I was in manufacturing for 36 years with 3M/Company the first 20 as a production machine operator and then the last 10-15 years 3M got into automation to compete with the rest of the world I learn how to load and operate one these amazing CNN machine I didn't know how to setup one of these CNN machines the money is in writing the data programming these beautiful machine and setting machine I was at loader at 3M Company making 24 dollars an hour an setup person was 30 dollars an and an data programmer got 40 dollars an hour and Enshu Battenfeld and Mori CNN machines and when I retired in 2009 I was making 27 hour starting to do setup on these amazing machines I miss working around them and with them but not enough to come out of retirement I love being retired 10 almost 11 years retired
Nein, er enfernt kein Korrosionsschutz. Die Messingstopfen die ein Bild davor mit dem Enerpack rein gedrückt wurden, werden eben geschliffen, damit die Abstreifer der Rollenumlaufschuhe darüberlaufen können.
I wonder how much this thing costs. What would be the charge rate per hour billed to the customer from the company that buys this thing? A basic 5 axis machine I know of is at a rate of about $150/hr, but this DMG Mori beast would be insane. 0_0
Not sure how much the machining centre cost alone but there is a company in Sweden that have one and they invested 6.5M euro in total (roughly with current exchange rate) for machine, 40ton overhead crane, enlargment of buildings etc.
I get that its a joke but i must comment about this, that is the linear rail, the reference surface is on the SIDE only, not the top, and when he installs the brass plugs to prevent pickup and contamination, he is making it flush to the top so no swarf or chips gets stuck on it.
I am a applications engineer for WFL they were just polishing the ways to remove the protective layer they apply during transit no actual sanding takes place on the ways guides or tracks it was just a cloth pad on the sander
Нее, DMG Mori - компания, которая не даёт сервисную техническую документацию для самостоятельного ремонта. Их специалисты только вытягивают большие деньги. Такие мучения испытываем с этой компанией, вы даже не представляете.
Максим Никишин , а смысл? Уже без них обошлись. Сама компания Хенденхайм знает (DMU-80T и DMU-60T), особенно та контора, которая двигатель проверяла с блоком, сказала, что всё исправно, взяли денег, они знают, какая компания, пусть им будет стыдно. В итоге двигатель был пробит на корпус, как-бы он вращался с блока управления, но для его работы нужно было его посадить на изолятор (даже при проверке не заземлили). Надеюсь станки ещё прослужат достаточно, чтоб их распилить и утилизировать. PLC Блок и други ремонтировали самостоятельно, схемы не дают, как бы типа их менять надо, а их стоимость тысячи долларов (сами понимаете, чья выгода). Ремонт блока управления преобразователями по деталям обошлась в 170р.(обычные элементы 4и-не), а не в 2-3т.долларов, ремонт блока 19А1 входных и выходных портов в 260р.(пара дешифраторов и чуток логики), правда не могли найти некоторые компоненты (выходные драйверы P-типа), но было откуда переставить. Но, чтоб такую работу проделать, пришлось перерисовывать почти всю схему блоков, вот и поймите, какие трудности были. Тут просто вымогательство какое-то, они сами даже не верят, что есть специалисты на разрушенных в перестройку заводах. А по телефону вообще только мозги канифолят.На сайте есть e-mail, так молчат напрочь. Сайт переделали, теперь вообще на старые станки, типа Mikron WF3 ничего не найти, о прошивках вообще молчу. Если купить новый станок, то до первой поломки...
Dear @JonasSinner, thank you for reaching out. For product requests, please use the contact form on our website and our colleagues will follow-up with you: contact.dmgmori.com If you have any further questions, feel free to contact us anytime. Your DMG MORI Social Media Team
DMG - MORI ; MACHINING : C.N.C. ; ROBOT : AUTOMAZATION ; TOTAL ; ( X - Y - Z ) = OPERAÇÃO : 3 D ) ; MACHINING : OF FUTURE ; DMG - MORI ; TECNOLOGY DO FUTURE ; ANO : 2030 : TOP : MACHINING : 3D ; C.N.C. ; 7 AXIS : POSIÇÕES : OPERAÇÕES : FUTURO : CHEGOU : IN MANUFACTURE ; GERMANY ~ JAPAN : ANO : 2030 : TOP - MACHINING .
It is German blood, German Deckel Maho Gildemeister AG, and they are pioneers in the innovation of the main cnc milling machines for the medical field, and they worked with Mori Seiki in 2009 to expand the market in the Asian region. And the product is still based on German products from deckel maho products rather than Mori, which is my personal view. In my opinion in the field of German fabrication and CNC machining robots have more strength and precision.
@@whatthehell6340 if the former Gildemeister company were so innovative and successful, why was it sold to a far smaller japanese company ? Just ridiculous. Maybe because this japanese company has technology superior to the german one.
You can not know about patents and the world of business and technology, and you never sell their brands to Japanese companies, they only work like Nokia - Siemens and Sony - Ericsson first. Selling means the name will not be used again if it is in front of Mori. You have to know that all the software and motion control technology as well as servo motors are the result of developing technology from the west without Japan not having a technology blueprint as soon as you know it. So Japanese maniacs also have to be professional, don't have to insist.
