I’m a retired PPG Automotive Refinish National Trainer. I’ve also worked for BASF and DuPont. I’ve been a round! You use the same techniques I’ve been using for years. The blend almost always comes out really nice. Keep it up!
I do my sealer blend the same.. sometimes I use fade out thinner on the edges to make them super smooth. Love the base blend technique! Gonna try that soon. Job came out awesome, thanks for sharing Kandy man 👊🏽
I usually use a hot temp reducer (straight, 85-95 temp) and lightly wet in the sealer edge. Works very well as long as you don’t over wet it and run. Don’t ask me how I know👀👍
Much thanks and appreciation I've been spraying sideways since I saw you doing this! By the way 9 minutes in you mention sky pads what exactly are those??
@@kandyman5315 came out really good. I use sikkens colorbbuild plus for sealer I never used to melt in my sealer because I didn't even jnownit was a thing. But had issues with halos from.the edge of sealer sometimes on tough colors... I wish I would of thought to sand it with 2000 before base lol... looks like it worked great I may have to give it a try.
@@PaintSociety I use sra because I spray lesonal water. Not sure if it would be om to use the sb clear base to melt in then put water over that? I mean I guess it should be fine eh?
That blend came out nice. Silver blends are every painter's nightmare. Lol
That's the truth. Thanks again for watching.
Not when you learn how to fix it l
I’m a retired PPG Automotive Refinish National Trainer. I’ve also worked for BASF and DuPont. I’ve been a round! You use the same techniques I’ve been using for years. The blend almost always comes out really nice. Keep it up!
Thank you 👊
Great job kandy man I couldn’t have explained it any better you are the man Right on point!!!!!!
💪👍💯
I do my sealer blend the same.. sometimes I use fade out thinner on the edges to make them super smooth. Love the base blend technique! Gonna try that soon. Job came out awesome, thanks for sharing Kandy man 👊🏽
👍👊💯
I usually use a hot temp reducer (straight, 85-95 temp) and lightly wet in the sealer edge. Works very well as long as you don’t over wet it and run. Don’t ask me how I know👀👍
Lol thanks for the comments 🙂
I learn so much from your channel. I have a silver paint job coming up soon and the sealer and blending tips are gonna help me alot. Thanks brother👍
Glad to hear that 👊
Great tips and something difrent when you was spraying side ways never seen that before you did a real nice job thank you kandy man stay safe
Glad you liked it husky!
I like how you done it! Thanks a lot for the tips!
Thanks again for your support
Brilliant 👏 video thanks for sharing that very well explained 👍
Another great video
Thanks for the blending silver tips!!!!
great job on that silver,i i did a chevy cruze that was tight on the blend kinda did the same thing you did keep up the good work
Nice. Thanks again
Nice job!Ill have to try this on the next silver job I get.
💪
Your tips are gold.
3M sun gun always dying lol
Heck of a job 👏
Thanks my friend 👊
Great job, thank for the great information
Thanks for watching 👊
Nic sw peinture auto qualifié sw o Sénégal
Very nice you have great experience all round the world are different techniques the results only matters💯💯💯💯
Thanks for watching that's right
Weekend what weekend,I wake up Monday go to work ,then go to sleep and next day is Monday again.😱😱😱
Lol thanks for watching 👊
Nice tip on turning the gun sideways to blend will this work on gold paint also?
Absolutely .thanks for watching
Much thanks and appreciation I've been spraying sideways since I saw you doing this! By the way 9 minutes in you mention sky pads what exactly are those??
Google sky sanding pads they are a cloth sand paper glad to hear you got something out of the video look for the blue ones they are great
Nice tip on the blends! How well does the 3M gun work with clear?
Not bad I've done a video on it 3m gun put to the test sprayed sealer base and clear . Thanks for watching 👊
@@kandyman5315 I'll look for that video. Thanks.
Are you using solvent or water basecoat?
Water
9k?
Yesir
Do you ever use reducer on your sealer edges? Like a melt in clear or anything?
No I don't really have any issue with edges sealer is very good.
@@kandyman5315 came out really good. I use sikkens colorbbuild plus for sealer I never used to melt in my sealer because I didn't even jnownit was a thing. But had issues with halos from.the edge of sealer sometimes on tough colors... I wish I would of thought to sand it with 2000 before base lol... looks like it worked great I may have to give it a try.
@@richmondprofinishes use clear base over colorbuild and it will smooth it out
@@richmondprofinishes Yes it works well and eliminates it completely
@@PaintSociety I use sra because I spray lesonal water. Not sure if it would be om to use the sb clear base to melt in then put water over that? I mean I guess it should be fine eh?