Video není dostupné.
Omlouváme se.
Upgrades, Updates & A Fail on Woody's Crown Wagon - The Skid Factory
Vložit
- čas přidán 6. 06. 2022
- Today on The Crown Factory, Woody's Wagon is in the Shed to replace the Radiator with an EBay MA70 Supra Alloy unit along with fitting a GFB Boost Gauge to confirm that the SuperCharger is actually working.
We also attempted to install some Disc Brakes to the rear but it ended up being a bit of a fail due to Al's past antics with his 2JZ Crown....
bit.ly/3tfT2LV
Yes, they're Cheap but they WORK! Who doesn't like saving some $$$
Have a browse here: bit.ly/3tfT2LV
Get a Shed flag that doubles as a (Small) table cloth here: www.theskidfactory.com
Write your name in the Credits! / theskidfactory
A like & A Share goes a long way! If you like the show then your friends will too!
Follow The Skid Factory for more content:
woodrigos?...
theskidfact...
/ theskidfactory
turboyodats...
/ theturboyoda
Please note: We're just a couple of Mates hanging out in the shed, There's no big production company's, fancy cameras or Scripts, We love what we do and try our best to create quality content for you to enjoy every week. Sometimes that includes a steering rack conversion, Other times it's as simple as bolting on some wheels to our daily drivers. Don't forget that working on cars isn't easy and can be dangerous. Use Ya Brain and take the necessary safety precautions whenever you're modifying your car. Consume Lemon Squash responsibly & Thanks for watching. #JDM #CROWN #1GGZE
Have a browse here: bit.ly/3tfT2LV
Yes, they're Cheap but they WORK! Who doesn't like saving some $$$
1 Length of timber from Bunnings
Does a surfboard fit
Pub run with as many people as possible
When are you putting the OM606 in it?
try a davies craig electric water pump
eBay has been surprisingly useful for me after not really using it much for 10 years. used to buy motorbike bits on there all the time... just installed a cheap ebay radiator in my car (206) after a plastic crack started while driving back from the GC. and yeah, those clips are annoying with pliers. forgot about the multigrips sitting in the toolbox. kept the same crappy hose though...
5psi worth of skids... in comfort. Nice one Woodrigos
Hello absolute legends. Can you guys do something together again? Last time was an absolute blast! :D
Headroom challenge, which Crown can you wear the tallest Crown in. 👑
Aww, posted mine before seeing this!
"Smooth, comfortable, reliable...those are just words" - Turbo Yoda 2022.
That mango tree has been quite productive for old JDM Toyotas if I remember correctly you found the MR2 under it as well.
I also found a nice 4.5M tinny under it too!
@@theskidfactory Geez, I think I'm gonna have to plant a mango tree
When you're trying to get stuck brake pistons out of the calliper, just put a bolt in the hole where the flex line went en put a grease gun on the bleed nipple. Way easier and works every time.
Putting wood in the calliper as pads whilst still attached to the hub works a treat aswell.
Is even easier when not flopping about on a table.
Challenge: Find the tightest, most rediculous Mcdonalds drive through and whoever can make it through without curbing a wheel.
Knowing these boys, it'd be KFC...
Kedron KFC's drive through is a piece of garbage, I vote that.
The loser has to eat the Maccas food. ( the thought is enough to make anyone sick )
Nambour maccas.. has it hands down on the coast
Test how quick you both can put the back seats flat 👍
There's only one challenge with wagons to see which is best..
The ease of which you can grab a can from the eski in the boot and pass them to each passenger without taking ya belt off..
i 2nd this
Enjoy the GFB Boost Gauge guys!!
It looks mint 👌
Love the content just seeing you guys having fun.
Essential comparisons must be:
- Who has the longest (exhaust) pipe
- Who has the most rubbage due to excessive lows
- Whose engine bay has the biggest opportunities for losing 10mm into the abyss
You can have any car shape you like as long as it's a wagon.
- _Henry_ _Ford_ _probably_
Not so. Ford made many body shapes, but all on the one shassey. Black only of course.
