I really like how you show everything up close ,breaking it all where the average person or someone not to familiar with woodworking can really understand and get it done, great job thanks.
I literally rewatched a few times to take notes. I’m building a gate to keep out dogs, I’ve never built anything before but I’m tired of waiting for someone else to do it. Next I need to fix a door. Lol dogs kinda ate the bottom.
Thanks, tired of our 4 dogs ripping up screendoors within a day or two of intalling or repairing. Added balusters to our breezeway between garage and kitchen and added this gate to match. Just what I needed and dogs can't destroy it👍.
Perfect video brother. Straight to the point, enough detail but not too much, enough demonstration but not too much. Gotta do this tomorrow. Thanks man.
Nice job! You ‘ Nailed it ‘. TY still waiting on help to build, home with Lung Disease from COVID-19. I have two Support Dogs, my back porch has no gate door😔.. All wood deck no gate door. Single prior Healthcare Worker that’s how I caught COVID, no more COVID but severe complications Lung Disease.
Excellent tutorial!! Should have watched before I tried to cut angles for my first gate cross brace🥴…oh well that lesson only cost me a 2x4 & a visit to the confessional 😉🙏 Thanks so very much for sharing your knowledge.
Thank you so much for this! I have very similar setup as you. Followed this perfectly. Can you make a sliding rail gate for the same type of deck you have?
Great video! Quick question please. I went and measured my width on my deck stairs and the bottom measurement was a quarter inch shorter than the top. Top was 42.75”and bottom was 42.5”. How do I approach this? Thanks.
Make it to the smaller size the 42.5" Or just split the difference, we don't build stuff out of square, (unless on a boat or special reason, split difference or build smaller size... usually split difference 🥸
Yes, one screw in each probably would be a good idea. Plus I would consider (or ask customer if this is a job) if they would like a top rail on the gate that matches the rest of the fencing. Done very well.
Where are at. In Canada it is illegal to have a gate or a door at the top of stairs. The building code also says. The spacing between balasters are to be so that you can not pass a 4"ball between. That means that the spacing needs to be less than 4" . Not 4" between.😮
Idk i like it when my top and bottom rails line up.. the total shortness aswell as the short balusters are messing with my eyes, its not pleasant in my opinion.
When tu said 4", I thought 3" that ,7 I had to learn from experience, tu like my US Navy Sea Bee playlist for Enlistedman and Officers who are motivated to rank up on ytb videos by CIA O29 US Navy Seal Devgru 6 SWCC Officer O19 Kaiser Tsar Matthew Floyd Marston Romanov Windsor 2 Rothschild Rockefeller Cartier 2
I really like how you show everything up close ,breaking it all where the average person or someone not to familiar with woodworking can really understand and get it done, great job thanks.
Thank you for the video! My husband and I built and hung 2 gates for our deck over the weekend using these steps. It was super easy to follow!
Great job with presentation. Clear and concise. Just what I needed for the finishing touch for my deck. Thanks!
Mission Accomplished! Just finished our gate and it worked perfectly. Just need to make one more.
I literally rewatched a few times to take notes. I’m building a gate to keep out dogs, I’ve never built anything before but I’m tired of waiting for someone else to do it. Next I need to fix a door. Lol dogs kinda ate the bottom.
Thanks, tired of our 4 dogs ripping up screendoors within a day or two of intalling or repairing. Added balusters to our breezeway between garage and kitchen and added this gate to match. Just what I needed and dogs can't destroy it👍.
Perfect video brother. Straight to the point, enough detail but not too much, enough demonstration but not too much. Gotta do this tomorrow. Thanks man.
Thank you so much for this video. It’s super helpful and easy to follow with less talking and more showing!
Good work. Great instructions, especially on the spacing.
Great job, you make things look so easy&your easy to understand
Nice job! You ‘ Nailed it ‘. TY still waiting on help to build, home with Lung Disease from COVID-19. I have two Support Dogs, my back porch has no gate door😔.. All wood deck no gate door. Single prior Healthcare Worker that’s how I caught COVID, no more COVID but severe complications Lung Disease.
