The whole "this channel uses graphics made from masking tape" was the best reply to that comment. 90% of us dont care about that. We are here to absorb as much knowledge as we can. Not to critique your filming skills. Screw those idiots.
Absolutely. Pete's videos are good enough quality for it not to get in the way of the content, much more than some other professional racers *cough*jefflutz*cough**cough*
Yall wanna see some flickering blinking lights just tune into a race and watch the any tree with LED stage bulbs. Before you tell me how to fix it I have tried setting shutter speed to roughly double the frame rate and everything in between and beyond. Whatever yall are complaining about on Pete’s videos I have never noticed. I think we should just appreciate the good stuff being shown to us here.
Even fox's top notch cameras can't compensate for the frequency of the tree up close. Most don't understand shutter speed to frequency and why led bulbs and Florescent bulbs act as if they are blinking.
Good on you clay for speaking up. Couldn't agree more. My wife's a professional photographer and lighting is a constant struggle no matter how good one is. Not every light is the same either. Ultimately at the end of the day who cares and why say anything. One doesn't even need to watch sometimes you just need to listen to absorb things.
Pete keep on shredding. Your music shreds, your tunes shreds, your builds shreds! Don't let the trolls discourage you brother! I know a lot of us appreciate ALL of your content!
Love the content Pete. People that enjoy your content aren’t here for the production value. We are here for the knowledge and you are a gold mine in that regard.
Some of those comments had me SMFH. Love what you do. I personally dig the music crossover. Much better than the stock music you hear in every other channel’s videos.
Pete, God you're killing it man. I love how you talk to these clowns with the dumb questions. I could probably never afford a car that is deserving of something you build, but I'm here for the wittiness and commentary. Nice job keeping the clowns in check.
In December last year myself and Robby Abbott was lucky enough to be invited to Eric Yosts home for a slow cooked brisket, after the brisket I have ever had we were joined by Pete for some beers around the camp fire. Me and Rob were lucky enough to hear some of the best story’s about engine building and chassis building from 2 of the best in the world. One of the most memorable drinking sessions I’ve ever had! Hopefully one day I return the favour in my backyard here in Australia. Thanks Pete, love your CZcams channel BTW.
Probably because a high percentage of his followers came over from Cleetus’ channel. And we all know most of his followers are pretty ignorant about the technical stuff.
@@danmyers9372well, as a fan of Cleetus AND Pete, I watch them both for the same reasons, no attitudes, no drama, and no BS. I believe both are incredibly talented at what they do, are funny, have a HELL of a strong work ethic, and genuinely treat people rite....pretty good traits if you ask me
LEDs blink if the driver is essentially a basic full wave rectifier. There are (more expensive) LED drivers and fixtures that do not blink because the driver is more complex and supplies clean DC to the LEDs.
Minus the people that are actually upset about nonsensical things, lol - the fun trolling that you catch and deliver back (the fun comments/replies), the people that are just genuinely excited and wanting to learn about engines, tuning and drag racing is awesome as hell to see
F those haters man I love your channel!!! I've been watching Cleetus for a long time and you are 100% responsible for a lot of his success! Keep up the videos!!
Hey Pete, just wanted to take a second to comment based on all the negative comments you showcased in this video. I wanted to shed some light on something immensely positive you do. I am very large in the two stroke world but only learning in the four stroke world.. Your content is right there with Steve Morris.. You both take the time to teach your audience, it's one thing to show what you do or how you do it.. You guys explain why and i cannot tell you how much i appreciate you taking the time to edit and record these videos so a four stroke dummy like me can learn something new.. thank you Pete keep up the good work and stuff
Exactly!! 20yrs ago, you NEVER saw a premiere engine builder, yet alone have a chance to interact with them.. I credit Pete and Steve for not only giving us tidbits to think about, but doing it on social media, and being open honest!! Even if they F up, they own it!
@@justinwebster7761One day perhaps the internet will have smell-a-vision and the ability to be able to reach though your screen so can guzzle a jerk every once in a while. Have a good day and a better tomorrow.