Skid Factory: All Crowns all the time 👍
You should drive around with Roger in the back of both cars and see which one makes him barf first.
Park up the crowns on Hastings street and get random people to pick their favourite.😂
Used to buy 1GGE's for $195. When 3TGTE's were $595 delivered. Ahh they were the days... (Weekly wages were around $250 and fuel was 62c!)
Which wagon is the best to sleep in after a day on the lemon squashes?
You can't beat all the velour in Woody's. Nothing brings comfort like velour fully soaked in decades of ass sweat and farts
Lol , I'm a fancy pants patrol cat . Had the patrol(Armada) a year before giving it the proper test drive .
Cool wagon guys - I hope no barra on this cool old rig.
Roger is looking like a handsome young lad!
LONG ROOF CAMPING SPECIAL!!!!!!!!!! Be the best 4WD show on the internet and take the crowns camping.
The medieval axle removal attempt...... gold absolute gold...... if it was successful it would have been epic.
I love these comedy skit intros. They're friggin hilarious.
edit: Speaking of which, seeing the differences between the two cars - Who can fit more bogans in their longroof ?
Take a drink every time Al says barra.
Love seeing a classic back on the road, great work lads.
I am just so happy to see some wagon love. Save the wagons!
3:33 if you put a little bit of petroleum jelly on the inside of the clip before installing it, it never sticks, it's always easy to remove, and it also keeps the rubber a bit protected from the metal. I've been using this trick for a decade now and it's never failed me. Not my idea, shop teacher i used to know learned me.
lol, i feel like we hear hundreds of these clever little hacks, but forget nearly all of them..
🎵 there ain't nothing like a Crown, for boostin it up, an layin rubber down 🎶
Those crowns deserve a cross country roadtrip. Sleep in it, bring the grommet, camp on the roadside, tell jokes around a campfire..
I love your slow and warm videos, when you just repairing, modding cars and having fun messing with cars)
Are water pumps available for barra's? Timing chains?
also... will that fit on a honda?
On the contrary - I'd say watching you guys work on your own cars is the best content! And would love to see more of it, you're able to take a few more liberties and when you've got a vested interest in the projects.... It's a good different 😁 loving the direction you guys are taking the channel and how good the production is getting!! Keep up the good work gents 👌
I couldn't think of any witty challenges, but I can now head over and see what, challenges you came up with 😁
I enjoy this style of car modding. Affordable, fun and different. Everyone trying to get maaad views ends up becoming something totally different than when they started. You two are a refreshing pair of 'regular' car guys
Hey woody, Lexus is200 1gfe vvti water pump should fit onto your 1ggze. Also I've got a bunch of 1GGTE Parts that fit on your gze if you need any.
It will fit a GTE timing case but not the GZE unit unfortunately.
Killer info!! props!!
I fitted an IS200 water pump to my mate's GZ20 Soarer, I had to grind the housing a little to fit under the timing cover but it fit well. From memory there were 2 different IS200 water pumps and they look completely different to each other.
Good work 👍
Did you try Toyota dealer in aus for the hoses and pipe,
I'd seriously try them
You'd be surprised what you can still buy new from dealers 😁
Plus most times can be cheaper than aftermarket
Plus you know it will fit correctly
Edit, try Toyota Dealer for your cambelt and water pump etc
Why you not buy an Aussie made radiator ?
Those eBay radiators are cheap for a reason 🙃
I really enjoyed the editing of this video, good job Woody.
Nicely done
I love those opening skits, I mean skids.
Best intro yet, family loved it. Keep it up boys
Usually a bit messy, but I screw a grease nipple into the callipers and push the pistons out with the grease gun. Works 100%
Looking at woody on the end of that sledge, they must call him lightning!
Buddy of mine made an adapter plate that bolts into that style of axle to use a port-a-power to push stuck axles out, granted you have to be able to get one side out to use it, worked a treat for doing wheel bearings on the old Hilux axles.
I like the ITBs on the KTM , in the closing sequence, while busting concrete , chain gang style.
