A good way to see if the cpu vcore mosfets are shorted as you up the supply is to see if the voltage is getting through. If you get to 1.3v and that’s on the cpu side of the fet it’s shorted
Hello Tim great Video . I have a question, I have the same board 820-01041A and all the USB C ports are stuck on 5V 0.4A ( not boot looping).The PPBUS G3H is 12.3v and the PP3V3_G3H is 3.3v , however PP3v3_S5 is 1.3v. Can I assume that it's a problem with the T2 chip? I bought this computer from a guy who said that he thinks that a little bit of water touched the upper left USB C port of the computer and this is why the computer doesn't turn on anymore. I thought that if water touched the USB C port so probably the CD3215 will be damaged, but I assume it's not the case.Am I right ?
EDIT: PP3v3_S5 will be missing when the T2 firmware is corrupted not PP5v_S5.
We love you Tim ! Thank you for editing your video so we don't have to watch you remove screws ! : )
Nice quick job with a good explanation of your diagnostic process. Thanks Tim
No ouchie test??? :) ... Good job man!!! Good explanation!
Louis patented the Ouchie test - no can use :)
Good jobs bro keep up a good work. I got off fb while ago its hard to keep in touch with you and the rest of the team.
Saved from the dump
thanks for the help
A good way to see if the cpu vcore mosfets are shorted as you up the supply is to see if the voltage is getting through. If you get to 1.3v and that’s on the cpu side of the fet it’s shorted
1.3 is my cut off but I normally can tell way before
This works well! Personally I just use my FLIR but this will definitely work!
Hello Tim great Video . I have a question, I have the same board 820-01041A and all the USB C ports are stuck on 5V 0.4A ( not boot looping).The PPBUS G3H is 12.3v and the PP3V3_G3H is 3.3v , however PP3v3_S5 is 1.3v. Can I assume that it's a problem with the T2 chip? I bought this computer from a guy who said that he thinks that a little bit of water touched the upper left USB C port of the computer and this is why the computer doesn't turn on anymore. I thought that if water touched the USB C port so probably the CD3215 will be damaged, but I assume it's not the case.Am I right ?
Lucky-lucky :). Last couple boards I had with ppbusbus_g3h were shorted mosfets and blown cpus :(
🥺
Nice job
How did you know which value capacitor to replace ?
If the cap is damaged how did you measure the capacitance ?
Schematics and Boardview.
Yo Tim I just saw you by chick fil a lol
Lunch lol..
what thermal camera do you use
It's built into my meter, FLIR DM166