1965 Datsun 320, Will It Run After 30 Years? | Turnin Rust
Vložit
- čas přidán 18. 04. 2024
- Join in with the Turnin Rust crew as we flash back into this forgotten 1965 Datsun 320. After sitting abandoned for over 30 years, the team jumps through the obstacles in hopes to see this ol' girl running under her own power for the first time in over 3 decades. Will it run or is this just a cool piece of yard art?
Shout Out To @Maxxdtrailersofficial for Sponsoring Us With Our Drop N Load Trailer!
Check them out here: maxxdtrailers.com/drop-n-load...
►Subscribe HERE: czcams.com/users/turninrust?su...
►Subscribe to Our RESTORED Channel As Well: / restored-hope
►NEW MERCH AVAILABLE: www.be-restored.com
►Become a Turnin Rust Member: / @turninrust
►►Any business enquires can be sent to: kravenedkustoms@live.com
** Like To Send Us Mail?
Lance & Wyatt Bush
P.O Box 865, Bogata Tx, 75417
#datsun #abandoned #restoration - Auta a dopravní prostředky
Puddin isn't going to be happy when he sees he missed one in his backyard. Seems strange to not see you guys trying to free one up in from the start.
Thinking the same thing
How did the dat-sun king miss that thing?
no kidding like what 25 miles or so from okc in shawnee area
He's got enough work to do on the projects he's got.
Damn Puddin would love it. He did just get an old rare Toyota stout from Mortske
I remember these trucks when I was little in rural Kyoto. They were amazingly popular both on the farms and in the urban sections. There weren't "caps" or bungee cords" at that time so stake bodies or tarps were the big thing to contain the loads which is why they have those hooks around the bodies for easy use. In my childhood memories, I can see them piled high with all sorts of goods moving about. Because of Japan's tiny alleys, these were the "bigger" delivery vehicles of their day with the even smaller 3-wheel Bata bata taking up the slack.
I wish you guys would use a muffin tin when you do this. You guys are always pulling these vehicles apart and putting things down all over and it drives me crazy.
Haven't seen those since I was little driving around here. It didn't seem like it was going to be too hard to make her a runner again guys. Very awesome work of the Lord there guys.
Now someone can say, these JDM’s guys sure make a reliable vehicle. That’s ok I’ll say for ya’ll.. once again another great truck story! Thanks again TR… love it!!
Love the look of that truck.
That truck is extremely rare. It's definitely a collectors item. I hope that you do a full restoration on it.😊
The Bush family have revived another one. which is always a pleasure to watch. Stay blessed guys.
I had that same engine in a car. Small but mighty. That thing topped at 105 mph and easy to work on. That "old" looking box was the same style used up into the 70s.
Starting handle...welcome to the UK in the 50's and 60's!! Nice old truck. Great filming again Christian well done.👍
Haven’t seen this yet but what a beauty. I have to go to shop for few beers and then sit down for this.
Here I go again with a prayer request from my favorite prayer warriors. My sister, Kathy has blood cancer, and her treatments are no longer working. Please pray for her to be released from this fear, or for God to perform a miracle and to give her an extension of life. MamaCard thanks you for always being present with prayers.
Love watching you and your dad work together it's very special. Keep up the awesome work. Thanks guys.
I have been looking for you od those Datsun for years... can't wait to see the show.
Sensational! Loved this episode. Dad with the wire brush in the dizzy cap is gold. Takes me back to Morris Minor days.
Hello and Hey to All the Fine Folks in Texas from the state of Maine !!!
There was one of these a 1963 in Sherman,TX i saw . My Dad drove a Datsun to the shipyard for years, i learned how to drive in one of them, wish i had it. I know yall will do it right great folks!!
I Love off the wall stuff and you fellas found a gem here Thanks for the Awesome Show!!!!!
You guys are amazing God has given you guys gift to fix things. God bless you guys and love you.
It just wanted you to help it live again! Way to go.😁👍👍
Just can't thank you and the family for All the joy and inspiration you all share with us. Keep it up and GOD Bless.
Love when you get these old trucks running. God bless the entire Bush Family.
I Haven't Seen That Era Datsun Pickup Truck Ever Before Amazing U Lance & Ur Father Got It Running Again
Great to see family working with one another on progress and keeping another vehicle from the crusher ,❤LoveJim J&R mobile service and God Bless Y'all and your critters
Haa ..Fist thing I thought Puddin is having a fit seeing this truck. Rare rare rare ..Too cool.
