Sheet Metal Bender DIY - Bending - Plans In Video
Vložit
- čas přidán 16. 03. 2024
- Sheet Metal Bender DIY - Bending - Plans In Video
Hey everyone!
Welcome to part 2 of making a metal bender .
I dealt with the pressing and locking mechanism of the sheet metal. The video shows the materials I used to build the bending machine and sample dimensions. Each of you can adjust the dimensions to the material you have. There is a lot of work on the bending machine, so the video is divided into three parts. I hope this will help you in building your own sheet metal bender.
I hope that you will like my video and if you do then don't forget to like and subscribe to my channel for more of my work. - Jak na to + styl
Niedziela, 8:30 kawka, relaksik - oglądamy :D
Miłego oglądania.😉
No wyszła igła 👌👍
Dzięki .Jeszcze trochę pracy zostało.
Good job
Thanks
Hola amigo te está quedando muy buena saludos
Thanks
👍👍👍
Porządna robota. Zawsze Podziwiam Pański Talent do konstrukcji i znaczne umiejętności manualne stosowania różnych narzędzi.
Serdecznie pozdrawiam Pana i Fanów Kanału 💖😀.
P. S.: ta tarcza do cięcia stali wyposażona jest chyba w zęby widiowe?
Dziękuję.Tak tarcza widiowa.
Świetnie zrobione👍.Mam pytanie czy nie będzie się przechylać do tyłu podczas gięcia.
Dziękuję .Trafne spostrzeżenie. W końcowej części zobaczysz że będzie zamontowany stopień składany dla większej kontroli nad gięciem.
👍
😉