@@whatthehell6340 as i said, the far smaller company of japanese mori bought the Gildemeister company, which had twice the size of mori, for what reason ? That does not make any sense. The most likely explaination is, that the Gildemeister management knew, that their technology will not have a chance against the superior technolgy of the japanese machine tool companies in the along run, because we all know, japanese companies dominate in many high-tech sectors, so the management simply quit the game, hoping to profit from the japanese expertise in the future by being taken over.
Simply amazing! What a video that records the whole process of installation!
This is a great video. I always want to see how big of this machine was. It so great thank you DMG.
I was in manufacturing for 36 years with 3M/Company the first 20 as a production machine operator and then the last 10-15 years 3M got into automation to compete with the rest of the world I learn how to load and operate one these amazing CNN machine I didn't know how to setup one of these CNN machines the money is in writing the data programming these beautiful machine and setting machine I was at loader at 3M Company making 24 dollars an hour an setup person was 30 dollars an and an data programmer got 40 dollars an hour and Enshu Battenfeld and Mori CNN machines and when I retired in 2009 I was making 27 hour starting to do setup on these amazing machines I miss working around them and with them but not enough to come out of retirement I love being retired 10 almost 11 years retired
will install this unit sooner :)
You could takeover the world with that thing.
Holy Shiites; I've lived in smaller apartments than that.
Cum pot seta contrastul monitorului ecranului cu tacsreen
Wounderfull amazing
what a beast...
Damn my old 210P is nothing against this Beast ;) Lets change the complete Head like tools ! Amazing
Dear Santa ...... its HUGE !
Distinguished Master Guardian
lol pleb i''m LE
lmaooo stopped playing that crap game and got back to quake
@@alrieLP imagine flexing your CS rank on a video about CNC machines
I would love to program and run one of this.
Can you post the full video without editing?
besser wie immer soooo groß :-)
wow that thing is ridiculous!
Do the gantry machines use coolant and can you flood the cutting with coolant?
No mostly run dry
대박!
Mother of god..
Was hat der Arbeiter mit dem Bandschleifer auf der Linearführung gemacht?
What did the worker do with the belt sander on the linear guide?
Er entfernt damit Reste des Korrosionsschutzes.
Es ist kein Schleifband installiert, sondern ein feines Polierband.
Danke für die Antwort!
youtube Tutorial no
?
Nein, er enfernt kein Korrosionsschutz. Die Messingstopfen die ein Bild davor mit dem Enerpack rein gedrückt wurden, werden eben geschliffen, damit die Abstreifer der Rollenumlaufschuhe darüberlaufen können.
Great vid. What is the music?
Nice)))))))))))))))
What is the app price of this machine?
High tech machine dmg Mori
nice
this is insane.
I 've never seen a machine that can switch from a high torque vmc to a 5 axis. That's insane.
the japanese are pretty innovative.
@@MrWalker1000 No, the Germans are... Deckel Maho is a german Company...
@@hanschristian4196 Japanese are better
@@hanschristian4196 haven't they joined cooperation with mori seki
Rippems still the same unfortunatly. The spindle is in the ram not the head. There are other machines that change the spindle
Every time I see one of those huge parts, I imagine how much it would suck to get to the end only to find out one of the dimensions was out of spec.
i have DMU50 (small 5axis), someday i want to have it.
I wonder how much this thing costs. What would be the charge rate per hour billed to the customer from the company that buys this thing? A basic 5 axis machine I know of is at a rate of about $150/hr, but this DMG Mori beast would be insane. 0_0
Not sure how much the machining centre cost alone but there is a company in Sweden that have one and they invested 6.5M euro in total (roughly with current exchange rate) for machine, 40ton overhead crane, enlargment of buildings etc.
and now ..take this one and add the 3D Printing like u did it with the 60D...please...i will buy one for the company ;)
combient le prix
This isn't a machine. It is a piece of art!! Can some one tell me how much does this particular machine cost?
Its custom
You're gonna be looking into the millions mate
Was kostet die maschine ?
Drunkenmaster knapp 6,5 Millionen mit Fundament.
1:01 I guess we call that "field lapping'?
I get that its a joke but i must comment about this, that is the linear rail, the reference surface is on the SIDE only, not the top, and when he installs the brass plugs to prevent pickup and contamination, he is making it flush to the top so no swarf or chips gets stuck on it.
Oh das ist aber ne Kanone. Der Arbeiter daran bekommt bestimmt Mindestlohn... Das macht ja alles die Maschine.
I guess the only real use of that CNC mill is machining smaller cnc mills.
Can't believe they are sanding the top of the linear rails..must be the way it's done..I hadn't realised!!
I am a applications engineer for WFL they were just polishing the ways to remove the protective layer they apply during transit no actual sanding takes place on the ways guides or tracks it was just a cloth pad on the sander
I see. I just thought they'd remove the Burr that occured while mounting the Brass Plugs.