Thanks for blessing us with another great video
Thought this would be the best way to connect with the owner of this channel as there is a person unloading your old videos on there own page and getting subscribers with it. You guys do an amazing job and it's so nice to see god's work at it's finest bless you all and keep up the amazing work.
I'm very surprised that Puddin fab shop didn't pick this truck. He is King of Datsun
Puddin is going to be jealous....😂
Turnin Rust was the very first channel I ever subscribed to. Loved the strong faith foundation your videos had from the beginning.
I finally plucked up the courage to start my own channel...
I've been a Datsun fan since the early 90s. I've had 3 zs, 3 510, a roadster, 620, 720, 200sx. I love the fact that they are popular again. Suck, squeeze, bang, and she'll blow! Get it cleaned up, repair the rust, put it on a more modern frame, drop it. Cool little shop truck. Datsun/Nissan knew exactly what they were doing.
Nice this one has vocals! 👀 il watch
This was awesome can't believe that carb just worked like that, the car just wanted to live and thanks to you it is going to, keep up the good work love from England x
Loved your video boys and another great production by Christen
When fueling any Datsun pre 1990, never use any Ethanol petrol, as that destroys the fuel pump and carbi parts, found this out on my wifes 1975 Datsun 180B. Crank handles welcome to my world, Massey Ferguson 1958 petrol 35 and my 30hp 3 cylinder diesel chinese tractors.
Keep up the good work and God bless
My Friend in High school, Tucson, 1977, had the same truck, red and all. We worked on it some and he kept it emmaculate. We did a lot of miles in it and lots of stories! I was so Happy to see you get this truck and get it running! The sound alone brough back many happy times. Oh, and the fender mirrors are the stock ones.
This is a neat old rare truck… My first brand new truck was a 1985 Nissan/Datsun and I thought it was a very good truck and loved it. I did have to get rid of it cuz I was saving up for a house. AnyWho, I like that you guys, get off the beaten path with what you fix up Chevys and Fords are great but stuff like this is the kind of thing you don’t see anymore keep up the good work!
Excellent video Turnin Rust :) Wyatt :) , Lance :) , Christina :) I remember those trucks my one uncle drove them for years and fun small trucks work on !
I love this little truck.
Back in the early '70s my brother had a Datsun, it was an orange four-door little car. We lived about 50 miles from the beach and he was a surfer. There were lots of surfer guys in our neighborhood and I remember many days with six people in this car driving that distance to the beach. We didn't always have six people but that car drove for years and years and we drove back and forth to the beach more times than I can remember. I remember when he saw that he hated to see it go but he needed something bigger and it still drove just as good as the day he got it. Good old time :-)
Great video guys. Well done. Enjoyed watching. 👍🏼👍🏼
Thanks guys. Love the video. God is so good to us all. Keep'em coming
This was awesome! I love the hand crank start👍👍👍
What a great little truck!
Great job and another great video guys 👍👍
What a cool-looking old truck.
Here some pointer to help you all in the future, when dealing with older ignition system.
A: Those canister type ignition coils dont like being mounted on there side and will leak out all there oil, damaging coil in the end.
B: Those type coil are marked for use with a resistor for the points ones or for use with electronic ignition where the resistor is not used. For the resitor type, a ballast resistor must be used to drop the voltage to prevent overheating the coil or putting undue arc across the points. When converting to electronic ignition, the ballast resistor gets removed from the loop to give full voltage to the coil.
C: Its not good on the coil, for it to be making large arcs and puts extra stress on the coil. Its better to use a dwell meter, to check the points for function with the hole ignition system hooked up. Leaving the plugs resting on grounded metal is fine when not wanting to start the engine, since limits the distance the spark has to jump to ground. A fluke 78 or 88 is a example of a usefull meter that comes with the dwell option.
Love this and like to hear them talking. I see the mute videos but not so great
That crank is pretty cool
I don't recall ever seeing your Mamma! Would like to see and hear more from her. I bet she has some juicy stories to tell about y'all 😜 great truck! I haven't seen one of those in years!
Me too🙂
It'll be neat to see what you guys do with this truck in the next episode!
I had a Datsun 120y back in the 80s in England. Great little car with the tucked in wheels 😁
Better watch out having that Datsun puddins fab shop would love to have that
Had a 64 Datsun when I was a teenager, it had a 4 speed on the column. It was built like a tank.
This one was a awesome video!