I had a 1GGEU in a Celica XX GA61, it was a great motor, revved to the moon and sounded amazing. I ran it low on oil and the head seized up.. I ended up putting a 1GGTE in it. The car is up in QLD now as far as I know, it was two tone silver.
Having had several wagons and 5 kids, the first test is to put a pram in and see how much luggage can still fit in. Second is reverse parallel parking, lastly how long the battery lasts when the kids turn on the rear reading lights and you don't notice.
Greatest intro of 2022
hey a dude working at a subaru dealership here :) to get the caliper to free up I usualy take a pipe wrench and put it on the end and turn it around while bushing on it with a long bar :) ofcors it dosent always work without warping the piston :)
Grease press is really good for getting pistons out from calipers, bit messy but very effective
Don't worry. Taking apart submersible stormwater pumps with a forklift and a sledgehammer is an accepted method of operations as well.
Intro: GOLD!
Best show yet. Reckon it's the cruzzier vib. Or smokin better lemon squash.
Nice one boys
Good content!
Good that woody doesn't pee on the floor! Bit green though, may want to get that checked out.
i have that pat catalogue got it at home, flogged it from work, biggest help ever, although i work at autobarn and not SCA, my mortal enemies...
Hey guys, if you can’t get a water pump, maybe a Davies Craig electric pump. Then manufacture an aluminium blanking plate with an welded on inlet tube. Good lathe and mill project
The intro was 🔥
bit.ly/3tfT2LV
a simple way to pop the pistons is with a grease gun. Just remove the push on tip, the thread on the hose will then fit most calipers and with an adapter if not. Used mine yesterday to pop out two from a 40 year old Suzuki.
Content is mint boys...
You could free up that axle if you just soaked the whole hub in the rust remover. Just let it sit for like a week. Should come right out. If not, you can drill an access hole in the axle tube, and pour in some of the rust remover. Attack from both sides.
Assuming it had twisted the splines within the spider gear
@@theskidfactory Had one of those once. Got a bit of old bar that was smaller than the inside of the spines, fed it though the other side of the axle, and used a hydraulic gear puller to press against the axle though the diff. Cracked the welds clean off the pumpkin and pulled the axle tube out.
Ended up cutting the guts out of the diff with a angle grinder. The real kicker, after cleaning up the welds, the tube when back in, and nothing was out of wack. Didn't even bend the flange with the puller.
Old boss once told me, use a grease gun to remove caliper pistons, even with stuffed seals or ceased pistons it works a treat 👌🏻 uses a bit of grease but doesnt damage anything
I just love these old JDM cars. In the US you can legally own a JDM if it's over 25 years old. But they are not cheap. And sourcing parts is Really hard. Or impossible without spending a fortune. .I've never been fortunate enough to see a Crown in the US. But my day will come. 🤘🥃😁👍
Another thing you can do for old calipers is use a grease fitting and grease gun, they run a heeeap of pressure and due to the thick grease dont explode in a biolent manner when they let go 👌
That's a hell of a "Lady's Key Chain" you've got going there Woody :) All you need is a scruntchy, a spiral phone cord wrist lariat and some little stuffed Teddy Bear and you'll be complete!
Haha, just joshin'. Thanks as always for the great content and best to you, Al and Roger!
Cheers, Sev
As a child , my family owned at least two station wagons . I was always the runt stuck in the very back seats of the no A.C. wagon. If i never ride in a station wagon again , it will be too soon . It made me very bitter . Lol
Beautiful pooch
The light means the clutch on the SC is engaged. Look for a smaller balancer, you'll get 14psi out of it easy, I got over 17 in my AW11 with a sc14 from a Previa
Love the old wagons. I agree with Al, put a Barra in it!
You should transplant a 1GFE Beams (Altezza/IS200) then use the rods and pistons from this supercharged engine in it, then turbo on top. aswell as the 6 speed gearbox to make it manual (the is200 sport has a torsen lsd and much better gearratio by factory) It would be supergood, not expensive at all, and alot of fun to watch and follow as a project.