Hey Pete so LED's have PWM (pulse width modulation), theyre essentially strobing so fast you pick that up as brightness. Because camera sensors also sorta work that way youre catching the on off between camera cycles hilariously. Thats why helicopter blades look like theyre not moving if the sync is just right between motion and shutter speed. You'd have to change your shutter speed or go to uhh flourescents again... or honestly just don't care. I'm here for the music and the knowledge and I like how good you are at doin stuff.
Content with meaning and knowledge like yours is rare and helping me understand these concepts much better. I appreciate the great automotive channels and this channel is on list.
I am absolutely loving this content Pete. A "Psychedelic Engine Building Channel" is exactly what I needed. Never realized there were more of us in the center of that Venn Diagram. Rock on brother.
Pete, its the 60hz cycle on the 110. A good way to avoid that is to use and AC to DC power supply and convert you lighting to DC. Alternatively you can use the RED website to calculate for light flicker. Also, for those who may still be wondering. Delta is literally the difference between two numbers. A pressure of 100psi and 75 psi has a delta of 25 psi. Easy peasy.
Pete, there is a real good fix for all the lighting issues others have pointed out in your videos. Ignore those idiot whiners and just keep on doin stuff real good. The rest of us are here for the education, engine design knowledge and some racin.
Love this Q&A. Pete is such a good-natured dude and so kind to share his knowledge with the world. The world would be a better place with more Pete's. I bet if the internet trolls tried to be more like Pete, they might actually be able to be good at doin' stuff. Probably never real good... just good. Do better kids.
Delta is a way to express "Rate of Change." That's all it really is. So as Harrell said in the video, that can be applied to many different things in life. Examples are: How far does the sun move in the sky over a given period of time? How far does a rear shock travel in the suspension of a race car over the distance of a quarter mile? Delta is often introduced in algebra, but usually understood better in a geometrical sense. A little time spent understanding Slope will help. When you see that little triangle shape in the algebraic equations, that usually means delta (rate of change).
Everything garret touches just so happens to turn to gold.. except performance parts.. they usually turn to man glitter.. lol.. thanks for the video pete
Rude as some of those comments were, intro guy is accidentally right. Viewer retention metrics on CZcams did away with long intros a long time ago, and you'd likely see increased channel performance by killing it off. Cleeter has the perfect format nailed down, straight into the video, quick splash screen after setting the scene, onto the action. Then you can have as long an outro as you'd like. Something to consider. Full support for using your Walmart purchased tunes in videos, adds great flavour to timelapses.
7:14 any ‘Animals’ Floyd referral is indeed flattering, since dude knows about that record. that era extends to the ‘Live at Pompeii’ days with a badass live version of “Echoes” that should be played in entirety by anyone with ears attached to a heart, at least once or thrice per month by everyone. cool. thanks. you’re welcome. we could all have beers.
Hey Pete, just want to say that I love your content and I think the film quality is fine. You're one of a small number of people sharing legitimately good knowledge on engine building and calibration. As for the music, it's unique and you're massively talented. It's not my cup of tea but the really cool thing is that I can fast forward through anything I don't want to see and the problem is solved. When you're on top, the haters want to bring you down. Keep doing what you're doing!
Pete - this is a such a great channel. Really enjoy the down to earth, skip the BS and get down to business content. The Q/A format in this video was great - engaging with your audience is awesome. I'll look for an opportunity to get a good question in at some point. Whatever you do, don't quit doing what you're doing!
Fuck the haters, Pete! Like 99 99/100% of the folks here, I'm not here for super high end production, I'm here for the knowledge! Watching your videos is as close to actually being in the shop as you can get.
I get so tired of people commenting on audio etc on my channel. I subscribe to channels for the content, not the production quality. I love the tape and the shared knowledge of this channel great work Pete! Have a great day🤩🤩
Pete, thank you for this video, wading thru the smooth brain comments must have cost you a few brain cells😮 i have heard dome pressure a really great deal and never knew what it meant, your explanation was excellent. I could easily do with more of yor' learnin' and cyphering on the race car engines. NC accent is great by the way.
Pete, obviously there’s keyboard jockeys out there that don’t know what they’re talking about. I love the content you’re real genuine, good dude they don’t love it. They can get off of it. Keep up the good work, brother.
