Great, I’m glad to know it was useful for you and saved you money. Thanks for watching and commenting. Please like share and subscribe and hit the notification tab. I greatly appreciate it
So I watched the removal and was sooo happy that you got a tripod for vids 1 and 2. Your vids were perfect and I was able to remove and open the bad pump. So for my question: The swashplate bearing was NOT intact. Ball bearings were all over inside. Do you know if that's an available part? And if so, since that happened is it worth trying to salvage the pump VS buying a new one?
Great video.I have a different problem .The release valve(The hex nut(plug) that you turn so you can roll the machine if you have to) leaks from the threads. I did not take the plug all the way out yet.Is there an o-ring on the end of the plug that can be replaced?
Hi.. just bought a secondhand Scag Wildcat which seemed to be in pristine shape. Got it home and of course it leaks :( It appears to be coming from the union of the top and bottom "halves" (quotes because I know the bottom is longer). I am hoping it's not the shaft seal because I'd hate to have to pull the whole thing apart already, but I noticed you didn't change the case seal. Do those tend to go bad, and/or is there any other special reason mine might be leaking from there? It did get bounced around a bit on the ride home, but nothing I wouldn't expect from regular work. Thanks!
hi, could you let me know please what is sequence of vents. the pump is run by the oil moving into the pistons which turn the pully, or, the the pully is powered from the engine and it turns the valve block and pistons which up the oil persure.
Sounds like it needs a rebuild. Check the hydraulic hoses first, make sure there's not a pin hole in the hose or see if it's leaking at the fitting. I hope this helps. Thanks for watching and commenting. Please like, share, and subscribe.
That removal of seal was painful to watch....couldn't you slide out with input shaft? The worn valve plate has a mating part which needs replacement or re-surfacing to make a perfect seal.
+A day to be Great. It kept aerating, making bubbles overflow out of the oil reservoir. ( bad seals) and no I only rebuilt the one. Hope this helps. Thanks for watching and commenting. Please like share and subscribe
I’m so so glad this video exists. Thanks man. Fr. Was about to drop 900 on a new hydro pump
Great, I’m glad to know it was useful for you and saved you money. Thanks for watching and commenting. Please like share and subscribe and hit the notification tab. I greatly appreciate it
nice
I'm glad you liked it. Thanks for watching and commenting. Please like, share, and subscribe.
nice work I like
Should I fill the pump with hydro fluid prior to starting the engine after the rebuild?
i would say yes but you will wanna plug the holes.
Hi im question my lesco hydro 48inch sometimes not want to moved and star made smoke im put all the power forward but not waking after couple minutes
So I watched the removal and was sooo happy that you got a tripod for vids 1 and 2. Your vids were perfect and I was able to remove and open the bad pump.
So for my question: The swashplate bearing was NOT intact. Ball bearings were all over inside. Do you know if that's an available part? And if so, since that happened is it worth trying to salvage the pump VS buying a new one?
Can you turn the valve body 180 degrees and point wheel motor hydraulic hoses the opposite direction?
Great video.I have a different problem .The release valve(The hex nut(plug) that you turn so you can roll the machine if you have to) leaks from the threads. I did not take the plug all the way out yet.Is there an o-ring on the end of the plug that can be replaced?
Do yiu thing have a ploblen whit the hydro pomp
Shalf
Any idea what size threads are in the end of the shaft and what they are for?
How do you flush out the hydro system to make sure there's no medal particals in the system
Shalf hyd pump
Hey nice video. Looks like the barrel of a .45 magnum pistol. Where do you get your rebuild kit and parts.
I need that pulley on that pump any info on it
Hi.. just bought a secondhand Scag Wildcat which seemed to be in pristine shape. Got it home and of course it leaks :( It appears to be coming from the union of the top and bottom "halves" (quotes because I know the bottom is longer). I am hoping it's not the shaft seal because I'd hate to have to pull the whole thing apart already, but I noticed you didn't change the case seal. Do those tend to go bad, and/or is there any other special reason mine might be leaking from there? It did get bounced around a bit on the ride home, but nothing I wouldn't expect from regular work. Thanks!
hi, could you let me know please what is sequence of vents.
the pump is run by the oil moving into the pistons which turn the pully, or, the the pully is powered from the engine and it turns the valve block and pistons which up the oil persure.
I was looking for a video on the zero turn right hydro wheel motor. mines leaks on brake shoes.
Sounds like it needs a rebuild. Check the hydraulic hoses first, make sure there's not a pin hole in the hose or see if it's leaking at the fitting. I hope this helps. Thanks for watching and commenting. Please like, share, and subscribe.
Jason Ppby
C clamp ?
I’m assuming you went to school for that. You good!
no hes just not a fucking idiot.
@@DieselRamcharger check your fucking grammar before checking.
I did replace my left hydraulic pump of an exmark but now both hydraulic pump aren't working it's like don't have any pressure. What should I do
Make sure to hand tighten the bolts on top
That removal of seal was painful to watch....couldn't you slide out with input shaft?
The worn valve plate has a mating part which needs replacement or re-surfacing to make a perfect seal.
Make that cylinder not barrel
Ok so why did you rebuild this was mower not moving forward or reverse and did you rebuild both sides?
+A day to be Great. It kept aerating, making bubbles overflow out of the oil reservoir. ( bad seals) and no I only rebuilt the one. Hope this helps. Thanks for watching and commenting. Please like share and subscribe
My Daddy could have done this! Great video!! 73