How to build a DIY Sheet metal Roller
Vložit
- čas přidán 14. 10. 2023
- Easy to build Plans: www.etsy.com/de/listing/15741...
Etsy Shop for plans: madebythemetalist.etsy.com
I really thought a lot about how to build a sheet metal rolling machine as simply as possible. I think I succeeded really well. It was important to me that it wasn't too complicated and that it could be rebuilt with simple tools, like my DIY sheet metal bending machine.
SheetMetalBender: • DIY Sheet Metal Bender... I also made sure that it wasn't too big or too heavy because my workshop is very small. Of course I made sure that I could screw it onto my DIY Welding table.
Best WeldingTable: • Welding Table Build wi... I am very pleased with the results of the test bends with aluminum and sheet steel. Thicker materials also worked well.
Some people were probably wondering what kind of Tig torch it was.
Because health plays a big role for me. I currently have a TigTorch with welding fume extraction in use. And I have to say I'm impressed.
Abicor Binzel xFUME TIG Torch:hubs.li/Q025rrN00
How to buy the Fist Hammer (shipping Worldwide): www.themetalist.de
Building Plans Sheet Metal Roller: www.etsy.com/your/shops/me/li...
Building Plans Welding Table: www.etsy.com/de/listing/94377...
Building Plans SheetMetalBender: www.etsy.com/de/listing/99802...
Etsy Shop: www.etsy.com/your/shops/Madeb...
Friends and Partner from my Channel:
Kemper Welding Fume extractions: www.kemper.eu/en
Stepcraft CNC: shop.stepcraft-systems.com/Home
Ruko Drill bits: ruko.de/en - Věda a technologie
The best metal roller I have seen, appears to be very well designed. Thank you!
Thank you too 😊
Thats the best homemade roller I've seen being made .but agree that tower rollers should be a little closer together. We'll done ✔️
Einen Schraubenkopf als Passfeder zu verwenden, habe ich vorher noch nie gesehen. Das ist wirklich DIY. 😃👍
Dankeschön 👍
Beautiful metal roller. We shared this video on our homemade tools forum this week 😎
Geil, ein Video vom Dirk, da lacht das Herz am Sonntag :-). Super saubere Arbeit, wie üblich, danke fürs Zeigen.
kommt genau richtig zum Feierabend
Vielen Dank 😊 gerne😅
You are talented as hell bro. And those welds are sweet looking. Mad skills.
Thanks a lot 😊
Nice little circle grinding jig! + nice metal roller!
Nice hand-eye coordination using band saw and tools. Clean nice work.
Very nice set up you made
THANKS FOR SHARING THIS INCREDIBLY USEFUL TOOL BUILD!!! AWESOME!!!!!!!!
Dirk, wau... das ist glaube das geilste Projekt von Dir. Erinnert mich an meine Ausbildung zum Kessel-und Behälterbauer. Da hatten wie in jeder Ecke 3-Walzen Rundbiegemaschinen von klein bis fett (25mm Bleche). An meiner Prüfung mußte ich ein Übergangsstück von viereckig auf rund herstellen und auch eine konischen Stutzen für einen Kessel. Mit 24er-Teilung. Lang ist es her....
Mit meinen 54 Jahre im Metallhandwerk finde ich es handwerklich faszinierend umgesetzt. Denke da gibt mir jeder "Schlosser" Recht.
Was mir vor allen Dingen gefällt, das Du es nicht maschinenbaumässig umsetzt (CNC Plasma etc...), sonder so wie es der gelernte Schlosser/Metallbauer macht. Mit den Mitteln die man in der Werstatt hat.
Da soll einer sagen es gibt kein "Made in Germany"
Du legst Dir Deine eigene Messlatte extrem hoch..😉
Hi, sehr nette Worte, solche Kommentare motivieren mich immer wieder aufs neue 😊 Ja das Thema kenn ich heutzutage muss alles gelaser sein weil kaum noch eine vier Löcher bohren kann 😂
Grüße Dirk
@@TheMetalist Wie wahr..
Nice solid build Dirk.. hope your well mate.
Thank you 😁 yes doing good 😊👍
Excellent demonstration of engineering and tallent.
👍😀👍
Thank you 😁
very nice build. a few possible improvements:
- being able to bring the lower rollers closer together = tighter curves & less flat waste at the ends of pieces
- harder/hardened surface on rollers to reduce wear
- grooves in the ends of rollers to enable forming of small tube
Das ist mal ein verdammt gut durchdachtes Gerät 🙂👍 Als Nutensteine für die Stirnräder die Inbus-schraubenköpfe zu nutzen...auf so Ideen muss man erstmal kommen 🙈 Aber wie immer richtig schön gebaut und tolles Produkt. Der Absaugbrenner sieht ganz schön riesig aus aber scheint gut was an Rauch wegzuziehen 🙌
Wenn du die untere Lagerschraube länger nimmst unter der Mittelwalze, könnest du mit einer eingekerbten Mutter sogar noch eine Ablage machen. Freu mich auf jeden Fall schön auf das nächste Video 👀🤗
Vielen Dank 😊
once again . . . . . very impressive , i really liked the manufacturing of the washers (for the rollers) i thought how many times i would have over heated my fingers "doing it my old way" - ha ha
Thank you 😁 👍
Best design for DIY roller, like it, video also very good. 😊
Thank you 😁 😁 😁
12:00 Toller Trick mit dem Passfederersatz! :-) Schönes Video!
Vielen Dank 😊
Moin,
wie immer super „durchdacht“ und saubere Arbeit 👍⭐️⭐️⭐️
Sehr beeindruckend 👍 Echt durchdachte Konstruktion. Und der neue Wig Brenner auch gleich im Einsatz 👌
Danke für das Lob!