There’s only one complaint that I have and it’s that there’s not enough uploads. lol. I could watch your videos all day if could. I learn a lot from your videos. Thanks for taking the time to share your knowledge.
Continue being Pete and Doing Good Everything. Takes a pair to acknowledge all voices, though many of those voices are just bluejays squawking for attention because they actually think their opinions matter. Thanks for sharing and don't mind the opening rif because it is like a unique signature. Keep up the badass builds and tuning.
I like your comment… Can you imagine showing up on someone’s personal production and thinking you are somehow important enough or worthy enough to dictate how they do things?😂
Q&A is great! Do it again periodically! Love the channel and wear my HED tee-shirt with pride. Music is great, too! Love the tape graphics and the lights are fine! Don’t change a thing!
“This channel has tape graphics” literally the perfect reply to a troll.
Pete's the man
and we love the tape graphics, with the wally-world custom music tracks
Need more of them!
Had me in stitches😂😂
I was going to use masking tape graphics for my channel but I couldn't figure out how to get the plastic off
The whole "this channel uses graphics made from masking tape" was the best reply to that comment. 90% of us dont care about that. We are here to absorb as much knowledge as we can. Not to critique your filming skills. Screw those idiots.
Absolutely. Pete's videos are good enough quality for it not to get in the way of the content, much more than some other professional racers *cough*jefflutz*cough**cough*
💯💯
I am an idiot, AND I do care about the graphics. That is why I freeking love Pete and his channel. :)
Pete....I couldn't give a damn about your filming skills, I'm here to absorb your knowledge on race engines and your musical talent.
Yeah i cant wait to hear what he tells walmart to get them to spit that back at him
This channel has tape graphics… 😂😂 nuff said!
Pete has the most nonchalant way of saying "and your point is???"
Yall wanna see some flickering blinking lights just tune into a race and watch the any tree with LED stage bulbs. Before you tell me how to fix it I have tried setting shutter speed to roughly double the frame rate and everything in between and beyond. Whatever yall are complaining about on Pete’s videos I have never noticed. I think we should just appreciate the good stuff being shown to us here.
Even fox's top notch cameras can't compensate for the frequency of the tree up close. Most don't understand shutter speed to frequency and why led bulbs and Florescent bulbs act as if they are blinking.
Good on you clay for speaking up. Couldn't agree more. My wife's a professional photographer and lighting is a constant struggle no matter how good one is. Not every light is the same either. Ultimately at the end of the day who cares and why say anything. One doesn't even need to watch sometimes you just need to listen to absorb things.
Just Clay Millican chillin in the comments
Couldn't agree more Clay, those complaining are the one's that can't see the forest through the tree's!!
All the bashing yet here’s clay in the comments lol love it!
"Psychedelic engine building channel".
I am most definitely in the right place!
this is exactly the type of oddly specific content I come here for lmaooo
Damn right, I knew I liked this guy.
And the more I see from him the more I want to know what he is up to.
Pete you do an excellent job of explaining things. People will hate regardless of what you do. It is a reflection of those people, not on yourself.
You turn up the fuel, Cleetus turns up the boost. Its a vicious circle.
This channel has tape graphics.. Probably one of my favorite responses to dumb comment of all time.
I never skip your intro, 🤘
People skip the intro? What the heck is wrong with them?
Pete keep on shredding. Your music shreds, your tunes shreds, your builds shreds! Don't let the trolls discourage you brother! I know a lot of us appreciate ALL of your content!
Love the content Pete. People that enjoy your content aren’t here for the production value. We are here for the knowledge and you are a gold mine in that regard.
People that complain about the lighting and the graphics don't get it! I am here for the information and comedy
This is a knowledge based channel, not a look at my editing skills channel. I'm thankful you take the time to make these Pete!
Pete's got it going on folks!
5:08 😂 that’s why we love you Pete ❤ REAL n Good at doin stuff
Pete is just a great person. You don't find that often. Add to that his ability, and you have a rare breed.
Knowledge ✅
Skill ✅
Ability to enlighten ✅
Good Music ✅
Humor on point ✅
Liked ✅
Subscribed ✅
Some of those comments had me SMFH. Love what you do. I personally dig the music crossover. Much better than the stock music you hear in every other channel’s videos.
I CAN'T WAIT!!!
