Karcher Snow Foam Cannon - Review USING - Karcher Snow/Ultra Foam - Karcher K2 Pressure Washer
Vložit
- čas přidán 22. 05. 2021
- Karcher Snow Foam Cannon review. With: Kärcher Ultra Foam Cleaner - Kärcher Snow Foam Bottle - Karcher Foam Jet Nozzle (26431470 FJ6 ) & Karcher K2 Pressure Washer.
Is this Karcher Snow Foam Gun ideal for cleaning cars, vans, trailers, conservatories, motorbikes, bicycles, stone, wooden surfaces, roller shutters, blinds, paths, driveways, walls, caravans: Watch to see the Snow Foam Cannon in action.
DETAILS OF THE ITEMS TESTED:
Kärcher Snow Foam Nozzle (26431470 FJ6 Foam Jet ) with 0.6 L Capacity, Karcher Snow Foam Bottle Pressure Washer Accessory:
- Effortless cleaning on varied surfaces;
- Transparent detergent container
- For application of a powerful foam for deep cleaning on all surfaces; With foam boost for a thick foam application
- Suitable for varnish on cars & motorbikes; Ideal for vehicles, garden furniture, facades, stairways, caravans, paths, walls, terraces, driveways glass, stone etc. • Suitable for use with all Karcher K2-K7 pressure washers • Dimensions (L x W x H): 93 x 201 x 184 mm
Kärcher 1 L Ultra Foam Cleaner:
- Ultra Foam Cleaner ('Snow foam') starts to dissolve dirt on contact
- Ideal for use with the Kärcher FJ6 Foam Jet Nozzle
- Specially formulated for use with Karcher pressure washers such as the Karcher K2 used in this Snow Foam Cannon / Snow Foam Lance review.
Note: The pressure washer used was the: Karcher K2 Full Control
AMAZON LINK FOR (non affiliated) - Kärcher 26431470 FJ6 Foam Jet Nozzle with 0.6 L Capacity Foamer for Karcher Pressure Washer:
www.amazon.co.uk/K%C3%A4rcher...
AMAZON LINK FOR (non affiliated) - Kärcher 1 L Ultra Foam Cleaner:
www.amazon.co.uk/K%C3%A4rcher...
Thanks for checking out our video. If you like what we do please like and subscribe. - Auta a dopravní prostředky
Thank you for the demonstration ☺️
Beautifully executed! Thank you sir
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use czcams.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Great job, thanks!!
Husband loves it!!
the machine is very beautiful 👍 never wash a car in the sun 😉😎
hmmm i have a K2.35 and a foam lance bottle thing.. i dont get tho, do i mix the solution as per instructions on the bottle ? doesn't the water coming thru the karcher dilute it /
How big is your pressure washer hose?
How has it protected your paint work? You still have to use the mitt and hand clean it
Just an advice do not make circular motions with microfiber glove it makes swirls on your paiting. Do it horizontal movements back and foraord. Nice video!
Thanks for the comment . We love to improve. Great advice.
Actually in any motion you make it tgere will be a scratch up to some point . If it scratches, it iscratches . "Swirls" are All scratches that occur but only look like that under a light source . But moving the microfiber in one way, with the wind IS actually a good practice ...
2:11 So satisfying...
Sure is. It is like letting an avalanche loose on your car. Thanks for watching it's appreciated
i know right :D
Why not use the mitt while the foam is on the car? thank you
I wanna buy 500ml bottle but when it goes empty can i refill it. I wanna buy 5l also
I would recommend you apply evenly from the bottom of the car upwards and not randomly as demonstrated.
My fj6 doesn't foam
Too much water and foam disappears in like two seconds
Why?
Alot of review says the fj6 canon doesnt produce thick 'shaving' foam and that it produce alot of water. Wondering if one have to get the ratio and quality of shampoo right to get thick foam?
HI Seminsky. We have always used Karcher's own snow foam and have always found it to be very good. To get the foam thick you just need to turn the adjuster on the top up. If you have it on maximum it uses a lot of snow foam. Hope this is of help. Thanks for checking out our vid,
And leave to dwell for ten minutes but ensure it is not allowed to dry in warmer weather.
What makes it not to produce foam
My Karcher snow gun drives me mad every time it is detached from the lance it leaves the small yellow insert on the lance. Which means no other attachments can be fitted until the insert is extracted using a long nose pliers, due to cost cutting design from Karcher! Good pressure washers awful bayonet fitting system for attachments.
How many washes do yo get from one bottle of that stuff
I just got one, used it today l, put it on the lowest level and it seems very economic 5o me
Excellent video helped me make my purchases
How much solution are you using 100m with 300ml water ?
Hi Andrew. Glad it was of help. Thanks for checking out our vid
Hi nice video. Can I use the same foam cannon on a Karcher K2 follow me?
this is with the k2
Whats the point of using the product and the spray clean if you then have to use a mit and spray clean again.
Breaks down heavy dirt and grit so it can be removed a lot safer ensuring when you do hand wash the car, it does not push that dirt and grit into your paint, the most common cause of scratches and swirls is going straight on with a wash mit, safest way to wash your car is a snow foam pre wash, then after rinsing re snow foam the whole car and two bucket wash method to ensure you don’t damage your paint
Dang almost full cannisters. Here that's very expensive. You did not dilute it right?
You should only use like 50ml of snow foam and then 200ml of HOT water. Should be fine mate.
@@Vexzun i wasn't sure what brand he used. With Kärcher soap its not meant to be diluted
@@RomboutVersluijs I have seen other videos with professional prewash products and other foam guns vs. cheap FJ6, you get what you pay for... so your statement is right, you have to use a lot of product to get a decent thick foam... it's not about the pressure washer or the good/bad prewash product but it's about this disappointing foam gun
@@MauroC74 I've seen that check near famous brand and does the same i believe. Isn't it also due to the type of product which is used?
@@RomboutVersluijs yes and no... for example in that video the comparison was FJ6 vs MJJC, a little bit unfair because of the different price range but the video clearly shows that the problem is in the cheap foam gun and not in the product... there was no difference between a Karcher K2 and a K5, both with the FJ6 foam gun and diluition ratio was the same... search for "fj6 misery"... anyway I saw your comments under another Fj6 video and you are right... the conclusion is that you pay less for the foam gun but running costs ramp up to get the same results of a better foam gun such as MJJC
How do yo mix ? How many foam and wster??
Hi Polo. The water is mixed inside the snow foam bottle so it is doen automatically. We hope this helps
@@leveltalk178 they’re asking about the ratio (water:product) , how much of each part
For the same thickness shown in the video i use only the snow foam without any additional water and on karcher k5
Τι karcher είναι
The foam doesn’t cling very well, seems to run right off. And you’ve still got to hand wash it after all that??!!
You clearly dont know what car detailing is
Hello, the new MJJC foam cannon S V3.0 have released,may I know if you like to review it?If yes,would you pls tell me the email? Thanks in advance!
Supposed to work bottom to top
Nice demo proving once more that Karcher foam cannon is a low quality product ...
Ok so can you say why and what you’d use instead?
@@holted1984 You asked - why ? See the video once more and you will see the answer :) I'm using MJJC Pro v2.0. It' s like night and day comparing Karcher ...
First av all you have to count your L/hour mashin,,, How moutch flow do you have in adapter, and so on! this is a bad jobb !
ive been thinking of a nice way to say this....you sir are not good at this