In Germany we always sand down our linear rails. :D :D :D Thats the way we do it..
ok, i will just go back to my dmg 70 ecomill T_T
Imagine milling a piece of yours in that.
It would be like
Oh that's your workpiece ? ... thought it's a chip
Schönes ding
Нее, DMG Mori - компания, которая не даёт сервисную техническую документацию для самостоятельного ремонта. Их специалисты только вытягивают большие деньги. Такие мучения испытываем с этой компанией, вы даже не представляете.
Максим Никишин , а смысл? Уже без них обошлись. Сама компания Хенденхайм знает (DMU-80T и DMU-60T), особенно та контора, которая двигатель проверяла с блоком, сказала, что всё исправно, взяли денег, они знают, какая компания, пусть им будет стыдно.
В итоге двигатель был пробит на корпус, как-бы он вращался с блока управления, но для его работы нужно было его посадить на изолятор (даже при проверке не заземлили).
Надеюсь станки ещё прослужат достаточно, чтоб их распилить и утилизировать.
PLC Блок и други ремонтировали самостоятельно, схемы не дают, как бы типа их менять надо, а их стоимость тысячи долларов (сами понимаете, чья выгода).
Ремонт блока управления преобразователями по деталям обошлась в 170р.(обычные элементы 4и-не), а не в 2-3т.долларов, ремонт блока 19А1 входных и выходных портов в 260р.(пара дешифраторов и чуток логики), правда не могли найти некоторые компоненты (выходные драйверы P-типа), но было откуда переставить. Но, чтоб такую работу проделать, пришлось перерисовывать почти всю схему блоков, вот и поймите, какие трудности были.
Тут просто вымогательство какое-то, они сами даже не верят, что есть специалисты на разрушенных в перестройку заводах. А по телефону вообще только мозги канифолят.На сайте есть e-mail, так молчат напрочь. Сайт переделали, теперь вообще на старые станки, типа Mikron WF3 ничего не найти, о прошивках вообще молчу. Если купить новый станок, то до первой поломки...
Just learn English.
Price?
Dear @JonasSinner,
thank you for reaching out. For product requests, please use the contact form on our website and our colleagues will follow-up with you: contact.dmgmori.com
If you have any further questions, feel free to contact us anytime.
Your DMG MORI Social Media Team
DMG - MORI ; MACHINING : C.N.C. ;
ROBOT : AUTOMAZATION ; TOTAL ;
( X - Y - Z ) = OPERAÇÃO : 3 D ) ;
MACHINING : OF FUTURE ; DMG - MORI ; TECNOLOGY DO FUTURE ; ANO : 2030 :
TOP : MACHINING :
3D ; C.N.C. ; 7 AXIS : POSIÇÕES : OPERAÇÕES :
FUTURO : CHEGOU :
IN MANUFACTURE ;
GERMANY ~ JAPAN :
ANO : 2030 : TOP -
MACHINING .
Am used know dmgmori ctx450 ecoline
Dmgmori = japanese engineering, here obviously produced in a factory of the japanese company somewhere in europe.
It is German blood, German Deckel Maho Gildemeister AG, and they are pioneers in the innovation of the main cnc milling machines for the medical field, and they worked with Mori Seiki in 2009 to expand the market in the Asian region. And the product is still based on German products from deckel maho products rather than Mori, which is my personal view. In my opinion in the field of German fabrication and CNC machining robots have more strength and precision.
@@whatthehell6340 if the former Gildemeister company were so innovative and successful, why was it sold to a far smaller japanese company ? Just ridiculous. Maybe because this japanese company has technology superior to the german one.
You can not know about patents and the world of business and technology, and you never sell their brands to Japanese companies, they only work like Nokia - Siemens and Sony - Ericsson first. Selling means the name will not be used again if it is in front of Mori. You have to know that all the software and motion control technology as well as servo motors are the result of developing technology from the west without Japan not having a technology blueprint as soon as you know it. So Japanese maniacs also have to be professional, don't have to insist.
@@whatthehell6340 as i said, the far smaller company of japanese mori bought the Gildemeister company, which had twice the size of mori, for what reason ? That does not make any sense. The most likely explaination is, that the Gildemeister management knew, that their technology will not have a chance against the superior technolgy of the japanese machine tool companies in the along run, because we all know, japanese companies dominate in many high-tech sectors, so the management simply quit the game, hoping to profit from the japanese expertise in the future by being taken over.
I'd say this machine costs a little over $ 10.000 USD.
Add three or four digits...
fuck Lamborghinis when im filthy rich this is what im going to buy
I have seen bigger in Salem,Oregon
That's what she said.
Considering you have no clue what a cnc machine is. I'm going to laugh.
Yeah...these things that I've been programming, setting up and running for the last ten years are a complete mystery to me.
No match for it
Pfffft -- I'm waiting to see the DMG MORI XXXL, this is just a toy.
Raptorman0909 portal CNCs are toys? Ahaha
what the fuck is thiiiiis ????
+mahdi vahedian time lapse video of someone installing a CNC machine
Joar Hagland wow .. why it is so huge ??
haha
the future ^^