1965 when my dad was born. This video should be interesting, can't wait to watch!
Enjoy watching y’all videos.may God Bless this channel. WWG1WGA
I knew a Ol boy that had one of these waaayy back in the day, he drove the bag off of it too, he junked out of it and everything, something would break on it and he’d fix it and keep on going! Yeah the outside of the bed was about rusted off of his too! Oh yeah he pulled a little Ol trailer behind his too! Them old Datsuns, like the Toyota’s you couldn’t hardly beat them.
I owned one of these probably late 70's, and probably paid a couple of hundred bucks for it at the time. Was just thinking that it's one I wish I still had. Fun little truck!
Awesome little truck. I really like it
little paint and body work and she would be a super going to town rig. Nice job and loyal truck for sure.
You got a datson out of Oklahoma before the Datson king old puddin got it it lol
I remember a few of these trucks running around Canada..Just very basic dependable machines!..Way to go TR!
Glad i checked in. I didnt get a notification.
Great video, guys.
glad your talking on this on the last one i tried to watch no talk i found something else towatch puddens fab came threw
I agree. When they do the no talking videos I find something else to watch as well.. so do some friends of mine who watch them.
I look every day for a new video from yall. Love the content and the clean family team.
Brings back memories of my first car a 1970 Datsun 510. I think the Datsun B210 had that little 1200 in it also. Good to see the old truck running and saved from the shredder.
As always, ENJOYED!
I've worked on Datsun and Nissan vehicles for years...
Finding an old PL320 pickup that hasn't been completely devoured by the "tin worms" is highly unusual. And it appears that the windshield is near perfect too. Amazing find guys.
@PuddinsFabShop What do you think about this little minitruck?
you cant @ mention your friends on youtube lol
Found yourself a very nice runner. Hope you can get the hydraulics fixed so you have both clutch and brakes. I remember them from my 2 years on Guam, fun little trucks
Would of loved seeing you and dad both inside that truck, looked little tight in there. Neat little truck, great videos as always.
Nice Video . Thank you .
Austin engine, Datsun bought the Austin British Motor company old 1200cc moulds and tool factory machinery for this Datsun's engine. I had a Datsun saloon version in New Zealand and was able to put my 1950's Austin A40 Devon 1200 engine head straight onto the Datsun 1200 block. Datsun cast the motor with a much better metal makeup whereby the cylinder bore never wore out. Even the distributer is from Austin. Great reliable vehicle!! Cheers Daniel
Lance what an awesome truck 🚚 beautiful. Thank you God Bless
For future reference, if it’s sparking at the coil , the points are working just fine , you can’t get one without the other 👍🏻
I'd like to see more on this old beaut!
My first car was a 1966 Datsun 1200 pickup. Easy to work on and very dependable. I got it when I was 16 and had it until I was 19. Great first car. It was 1972 when I got it.
Привет ребята. Наконец-то новое видео. Прекрасно сработано! Отлично! Продолжайте! Жду новые видео
Thanks for another , Brother !
Good job yall keep up the good work.
PD Blaster is made just 30 min from me. A buddy of my used to work there said he can get a can or two for free any time he wanted one. Love that stuff. saved me plenty of times.
Nice work! ❤️😎
Brave man using the hand crank!
These were fantastically good trucks
Thank y’all for more great content. God bless
OH, MY, GOODNESS! I LOVE IT! 😍🥰 Oh Please fix her back up again..
Sweet find
Great video guys
Sweet little truck.
what an awesome little truck.
This is a rare car!
Great little truck
Now I know why American always make a big car. I could see Lance could barely move his body in the cab. Anyway, I'm happy to see that little old lady can run on her own power. Nice work guys. Love from Jakarta.
Thanks!
THANK YOU SO MUCH AUSTIN for the donation!!! God bless you!
thank you for talking through this post, I didn't like the ones you didn't talk in,sorry but I had to check out on them
I worked at a dealership in the 70s and we'd see one of these from time to time. For some reason most of the mechanical parts were available well into the 80s. Clutch master and slave cyls were a very common replacement item. Frozen wheel cyls were also a thing on just about every brake job.
A very nice looking truck 👍👍
Nice job!!
Great job! Now to fix all the jury rigs! Neat little truck! I know where there’s a Toyota of about the same year that’s for sale! But I’m sure the guy wants to much for it.
You can put several hundred thousand miles on those Datsun's from the 60's. Our neighbor in Colorado had one and it had well over 300,000 miles on it and ran very well.