Making a Mini Fog Machine for props and Cosplays
Vložit
- čas přidán 1. 05. 2023
- How to make a mini fog machine
In today's episode, I show how I made a mini fog machine that I can connect to each other and add to future props and cosplays! I hope this cosplay tutorial is helpful.
Please share this video with anyone you think will find it interesting!!
I really hope to be able to continue doing this in the future, and thank you guys so much for watching!
FOLLOW
• Instagram | / anatomiccosplay
• TikTok | / anatomiccosplay
• My Etsy Store | www.etsy.com/shop/AnatomicCos...
• Thingiverse (3D models I've made) | www.thingiverse.com/anatomicc...
LINKS TO ITEMS I USED:
• Atomizer (U.S Only/Must be 18yrs old to order): aspirevape.com/aspire-nautilu...
• Fog Juice: amzn.to/3Hz5JbH
• Air Pump: amzn.to/42gL0RP
• Parallel Cable: amzn.to/44pxFJ4
• Wire Strippers: amzn.to/44dXXh4
• Butane Soldering Iron Kit: amzn.to/3nsa89p
• Hot Glue Gun: amzn.to/3Nx79Ye
• Hot Glue: amzn.to/3LLgsCu
• Hose: amzn.to/41UlYsb
• Dremel: amzn.to/3LsvDyP
• Heat Shrink: amzn.to/3Lu5Nui
• Connectors: amzn.to/42260Mv
• Batteries: amzn.to/44nW7ug
• Helping Hands: amzn.to/3p0vewe
• Rocker Switch: amzn.to/3Nzyb0T
• Sliding Switch: amzn.to/42hHqag
• Button Switch: amzn.to/3oW6ULT - Jak na to + styl
Because it's polished stainless steel. You're better off drilling into it for a small grounding screw.
I about died when the hot glue came out. 🤣
So a few reasons you're having trouble soldering to that surface:
- It's a huge piece of metal so you're just creating what's called a cold solder joint, you need something to transfer heat a lot more efficiently to that surface to solder to it. I'd suggest using solder paste or flux to help with heat transfer.
- The surface is very smooth, try scratching it up some.
- Your solder tip doesn't look very well tined which will degrade the heat transfer.
- Look into a better solder 63/37 tin/lead is the best ratio solder it has a near zero "plastic" point, which is the point where it's still a liquid after you remove the heat before it cools.
- Also make sure you're cleaning your solder, and what you're going to be soldering with 97% or higher isopropyl alcohol first. You'd be surprised how dirty solder is.
Anyhow, you mentioned if we had any tips about soldering, those are the ones I'd start with.
Try acid flux instead of rosin flux. You need a flux so it can stick.
A tip for instantly cooling something down, take a can of compressed air, hold it upside down and it will instantly solidify hot glue, haven’t tried it on solder yet but it should work. Make sure not to get yourself it can burn you because it’s so cold.
Just had to say I’m really glad I found this video. Though I won’t be using this for props, I wanted to make a very portable automotive smoke machine to find vacuum leaks without paying hundreds of dollars for brand name ones having them draw power from the onboard battery or having to connect to air compressors with regulators and what not. So this video was really helpful for a different approach. Thank you. 🤙🏻
Your soldering problem comes from «excipient» (i don’t know the right word in english…) a chimical product on the surface who prevent for dirt to incrust in the wire.
If you want all part stik, you have to put at a hot temperature (the same for all three part, very hot) together at the same time: the base, the wire, and soldering wire.
Thank you!
I love this chanel, this man is like a Senku but for cosplays hahahaha great video man.
Better with a 5 second timer switch so it only runs for a short period of time as it might burn out the coil
were did you find the other vape atmotizer the small one
05:31 scrape the surface and use the flux.
Your solder doesn’t “stick” is due to the fact that you are soldering to what looks like aluminum. You can try scratching up the part, then take some patroleum jelly put on that spot, then heat it up with your soldering iron.
Thank you! I didn’t know about the petroleum jelly
what's the p.j. do?
😊😊😊👍👍👍👏👏👏 molto utile grazie per il video
Hi!!! How do charge the batteries after?
Can you use them with your Dark Deku cosplay??
i was thinking the same, with purple
hii, cosplayer here... is there a way to make the smoke COLORED? should i mix the liquid with some type of coloring??
There is no way to colour fog juice directly. Anything you mix runs the risk of clogging the machine. Even in professional theatres, film sets, etc. The smoke, fog, haze is always white. If you have LEDs close to where your smoke comes out, then it might lend a tone of colour to the smoke, but in general it's just white.
You can't solder stainless steel
i learned: when anything doesn`t stick together correctly, put hotglue *over* it 😂
Switch is 1 and 0. Not O and I. 0 and 1 are binary for off (0) and on (1).
You can use it for smokescreen for dark deku
Hello, I need help, you see, I don't speak English and I don't understand it, I'm literally using Google translate, I would like to know how you made the Dark Deku cape but I don't understand the steps and I don't understand it at first glance, if you could explain it to me here in the comments so I can translate it, it would be very useful, Thank you
Vape premium
no flux
Electronists are cringing at that solder job
No doubt here
They may be.... they may be.... but, "Electronists"? I think there's more than Electronists that "are cringing"....