How to Replace Window Regulator 1997-2003 Ford F-150
Vložit
- čas přidán 23. 07. 2024
- Buy Now!
New Window Regulator from 1AAuto.com 1aau.to/ia/1AWRG00445
This video shows you how to replace both the window regulator and the motor on your 1997-2003 Ford F-150. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oaVJ/1AXAA00013
• 11mm Socket 1aau.to/oaUm/1AXAA00015
• 6mm Socket 1aau.to/oaFe/1AXAA00017
• 7mm Socket 1aau.to/oaFe/1AXAA00017
• 8mm Socket 1aau.to/oaFe/1AXAA00017
• Cutoff Wheel 1aau.to/o6/1AXAA00254
• Rivet Gun & Rivets
• Painter's Tape
• Chisel 1aau.to/ojx/1AXAA00055
• Hammer 1aau.to/oIK/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Excellent video and very explained 👍
How do you move the window up to access the lower bracket bolts when the motor is totally dead and window is 100% in the down position??
These should be done assuming the regulator is being replaced because the original is no longer operable. So showing replacement instructions displaying how to get the glass screws out without being able to lower or raise the window to remove the bolts holding the glass.
Awesome video. Thanks man! I had this changed out in a couple hours
Excellent video and very explained 👍
Thank you sir. Excellent job. 👊🏼👍🏼
Excellent video I hope you share more videos
Do you have a video replacing the motor for the windows on your truck it’s just like mine the other videos are different trucks
Does it matter what rivet size you use?
Did you use new rivets?
So u used the same window regulator? Cause on the video show a brand new one, but when trying to put the motor onto the new regulator. It looks like you put the motor on the old regulator. Can you explain us why?
What will a shop charge for this?
So how can u do this is the widow isn't moving because the motor or switch isn't working 🤔
I’m replacing the motor because it’s not working. How do I do it when it’s all the way down and won’t raise?
I've not seen any where rivets had to be grinded off.
Bueno
That's fine if your motor works... lol..
Ok
Worthless. Why is he replacing it if it works?
This guys isn't replying to nobody because he doesn't have the answer for a installation of a dead motor