Block Plane Tips: How to Use It, When to Use It, and Why it's Awesome!
Vložit
- čas přidán 21. 12. 2022
- The Block Plane is probably the handiest woodworking Plane in the workshop, it is capable of both big and small jobs and its size makes it an essential all-time workbench tool; Block Planes come in 2 basic models, inexpensive, lighter weight for more transportable carrying by carpenters, on on-site workers, OR there are the much more robust and heavier block planes that boast more controls for fine-tuning of the blade and heavier frames for smoother more sustained use; Block Planes can do quick work of smoothing saw, jointer and planer marks, trim down thicker wooden parts and make joinery easier by allowing small amounts of wood to be shared off and all this at in a somewhat healthier atmosphere because planes don't create wood dust that can be inhaled, but more often create heavier shavings and chips' Block Planes and a true woodworkers go-to tool.
********More Woodworking Plan Videos*********
Bench Plane / Hand Plane Right Angle Jig for Surfacing: • Bench Plane / Hand Pla...
How to Sharpen a Hand Plane & Chisel Sharpening w/ the Mpower Fasttrack MK2: • How to Sharpen a Hand ...
Sharpening Jig for Chisels & Bench Plane Blades: • DIY Sharpening Jig for...
How to Make a Chamfer Hand Plane: • How to Make a Chamfer ...
************************
#BenchPlane #BlockPlane #HandPlane
Read the Full Article on these Block Plane Tips here - bit.ly/3HRS6oR
*** Taylor Tools Affiliate Store - lddy.no/18zkg
*** Amazon Affiliate Store - www.amazon.com/shop/woodworkweb
*** Magswitch Affiliate Store - mag-tools.com/discount/COLIN_...
*** Canadian Amazon Affiliate Store - bit.ly/38h1uib
*** T-SHIRTS and Fun Stuff - teespring.com/stores/woodwork...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb.com
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb
Kunz #9-1/2 Low Angle Block Plane - lddy.no/1ed93
Kunz #220 Low Angle Block Plane - lddy.no/1ed8w - Jak na to + styl
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
This is what sets Colin apart. He isn’t afraid to revisit the basics! Every day, folks are coming into woodworking, as a hobby or a trade career, and these things are best done fresh! Outstanding video!! I enjoyed watching immensely! Keep them coming Colin!!
I remember back in the 80s I was in 5th grade, how Colin was demonstrating planing a bit angled so the blade bites a bit better, was exactly how we were taught at school how to plane.
Love this channel as it keeps the art 🎨 alive. CNC Machines has almost killed it in the UK 🇬🇧
I must confess I’m a block plane addicted, I believe I have 5 or 6 block planes each a little different for specific tasks. Take Care Colin and to the wood work web family.
Merry Christmas.
Thank you for the reminder of how much a block plane used for various tasks in wood fitting. I have used my trusty Stanley low angle block plane on site and in the shop for 40 odd years but a couple of years ago I treated myself to the Veritas DX 60. I have to say what a treat it is to use. It is so comfortable, well balanced and the adjustments to the blade are quick and easy to dial in due to the precision machining. The apron plane you have there is probably the same quality and also comfortable to use.
great info
Thanks so much as always Colin. Merry Christmas!
This is almost therapeutic
Wow. I learned a lot of tricks. This was a winner.
Thanks for this video and for sharing your experience
You always come up with great ideas very interesting
Great tutorial. I bought a Record 220 back in 1983 and still use it on most projects.
Still my go to plane!
Regards James
One Handed Maker
Fantastic tips, Colin! Thanks a bunch!!! 😊
Stay safe there with your family! 🖖😊
Merry Christmas and happy new year!
Colin, you make it look so easy. I'm having a hard time mastering the hand plane, either too deep of a cut or not enough. Guess thats the difference between a pro like yourself and a wood butcher like me.
Thanks much Colin!!!
solid tips...every one
thank you and happy holidays
Thanks Colin
Great as always Colin, I will watch that sharpening video for sure! Happy Holidays
Some really great idea's 💡
Thanks Colin from Bill inNova Scotia. I always enjoy your entertaining and informative tips. 👍
This was so helpful! Thank you sooo much!! Could you maybe do an intro to planes? Different kinds, uses and care/dialing in? Happy Holidays sir!!
Excellent video
Yayyy nice tips. Wishingvyou very happy and more successful 2023 😎💛
Oh, he says, is THAT how you set the blade depth, after decades of guesstimating. Thank you Colin!
Nice Video, thank you.. And nice watch 👍🤗🤗
Very helpfull vid. Thx Collin.