More crown content !!! ❤️
watching you guys play with crowns makes me miss my jzx110. .... then i started looking. maybe 2012 Athlete....I wanna see if the Hybrid v6 is any good tho.
Wagon test idea 7: How many people can squeeze into each one. As in, literally, like a clown car.
Seen 14ppl fit in a sigma wagon. Guessing maybe 20 in a crown?
@@unusualelectronic Depends on the size of the people.
@@unusualelectronic Like a beautiful sunset. Like a beautiful woman walking towards you. Like a moment in a forest between you and a bear that chooses not to eat you and walks on by. That Sigma, those people. You’ve seen things man. You’ve seen things.
I'm down in Victoria and have one of these wagons. 1988 model. GS130G-AWPQR.
Cool intro!
The open and closing speed of the windows
1uzfe fits straight in
...I had an 89 crown factory 1uzfe
I wish my stagea could be in on that wagon test.
Definitely need to do the big boy test how many big boys can you fit in the wagz
I have used metric grease nipples on them with wood between pistons until you get them all moving don’t put your fingers in there ,pinched mine using air once that hurt enough 🤙
Yeah came here to suggest using grease gun on the caliper
Barra!
Barra!!
Barra!!!
It has been great to see you guy's show and work on your own cars. Also Woody gets a participation award for the "skid"
Best car air freshener
Another way to get stuck pistons out and probably more accessible to most. Is putting a grease nipple in the brake line hole then using a grease gun to push them out.
Good to see you guys at all asian day. Was gonna say hi but didn't wanna be all fan boy and bother you guys
a road trip vid would be nice on both crowns
Lexus is200 with the 1gfe does 10-12l/100 I've found, great motor but you need to rev it to get anywhere.
RIP Alan's lathe chuck.
Easier to free the pistons by using a grease nipple either directly into the caliper or in a driilled out bolt with a compatible thread, to either the hole for the banjo bolt or the (usually easier) the hole where the calpier bleeds.
Challenge: it’s a 7 seater right? Get 7 blokes in there & see what it’s like on a decent road trip/ Saturday night cruise!!
You do realise they call that the 'Dickie' seat! Let us know with a written warning if the pommie sitcom music is coming on and is that officially the theme used when a comedy routine is coming? Good of you to put in the effort for us all anyway.
So I've got a Supra in my work with that exact same radiator in it.... it's got a built 2j, thousands of dollars worth of HKS turbo, a big fuel system with a shot of nitrous........ and a $110 fleaBay radiator.
crown vs crown i want to see:
wheelbase comparison
which is longer for sleeping in the back of?
which is comfier for Al and Woody to spoon in side by side?
which is easier to remove back seats?
Woodys crown gets a barra
Which crown can hold the most stuff out of Gus' bedroom including bed side table, desk, computer, clothes and bed in pieces?
also Woodys crown gets a barra
I'd make sure you earth that rad. Stainless, cast-iron, aluminum good recipe for electrolysis in the coolant to eat a weak spot in the radiator.
Ebay radiators make so much more sense than some expensive like PWR types, particularity on street cars, that only get given odd hits.
Shed skids!
I have to agree with the pain of owning an old school car. My vortex shares lots of drive train stuff but you try and get a non cracked dash 😂👍
Do you have a podcast at all? Could listen to you two chat shit all day. Especially after a couple of lemon squashes
I work with dad and this reminds me of working with dad 😂😂”dnt worry moi8 I’m superior I’ll sort this out”
Double Island Point trip I reckon.
Woody's face at the end when he hit's al's concrete LOL
Whoops 😅
1. School Bus: Load the wagons up with the grommets eating their coco pops and see whose gets the fewest spills.
2. Taxi: The kids need a ride to a party. Who can deliver 10 kids the quickest?
Please check out the part number GWT-70A for the water pump. That part number does not include a pulley. This pump should fit a 1g-gze. genuine part number was 16100-79055 which is no longer available. Hope this helps.