Video

Don't forget to subscribe to my channel for more informative videos 🙏😎

I installed a new fan resistor and that's why the fan start working back. The problem was with the fan resistor and not with the water temp sensor.

Hello. You base 3 sensors to replace +fuel ramp. 2 of the sensors are located on the ramp. And the third sensor it's mounted on the high pressure fuel pump. After you replace all this sensors and the fuel ramp there's no way you still have the error code. Also try replacing the fuel filter and put some premium fuel in it. Cheers

@HOWTODO0828. I will also change the sensor on the high pressure ramp on Monday. thank you. I will come back with details

You have to check it and see for yourself sir 😎

✅

It's made from rubber my friend. 😎

@@HOWTODO0828 why when I bought a new one it seems like plastic for my E90 320d... bought from Bavarian Auto Parts Malaysia..it can be broken🤔 when hard hit a potholes?

I'm glad you did it properly. 🙏Keep up the good work

If you can't remove it like I did in this video just remove the entire front bumper off and you'll have more access to it.

@@HOWTODO0828 so much more time! Ill try and take it from under by just take the plastic shield of. But thx ! Do you know wich fuse to check? Inside and unde the Hood? The manual is not showing all fuses

I don't understand what you mean

Why are you saying this?

Thanks for the tip!😁🙏

Yes, that's the worst part on this cars. 😬

Hello, yes it's în the black box. Open the box and you find it and then do the checks I showed you in the video 🙏good luck

How in the hell do you get the plastic cover of?? I have a 2011 1,6Vti c4, and I cant get it of? I need to losen the headlights to fight d the hidden bults, but thats not enough! 😢 do i need to get the hole bumper down?

If you want to remove the wires wich are connected to it you have to remove the interior door panel and the rest of the parts from Inside the door. This când only be done from inside the door after removing the door panel

That's wrong. Thank you for feedback 🙏

I confirm that alfa romeo giulietta 1,6 diesel Takeshi 0/30

Thank you 🙏

Glad you liked it!don't forget to subscribe to my channel for more informative videos 🙏🥰

🙏

Glad to hear it. Don't forget to subscribe to my channel for more informative videos 🙏😉

Great suggestion!you're right my friend 🙏thank you for supporting me and my channell ✌️

You're welcome my friend 🙏

Your car it's not made for launching control, probably you burned the clutches, never do this again. Only if you tune the gearbox it will let you Rev up the car in D with the brake pressed and not braking the gearbox.

@HOWTODO0828 yeah I didn't knew that unfortunately. The clutches? But it doesn't move at all. Idk it's just a big problem. Need to go to the garage to check it

For any problem related to automatic gearboxex it will cost you at least 300 euros. They are expensive and in some cases problematic

Oui 😁

Hello. I did replace the camshaft sensor on this type of engine. Not on this particular engine because I never had any problems with it from this car. To replace it you have to remove the timing belt and only after that you'll have acces to it.

Thanks😎

Te salut cu respect🙏

@@HOWTODO0828 ai garajul în România?

Da

@@HOWTODO0828 super. Unde te găsesc? Prin ce zonă?

Sunt din Județul Maramureș. Tu?

I will make a video soon my friend 🙏

I did 🙏

Flywhell need to be replaced on this engine. That's the only problem with it.

My advice to anybody who work on cars it's to buy a dinamometric key and tight most of the bolts and in special the drain plug bolt and oil filter to spec. 25 NM each. You don't want to broke the bolt or destroy the threads cause it's a nightmare and its gonna cost money to replace the oil pan. Good luck. 🙏 Passat b6 with the engine cbab or cbbb made after the year 2008 are the most reliable common rail engines if they are mentained well, also I recommend you to replace the oil and all the filters every 10k kilometers to ensure a good life of the engine.

Thank you for supporting me and my channell, don't forget to subscribe and give a like 🙏

This car was my second one for this job. It took me about 6 complete hours to do it in my garage without lifting the car up because I didn't have an lift (elevator) in the garage. I'm sure anybody who work on Mercedes or who has knowledge can do it even faster then me.

@@HOWTODO0828 good to know. One less garage to go to, dodgy b*stards 😁Thank you for quick reply.

You're welcome my friend 🙏

Glad I could help you. Don't forget to subscribe to my channel for more informative videos 🙏

You are welcome, don't forget to subscribe to my channel for more informative videos 🙏😁

@@HOWTODO0828 Bu bilgiler her zaman çok değerli

Thank you for supporting me and for the feedback 🙏

No😁

You're welcome 😊🙏don't forget subscribe to my channel for more informative videos 😁

Hello. You don't need to do any alignment. If you want to do it just did it but it's not necessarily🙏

​@@HOWTODO0828one more inquiring sir...why my e90 320d m-sport doesn't have stop bump on -4.24 minutes left(first install new mount on new absorber)😅

I don't understand your question sir:))

@@HOWTODO0828 sorry sir my bad in english , but fortunately my problem solved already😍

Hello. What are the problems wich are causing my channel not to grow?

@@HOWTODO0828 Hi there, I am from YT Comment, In your channel have some problems, That's why your channel is not growing. Problems: Title too long-not SEO friendly, Description too short-not have keywords, tags too short-not high rank volume tags, Not doing checklist and backlinks Mainly you not doing SEO your videos. You have to do SEO score at least 100/80. But, Now your SEO Score is 0. So, If you can fix, Your videos will reach to more people and you can generate sales, because, YT algorithm can know about your videos. Also can be Rank your videos, mainly SEO is optimize for google ranking and yt search engine, Hope you understood about SEO, Do you Interested to fix these problems? Waiting for a reply from you!! I am waiting for a reply. thanks, sakib

Glad it helped, don't forget to subscribe to my channel for more informative videos 😎

Thanks for watching!🙏Subscribe to my channel for more informative videos 😁

🙏

If you didn't bought an original auxiliary water pump, or at least the manufacter to be pierburg the engine light will still appear into the dashboard. Only the pieces made by vw or pierburg will work on this cars and only after you install one of this manufacter the problem will dissappear. Also check the harnesses just to make sure everything it's fine. 😎Goodluck

Ah ça je ne savais pas je l’es commander chez autodoc la pièce je vais voir merci

Probably was crashed a little in the front, I can't tell you exactly if the metal part from under the front bumper it's supposed to be like this from the factory or not. Anyway if it's crashed it's only something minor. 🙏Don't forget to subscribe to my channel for more informative videos 😎

@@HOWTODO0828 just found it a strange coincidence, because it doesn’t have any marks on the actual plastic bumper the same as mine

Yes🙏

Glad it was helpful!, don't forget to subscribe to my channel for more informative videos 🙏😁

Feel free to do it in this way 🙏

Thank you, don't forget to subscribe to my channel :)))

There are no problems, it's perfectly fine

😎

any idea plz❤❤

Check the fuses and the wiring from underneath the seat 🙏

@@HOWTODO0828 all good brother but where’s the location of fuses?

I don't know what car do you have. What are you driving?

🙏

@@HOWTODO0828 greetings from Russia! God bless you 🙏

Good bless you too 🙏