You gotta say it a little louder! 😆
*I CAN'T WAIT!!*
Pete, God you're killing it man. I love how you talk to these clowns with the dumb questions. I could probably never afford a car that is deserving of something you build, but I'm here for the wittiness and commentary. Nice job keeping the clowns in check.
We are not here to see perfect videography we are here to learn about engines ! I think the vids are great Pete. Don’t worry about it
Top notch response with the, “this channel has tape graphics”. Had me damn near in tears laughing. Don’t change, ever.
In December last year myself and Robby Abbott was lucky enough to be invited to Eric Yosts home for a slow cooked brisket, after the brisket I have ever had we were joined by Pete for some beers around the camp fire.
Me and Rob were lucky enough to hear some of the best story’s about engine building and chassis building from 2 of the best in the world.
One of the most memorable drinking sessions I’ve ever had!
Hopefully one day I return the favour in my backyard here in Australia.
Thanks Pete, love your CZcams channel BTW.
Lucky bastard!!! That's bucket list shit there!!
Love reading the comments when CZcams experts tell you how to do it better... Gotta admit you don't have near as many as the usual resident pros lol
Probably because a high percentage of his followers came over from Cleetus’ channel. And we all know most of his followers are pretty ignorant about the technical stuff.
@@danmyers9372well, as a fan of Cleetus AND Pete, I watch them both for the same reasons, no attitudes, no drama, and no BS. I believe both are incredibly talented at what they do, are funny, have a HELL of a strong work ethic, and genuinely treat people rite....pretty good traits if you ask me
Your personality is hilarious!
Keep it up.
LEDs blink if the driver is essentially a basic full wave rectifier. There are (more expensive) LED drivers and fixtures that do not blink because the driver is more complex and supplies clean DC to the LEDs.
Knowledge!
Delta is just a fancy term for variance or difference. The way you handle the insults is great! Love the content. Keep it coming.
I love this crap, and I CAN'T WAIT! for more
Pete has got a great sense of humor.
Keep it up. Ignore the hate. The vast majority of us love the tech talk
You’re real good at responding to the moronic comments. I’m learning
I appreciate your finely tuned level of snark.
When you think of it as a chemical reaction and not just heat and melting it makes more sense. Your content is gold!
Minus the people that are actually upset about nonsensical things, lol - the fun trolling that you catch and deliver back (the fun comments/replies), the people that are just genuinely excited and wanting to learn about engines, tuning and drag racing is awesome as hell to see
Sir, love your intro's, love the knowledge dispensed and the "Walmart music" is epic, please ignore the haters and do your thing!!
F those haters man I love your channel!!! I've been watching Cleetus for a long time and you are 100% responsible for a lot of his success! Keep up the videos!!
Hey Pete, just wanted to take a second to comment based on all the negative comments you showcased in this video. I wanted to shed some light on something immensely positive you do. I am very large in the two stroke world but only learning in the four stroke world.. Your content is right there with Steve Morris.. You both take the time to teach your audience, it's one thing to show what you do or how you do it.. You guys explain why and i cannot tell you how much i appreciate you taking the time to edit and record these videos so a four stroke dummy like me can learn something new.. thank you Pete keep up the good work and stuff
Exactly!! 20yrs ago, you NEVER saw a premiere engine builder, yet alone have a chance to interact with them.. I credit Pete and Steve for not only giving us tidbits to think about, but doing it on social media, and being open honest!! Even if they F up, they own it!
“I got other things to do besides be insulted”
Fucken aye you do, keep it up! 🤙🏾
Damn, this made my day. Your replies to the comments had me literally laughing out loud.
Come on guys the sarcasm and the disrespect is uncalled for I've never heard this man disrespect anybody in a video
It's the internet people say some disrespectful things cause they don't have to worry about getting punched in the mouth for it
@@justinwebster7761One day perhaps the internet will have smell-a-vision and the ability to be able to reach though your screen so can guzzle a jerk every once in a while. Have a good day and a better tomorrow.
@@justinwebster7761- And that’s why I don’t subscribe to any social media platforms. Social media is a sewer.
Just his viewers occasional customers.
@@danmyers9372technically, CZcams is social media... I'm like you in that I don't use other social media. (Much....)