Very easy to understand and I am for real, just about to get around to doing a wooden gate. A great Find this vid. 👍
Great help!!! Thank you from a novice gate builder!
Thanks man , never understood how to get even spacing
Nicely done. easy, simple and very detailed. keep up the great work brother. thanks
WOW! That's great video. Thank you for all the details Iwould start to build one for my deck.
Excellent tutorial!! Should have watched before I tried to cut angles for my first gate cross brace🥴…oh well that lesson only cost me a 2x4 & a visit to the confessional 😉🙏 Thanks so very much for sharing your knowledge.
Nicely done. Exactly what I w was looking for!
Just built this using picket fence boards instead of deck styles. Only took a couple hours to build and hang. Thanks!
Thanks so much for the video! It worked like a charm!
Just finished. Great video.
great job new to the channel now Im going to try this.
Great video dude!
Great job, only thing I would change is the height.
The reason we made it low is for the kids coming up the stairs. They can reach over the gate and open the latch!
Nice job Sam help me out building my gate.
I sure wish utube doesnt put the writing it gets in the way. Great posts
That’s an easy fix. If you tap the video and click “cc”, it will turn them off. Hope that helps.
Thank you so much for this! I have very similar setup as you. Followed this perfectly. Can you make a sliding rail gate for the same type of deck you have?
Even spacing is as easy as find the middle and space evenly as you work out from the middle. Always a different way to skin a mushroom
Only thing i'll say is that at the very least youll want to angle the cut on the top of those balisters.
Great video man. Planing to do one😊
Hi Sam I'm 63 and I think I can do it thanks
looks very good 👍
Great video! Quick question please. I went and measured my width on my deck stairs and the bottom measurement was a quarter inch shorter than the top. Top was 42.75”and bottom was 42.5”. How do I approach this? Thanks.
Make it to the smaller size the 42.5"
Or just split the difference, we don't build stuff out of square, (unless on a boat or special reason, split difference or build smaller size... usually split difference 🥸
Best video!
Im about to build me a gate now thanks to your help Sir 😎😎
Good Video. I use a fraction calculator on my phone. Occasional ad, but helps me a lot!
How do you determine the size of drill you use for your pre-drill and counter sink?
Good job ...Thanks
Very nice professional
Would help to fasten each balister to the cross brace.
Yes, one screw in each probably would be a good idea. Plus I would consider (or ask customer if this is a job) if they would like a top rail on the gate that matches the rest of the fencing. Done very well.
What size countersink bit did you use?
A crazy question one could make the rails recessed for less thickness but extra work.
For a wide porch staircase, would you just build two gates and have them latch in the middle?
Yes or put a wheel on the bottom of latch side of gate.
I'm going to try this myself ....
How did you screw the bracing?
👍👍
Awesome video! Very informative.
Rarely is an opening square on a deck
Does one need the diagonal cross board? Is there a purpose for it or can someone skip it?
... And cheaper
Thanks
Where are at. In Canada it is illegal to have a gate or a door at the top of stairs. The building code also says. The spacing between balasters are to be so that you can not pass a 4"ball between. That means that the spacing needs to be less than 4" . Not 4" between.😮
... that code makes no sense, wouldn't you want to prevent a accidental fall down the stairs by installing a door?😂
Idk i like it when my top and bottom rails line up.. the total shortness aswell as the short balusters are messing with my eyes, its not pleasant in my opinion.
Better if it was level with the top part.
When tu said 4", I thought 3" that ,7 I had to learn from experience, tu like my US Navy Sea Bee playlist for Enlistedman and Officers who are motivated to rank up on ytb videos by CIA O29 US Navy Seal Devgru 6 SWCC Officer O19 Kaiser Tsar Matthew Floyd Marston Romanov Windsor 2 Rothschild Rockefeller Cartier 2
Muita conversa
ffs three and eleven sixteenths! Just go metric will ya?!!!!
Ew.
Screws, no way bro.... its ugly try some better joinery. 😢