Terrific video Colin! Happy Holidays to you & your family! 👍👍🌲🌲
Thanks, and MERRY CHRISTMAS AND HAPPY NEW YEAR, keep the viedos coming and the greatvtips
Nice video just in time because yesterday i bought my first block plane. I am from Europe and this type of plane is not very popular there where i live but i picked up nice vintage one.
thanks
Alright already I'll buy one! :)
Thanks a lot
Merry Christmas Colin!
👍👍👍 Thanks
What about adding a few wipes of wax or light oil on a rag to the bottom of the plane so it glides smoothly on the surface of the wood.
Thanks, Colin, for another excellent teaching videos. I like your plane. Can you tell me the manufacturer and model?
Thank you Colin!
How do I find that sharpening video you did years ago.
I have that same little jig, to get a 25 degree I just ordered a magnetic angle finder hoping that’ll help. 🤷🏼♂️
Hi excellent presentation. Could you name your favorite brand and also could you show how sharpen the blade. Thanks
love your videos..........I watched one about left-handed tape measures............ I've searched the internet and haven't found any.....Where can I find one..................
Thanks for this one, great tips but the sitting of the plane on its base is purely a choice. No harm will come from sitting it on a bench. Merry Christmas!
Where is the link for the German block plane?
Can you use this tool on a piece of composite decking?
If I am looking into getting my first block plane what size should I consider? Mostly for Rounding over edges and other small jobs
There is no link for the German block plane
What is you opinion about Rali planes from Switzerland?
I need to plane an edge / side of the plank, but suspect it'll split at the end as it's against the grain. What tool could i use to do this?
10:18 Block planes take a nice smooth chunk out of your knuckles just like they do with wood! Watch your knuckles!
Tearout on the cross grain? The tenon has no long grain on the end.
I'm starting to get tools to start woodworking. This is very helpful. How do you tell if a used block plane is a good one or just a cheap one?
Always buy the best, which is not always the most expensive one, and you won't be disappointed. Buy the best and you will only have to buy it once. It will be an investment. It will last you a lifetime. Do your homework since you are buying the tool you will use for the rest of your time woodworking.
Great video. Do you camber your block plane blade? I just got my LN block plane and getting it setup
Traditionally, you do not camber the blade, that would be fine on a smoother plane such as a number 4.
BUT, you can if you want to use it like a smoother for taking off a thousandth of an inch or so.
All you really need is after sharpening the blade with your finest grit, give a few strokes with pressure on one corner, and then the same strokes with pressure on the other corner.
Usually I just smooth with a #4. First of all I use my block plane for a number of tasks that need a heavier cut. I use my smoother just for smoothing. Second it can take too much time to smooth a surface with the narrow blade. But I might want to use it for making a small box.
I always struggled with manual planes. I only plane for installation purposes, like door slabs. So I use electric ones.
Thanks for the lesson.
Same here, could never do well with my planes. I watched a video by 3x3 Tamir and she showed how to sharpen with diamond plates and an angle guide. So much better and fast to put that micro bevel on. Really enjoy it using them now.
Better off planning the long grain first. FYI
When I do a roundover I always use a router for speed and accuracy.
My old block plane doesn't have a depth knob. I have to tap it forward. Takes forever to adjust. Not recommended. Get one with a depth knob.
👍
How about using a block plane that doesn't have all the added features shown here. A plane that only has a tightening swival. No forward-backward knob and no mouth closing devise, or side poivoit sid eto side leveler. Show us how you set the plane to cut a very thin slice off a piece of wood. I say this because it is very hard to set the cutting distance on these type of planes, but if setup right, they work equally as well as a more expensive plane with all the add-on features. It's very hard to set these type of planes u8p to cut a very micro-thin slice off the wood stock
Colin I have been watching your videos and benefited from your videos for years, but I personally believe that you are a little off base with this one, first off, Rob Cossman, Paul sellers and many other fine craftsman have busted the myth of not laying your plane down onto its sole, obviously no matter how your laying down your tools hopefully your doing so with care and common sense, but as far as damaging a plane blade certainly not, in fact laying them down on there side or otherwise can actually knock your plane blade out of square, Many plane blades are actually setup with the slightest of a tap on the side with a soft face mallet or the heel of your palm. Also the other tip of placing your block plane or any highly crafted hand tool with the finest of surface finish usually lapped within microns of measurement between the jaws of a rugged vice …bad idea and good way to distort a fine hand tool… I mean heck if your not caring enough to lay your plane down on its sole with some caution .your plane is really going to love the serrated jaws of a vice. Sorry Colin, but you have and can do better. Cheers
I stopped watching after the "always lay your plane on the side".
And it cuts better at an angle because............. and this doesn't work on regular knives because............
Old wives tales not laying a plane down
My adventure with woodworking started with Woodglut.