Hey Pete so LED's have PWM (pulse width modulation), theyre essentially strobing so fast you pick that up as brightness. Because camera sensors also sorta work that way youre catching the on off between camera cycles hilariously. Thats why helicopter blades look like theyre not moving if the sync is just right between motion and shutter speed.
You'd have to change your shutter speed or go to uhh flourescents again... or honestly just don't care. I'm here for the music and the knowledge and I like how good you are at doin stuff.
Do some more real good stuff Pete!
The replies to the trolls were priceless!
I like to listen to someone who can explain things, without making crap up. I liked this video
Thank you for your time and talking to us!!!
The video from Pete we didn't know we needed....enjoyed beginning to end thoroughly as usual
Pete is real good at responding to comments. Why am I not surprised? 😂
the masking tape reply was the smoothest more polite "diligaf/gfy " ever
Content with meaning and knowledge like yours is rare and helping me understand these concepts much better. I appreciate the great automotive channels and this channel is on list.
Psychedelic gearhead channel LETS GO!!!
I am absolutely loving this content Pete. A "Psychedelic Engine Building Channel" is exactly what I needed. Never realized there were more of us in the center of that Venn Diagram. Rock on brother.
"world's first psychedelic engine building channel" you have a fan for life lmao
Pete, its the 60hz cycle on the 110. A good way to avoid that is to use and AC to DC power supply and convert you lighting to DC. Alternatively you can use the RED website to calculate for light flicker.
Also, for those who may still be wondering. Delta is literally the difference between two numbers. A pressure of 100psi and 75 psi has a delta of 25 psi. Easy peasy.
Heading to Walmart to fill out one of those questionnaires so I can get better music for my videos.
Great job, Pete. Just do you.
Your a genius sir. Fuck what they say about the music your work speaks for its self
Today I’m real good at learning stuff.
Pete, there is a real good fix for all the lighting issues others have pointed out in your videos. Ignore those idiot whiners and just keep on doin stuff real good. The rest of us are here for the education, engine design knowledge and some racin.
Cmon Pete, play us some pedal steel!
At least you were not crying at the end. Love your videos keep polishing those turds! lol
The David Gilmore compliment. Wowsers :)
Good Shit Pete!
"This channel has tape graphics! Graphics made of masking tape." Had me rollin'
Best intro and music on youtube
I'm a rep for wal mart and I approve Pete's commentary
did not disappoint lol, thanks Pete
I’m dying. Btw my wife just asked “what the fuck are you watching?” “It’s too early for this shit, Chet!” 😂😂😂
Pete's real good at talking about being real good at doing stuff.
Love this Q&A. Pete is such a good-natured dude and so kind to share his knowledge with the world.
The world would be a better place with more Pete's. I bet if the internet trolls tried to be more like Pete, they might actually be able to be good at doin' stuff. Probably never real good... just good. Do better kids.
WHOA I DIDNT THINK ID SHOW UP THANK YOU FOR YOUR TIME PETE!
For the record I know people use both, I've only seen fast LSX. I'm just going off Dart's claims.
Delta is a way to express "Rate of Change." That's all it really is. So as Harrell said in the video, that can be applied to many different things in life. Examples are: How far does the sun move in the sky over a given period of time? How far does a rear shock travel in the suspension of a race car over the distance of a quarter mile? Delta is often introduced in algebra, but usually understood better in a geometrical sense. A little time spent understanding Slope will help. When you see that little triangle shape in the algebraic equations, that usually means delta (rate of change).
Appreciate that 👍
Relating torching a cylinder head to welding is a great reference! 👌🏼
Love the straight forward answers. Tons of information to soak in.
LOVE THE MUSIC AND YOUR KNOWLEDGE , MORE OF BOTH PLEASE
Everything garret touches just so happens to turn to gold.. except performance parts.. they usually turn to man glitter.. lol.. thanks for the video pete
That's the most true statement, at least the man glitter makes for good content.
Got that Wrong. Everything Cleeter touches Blows Up and turns to Junk.
😂
Cleetus. The pure definition of 'Florida Man'.
@ronthepainter3313 By that, a transplant. He's originally from Nebraska.
