutorial. Greatly appreciated!
This was so cool, watching you pull a 100 year old Oak tree 🌳 out of a messy pile of wires. I think it would be beautiful to use green beads (leaves) or pink or white beads (for little flowers)
What a fun project. Definitely something to while away a rainy day.
How lovely!!! This would look so nice in an ornamental holiday scene!
You constantly amaze me with all the ideas you share ! Thank you ,Steve !
My mom's boyfriend made such trees in the 90's as gifts for his beloved. He used little semi-precious stones and set them on real little rocks or quartz 😊
I love these trees so much! Your beautiful tree brought back some nice memories 💖
That is lovely and it always gives me happy chills when something I make inspires peoples memory.
@@SteveMcDonaldCrafting ♥️
You are so creative and I so appreciate you sharing your talent!!!
This is beautiful. Make a scene in your pyramid mold!
Its beautiful, the beads set it off lovely.
Yes, please. Show how to mount it and all the other things you said. Looks good!
Totally, that's super cute! Yes!
Wow!!! I really want to try this. It’s stunning!
I’d love to see how you’d display it. Beautiful
Omg my eldest loves those trees so this would b a lovely project we could do together so thank you xx
OMG this is so awesome!! It would look great in the courtyard of the castle that you still have to make! The beads really set this off! Thank you Steve 😊!!!
Well done Steve, I'm glad you had a go with adding the beads. It looks fantastic 😍
That turned out so incredibly gorgeous!
Absolutely beautiful, Steve. Thanks
Tree-mendous! Absolutely love it Steve 😍
My mom made these in the 60s using all kinds of different types of gemstones.
FABULOUS! It looks absolutely stunning x
How gorgeous is that? Can’t wait to try one x
Wow! That is so beautiful! I love it!
So pretty .... love the way it came out
Making these little trees are very relaxing I found 😘. Yours looks very pretty. 😘
OMG that is gorgeous Steve. I am going to have to try that. I think it would also look great in a scene with resin.
I know this video is a year old but I’m slowly getting through them all, but this is stunning !!!!
HI Steve, Awesome 👍 I would love to see you do a Christmas winter Wonderland scene with the trees you make 🙂 Lin
Beautiful, always wanted to try and make something like this but have never got around to it. I'd love to see what setting you would put this into. Always an inspiration 🤓
I've seen these lately sold with crystal chips instead of beads, and they're ridiculous. I'd like to make one though! Thanks as always, I just happen to have some amethyst chips w/holes and tons of wire.
❤
Love this tree idea! I have some mini gemstone chip beads that I think will look awesome. About how many times did you wrap the wire? I don't want too little or too much.
Absolutely stunning, i might try to make a wire tree this way myself, i dont know if u mentioned it but whats the gauge of the wire?
I have a question for you about resin: Can you seal royal and langnickel engraving art with resin? Because I would really like to know.
Make it easier on yourself and your hands by using copper or even aluminum wire.
How long is the wire stripe?
What about a family tree?