Video není dostupné.
Omlouváme se.
AUDI /VW /SKODA AUXILIARY WATER PUMP REPLACEMENT!
Vložit
- čas přidán 4. 06. 2023
- HELLO EVERYONE AND WELCOME TO A NEW HOW TO DO EPISODE!
IN TODAY'S EPISODE I WILL TEACH YOU HOW TO CHANGE AND FIND THE PROBLEM WITH THE AUXILIARY COOLANT PUMP IN YOUR VW AUDI OR SKODA CAR. TODAY'S EPISODE I AM WORKING ON A 2010 PASSAT B6 AND I WILL SHOW YOU HOW TO REPLACE THE AUXILIARY COOLANT PUMP
BEFORE YOU REPLACE THE PUMP, PLEASE CHECK WHAT PUMP MODEL YOU ALREADY HAVE INSTALLED ON YOUR CAR BECAUSE NOT EVERY MODEL WILL WORK EVEN IF IT IS NEW. I RECOMMEND USING AN ORIGINAL PUMP SPECIFIC TO THE CAR BRAND OR A PIERBURG BECAUSE THEY ARE KNOWN TO ALWAYS WORK.
Disclaimer:
Due to factors beyond the control of HOWTODO, I cannot guarantee against improper use or unauthorized modifications of this information. HOWTODO assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. HOWTODO recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of HOWTODO, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not HOWTODO.
HOW TO DO
Hello thanks for the vid mate, i had a first error p190d for the pump 2 that i changed and then a second error popped p26f8/4 so i changed the 3 pump and i have both code errors now, the pumps a working good. Do you have any idea pls
You should have only two water pumps on the car, one working with timingbelt and the other one it's the one I showed in this video, replace the one which has the error code, make sure it's pierburg or OEM because other manufactures are not working properly on the car and it will still show you a error code
@@HOWTODO0828 hello, I have the same error, I have changed both pumps, but it is still the same error, what could be the error.
Hello, does it affect the speed of the car when the pump is broken or not? This means that in some cases the speed does not exceed 100 km per hour. Thank you. Is it possible to erase it with a scanner from the car’s memory? Thank you
Hello, it does not affect the speed of the car but it will affect the temperature of the engine and if you don't replace it it can brake the head gasket of your cilinders, I recommend you to replace it as soon as possible and only with pierburg or original. The code will not dissappear from the dashboard if you erase it with a scanner tool, only if you replace the faulty part the code will dissappear itself.
Bonjour, je voulais savoir j'avais un voyant moteur allumé sur ma audi A3 2008 140ch qui m'indiquai la pompe a eau auditionel, du coup je l'ai remplacé par une neuve et ensuite je l'est retirer avec la valise mais le voyant moteur ce remet, du coup je sais pas le problème peut venir de quoi on ma dit peut-être le relais, ou le faisceau
If you didn't bought an original auxiliary water pump, or at least the manufacter to be pierburg the engine light will still appear into the dashboard. Only the pieces made by vw or pierburg will work on this cars and only after you install one of this manufacter the problem will dissappear. Also check the harnesses just to make sure everything it's fine. 😎Goodluck
Ah ça je ne savais pas je l’es commander chez autodoc la pièce je vais voir merci
Hi does this pump have 3 pin or 2 pin plug ?
Thanks
Sorry, I don't remember..
2 pin