@timothyhays1817 i lived outside of Lincoln for a while, and Nebraska has some good folks no doubt..
Rude as some of those comments were, intro guy is accidentally right. Viewer retention metrics on CZcams did away with long intros a long time ago, and you'd likely see increased channel performance by killing it off. Cleeter has the perfect format nailed down, straight into the video, quick splash screen after setting the scene, onto the action. Then you can have as long an outro as you'd like. Something to consider.
Full support for using your Walmart purchased tunes in videos, adds great flavour to timelapses.
7:14 any ‘Animals’ Floyd referral is indeed flattering, since dude knows about that record. that era extends to the ‘Live at Pompeii’ days with a badass live version of “Echoes” that should be played in entirety by anyone with ears attached to a heart, at least once or thrice per month by everyone. cool. thanks. you’re welcome. we could all have beers.
Great sense of dry humor, excellent engine building and tuning knowledge. Really love that Walmart music you play.
Don’t feed the trolls Pete!
Love your content, particularly when you take the time to explain details.
Yeah but it can create come pretty good content!
I love the way you said I got better things to do than to get assaulted! 🤣🤣🤣🤣🤣❤ Keep the learning and keep us updated!
Hey Pete, just want to say that I love your content and I think the film quality is fine. You're one of a small number of people sharing legitimately good knowledge on engine building and calibration.
As for the music, it's unique and you're massively talented. It's not my cup of tea but the really cool thing is that I can fast forward through anything I don't want to see and the problem is solved.
When you're on top, the haters want to bring you down. Keep doing what you're doing!
Ah these guys. I like the intro and the music.
Love the way you dispense the trolls and e-idiots with simple fact, logic and reason. You know...like an adult would. Keep it up bro.
Pete - this is a such a great channel. Really enjoy the down to earth, skip the BS and get down to business content. The Q/A format in this video was great - engaging with your audience is awesome. I'll look for an opportunity to get a good question in at some point. Whatever you do, don't quit doing what you're doing!
Pete; you are a patient and knowledgeable man. Thanks.
"Tape Graphics" LOL!! Love it!
Fuck the haters, Pete! Like 99 99/100% of the folks here, I'm not here for super high end production, I'm here for the knowledge! Watching your videos is as close to actually being in the shop as you can get.
I get so tired of people commenting on audio etc on my channel. I subscribe to channels for the content, not the production quality. I love the tape and the shared knowledge of this channel great work Pete! Have a great day🤩🤩
The sarcasm is absolutely as good as the music and the videos!!! Keep killing the videos Pete !!
Love it Pete don't change a f****** thing mate..🇺🇸🇦🇺✊🏻
Screw the guys that criticize your videos.. i learn a ton from you and am grateful.
Pete, thank you for this video, wading thru the smooth brain comments must have cost you a few brain cells😮 i have heard dome pressure a really great deal and never knew what it meant, your explanation was excellent. I could easily do with more of yor' learnin' and cyphering on the race car engines. NC accent is great by the way.
Pete, obviously there’s keyboard jockeys out there that don’t know what they’re talking about. I love the content you’re real genuine, good dude they don’t love it. They can get off of it. Keep up the good work, brother.
There’s only one complaint that I have and it’s that there’s not enough uploads. lol. I could watch your videos all day if could. I learn a lot from your videos. Thanks for taking the time to share your knowledge.
Thanks for the laughs Pete!
Continue being Pete and Doing Good Everything. Takes a pair to acknowledge all voices, though many of those voices are just bluejays squawking for attention because they actually think their opinions matter. Thanks for sharing and don't mind the opening rif because it is like a unique signature. Keep up the badass builds and tuning.
I like your comment…
Can you imagine showing up on someone’s personal production and thinking you are somehow important enough or worthy enough to dictate how they do things?😂
Q&A is great! Do it again periodically! Love the channel and wear my HED tee-shirt with pride. Music is great, too! Love the tape graphics and the lights are fine! Don’t change a thing!
Pete is so smart it makes me feel dumb.😊
Thank you for the youtube education. I look forward to class being in session again soon.
Thank you for sharing your knowledge. I find it comical people complaining about video quality. Great info. Thanks for sharing
Do it really good man, do it good like others cannot do.