Aren't the gears inside the hub greased from factory? They look absolutely dry. My new SG-C6001-8D is shifting perfectly but makes very unpleasant noises. Especially in gear 7 and 8. Merci pour la vidéo :)
@@restoralfinenexus Bonjour :) From day one, the Inter-8 hub makes a fast and inconsitent metallic rattling noise in gear 7 & 8, only under load. It sounds like some metal parts, which are vibrating faster and slower. You can feel the vibration in the pedals slightly. It feels a little bit rough, compared to the other gears. When you start riding, it's almost silent. After 1-2 km it gets louder and louder. You almost can't hear it on bad roads, due to other noises. But on smooth roads it's very noticeable. The other gears are silent and smooth. 3th runs a litte bit rough too, but it's silent. The hand shifter is aligned(yellow marks). I tried to twist the shifter slightly, while the vibration ratteling apperas, to see if it's shifter related. But it's not. I recorded the sound, but it's not accurate and you can't hear it due to heavy wind noise. I'm a bit disappointed, to be honest. I have a very rusty bike with an old Sachs Spectro P5. This hub has seen some distance and runs absolutely smooth, compared to the Inter-8. My girlfriend and me bought two new bikes with Shimano Inter-8. Her hub is silent, it only vibrates more in gear 3 than the other gears. I don't know if it's normal for those Shimano hubs, or could be solved by proper relubication? Merci pour votre temps.
courage
Voilà des vidéos de qualité top
Merci pour votre réponse
Vraiment c'est du lourd
Merci pour le compte-rendu
Top
Ok
Vidéo de très bonne qualité Merci ❤
Il faudrait faire ce démontage/nettoyage/graissage tout les combien de kms parcourus ?
Bonjour tout dépend de la manière que vous l'utiliser.
Hey French guy ! Did you get it back toghter, the part with them cog wheels?
Bonjour je n'ai pas compris votre question ❓️
@@restoralfinenexus
Bonjour, never mind....my friend helped me
Aren't the gears inside the hub greased from factory?
They look absolutely dry.
My new SG-C6001-8D is shifting perfectly but makes very unpleasant noises.
Especially in gear 7 and 8.
Merci pour la vidéo :)
Bonjour vous pouvez me décrire plus précisément les bruits désagréables ?
@@restoralfinenexus Bonjour :) From day one, the Inter-8 hub makes a fast and inconsitent metallic rattling noise in gear 7 & 8, only under load. It sounds like some metal parts, which are vibrating faster and slower. You can feel the vibration in the pedals slightly. It feels a little bit rough, compared to the other gears. When you start riding, it's almost silent. After 1-2 km it gets louder and louder. You almost can't hear it on bad roads, due to other noises. But on smooth roads it's very noticeable. The other gears are silent and smooth. 3th runs a litte bit rough too, but it's silent. The hand shifter is aligned(yellow marks). I tried to twist the shifter slightly, while the vibration ratteling apperas, to see if it's shifter related. But it's not. I recorded the sound, but it's not accurate and you can't hear it due to heavy wind noise. I'm a bit disappointed, to be honest. I have a very rusty bike with an old Sachs Spectro P5. This hub has seen some distance and runs absolutely smooth, compared to the Inter-8. My girlfriend and me bought two new bikes with Shimano Inter-8. Her hub is silent, it only vibrates more in gear 3 than the other gears. I don't know if it's normal for those Shimano hubs, or could be solved by proper relubication? Merci pour votre temps.
A éviter vu qu'ils ont mis du plastoc dedans..
Oui mais il n'y a pas le choix c'est pourquoi il faut le graissage régulièrement.
@@restoralfinenexus on peut tjs acheter le modele précédent en occasion si ils le vendent plus en neuf
@@housemasterjkm6332 oui
Je suis impressionné la technicité pour arriver à démonter puis remonter cette pièce
Merci
courage