Very nicely done
Ich bin zweifach begeistert, vom Projekt und vom Video!
Grüße aus dem Stahlbiotop
Vielen Dank! Grüße Zurück
the thig welds look nice
Nice job, well done.
Geiles Projekt Dirk, danke für deine Videos!
Ja viel dank Herr Beck 😁 gerne doch 😉
Very nice work
Exelente trabajo amigo, gracias por tu aportación.
Hey Dirk, was soll ich sagen wie immer grandios, und der Trick mit dem Radius am Bandschleifer einfach klasse 👍
Vielen Dank 😁😁😁
Nicely done. if you weld in a v shape under the top roller it vill be easier to align back in after you remove the workpiece and a chamfer on the rod then you just have to set it down and push. impressive build bravo
Thank you 😊
Merci pour cette présentation et réalisation de cette cintreuse.
Thank you 😊
素晴らしい治具です♪参考になりました。
I've watched you make many things. I might have to build one of these from your Etsy plans. Thanks.
Thanks Craig 😊
I like your design. Cool technique with the belt sander! Overall you're an awesome person to watch. Very clean workspace and it's apparent through your craftsmanship that you're a patient and precise person.
I have a design question./suggestion. I was wondering why you chose flange bearings? It seems like with your shaft and tube roller construction, you could have gone with interference fit radial bearings. That'd allow you to get the rollers closer, which would result in less 'flat' from rolling ops. It might also be cheaper to buy quality radial bearings rather than a whole flange bearing. But if there's something I'm overlooking feel free to clue me in.
I like your use of sprocket drive too, it'd be really easy to get some gear reduction. I'm planning to build a similar roller, but for bit heavier applications. Probably 60mm tube for the rollers, and some kind of gear reduction system so I can roll 4mm thick 5052.
Alsoalso, check out Acme thread! It's awesome stuff for this application.
Subscribed!
Deui.. Deui.. Deui.. Deui.. Deui.. Bi Ita on cam.. Emng bner kata kakang, lamun expert mah siga keur ngobrol, sanes nju kasurupan. Hahaha sehat selalu kanggo keluarga Bapak, kitu oge kanggo bapak, sehat teras. Salam baktos ti bogor
The genius architect of all things metal. The original metallurgist extraordinaire
Да что он себе позволяет!!! Этот ИНЖЕНЕР!!!
very good work Dirk, as always 😉😉😉
Thank you 😊
Mega geniale Arbeit, Dirk!!!
Vielen Dank!
😊
You are amazing!!!
I like it, Nice work.
Thank you 😊
Nice, Keep it up
Exelente trabajo...
Nice video, thanks :)
السلام عليكم و رحمة الله تعالى و بركاته
عمل ممتاز .
!!!!!!! Awesome workmanship Ther,s pride in this project ya made it easy enough so ya don.t have to be Rocket Genies to make this so thanks for sharin your Project with us signed up for Adventure and I,m thinkin glad found ya I,m old and willing to Learn new stuff glad I did Later from Canada SK Later
Оригинальный способ изготовления втулок .Можно же в токарном станке.
the metal roller is good.
Thank you 😊
This is a symetrc roller; mostly used for small size rollers is an a-symetric model.
In this model: the driven rollers are to far apart; that leaves too much waste material.
When the driven rollers are on the right distance (alsmost against each other) then the chain is not needed and can be replaced with a third gear wheel.
Yes please, I want one……
Good job
Thank you 😁
Top bitte mit Bauplan und was mann alles brauch
ist in der Video Beschreibung :) Plan mit Stückliste
I love to Tig weld
You make it look like you're working with butter.
😂 thank you
like with very soft butter
@@createdesign 😂👍
Très bon travail parole de chaudronnier 👍
Awesome Thank you 😊👍
Amazing work. Did you CAD draw this out, hand sketch or all in your head?
Saubere Arbeit Diggi!😃🤙🏻
Danke 🤙
Schönes Gerät Dirk ,optimale Größe für die Werkstatt.Wenn ich nicht die Möglichkeit im Betrieb hätte etwas zu walzen wäre das perfekt! Grüße Marko
Vielen Dank Marko :)
Thanks for the great video, what make/model of tig welder is that please?
Toujours créatif ! W
you're the best
Good
Well done. and where do you buy prefabricated blanks?
Super
Nice work dude 😍😍
Thank you 😁
el nombre de tu canal es muy original, saludos :)
What tig torch is that? I like it.
Top
Do u by chance have a detailed list of rhe material that you used
What is your finger doing on the TIG torch? Is it tapping to modify gas flow or pulsing the arc or something?
what kind of tig torch is that? first time i see one like this
Durch den abstand der rollen hast du schon einen sehr langen An und Ablauf, is halt diesen stehlagern geschuldet. Schau ma moi wie die Baustahlwalzen nach einem Monat Benutzung ausschauen😅 gibt schon Gründe warum man manchmal härtet. viel spass damit
Genial!
Hi Dirk, geile Idee und Top umgesetzt, die muss ich auch bauen, gibt es einen Plan? Und vielleicht eine Info wo es die Lager, Kettenräder, etc zu bestellen gibt?
Viele Grüße Michael
Das ist ja mal Mega
Vielen Dank 😉
Wow this is awsom machine ❤❤❤❤❤❤❤❤❤❤
Thank you 😁
hello first of all, I am impressed by your machine you have done it really well and above all the welds are really correct, being in the trade I would also like to make one could you give me the exact dimensions in cm thank you in advance
cool as always ;-)
Dankeschön 😊
Nice project! Who makes the magnetic vise you're using at 3:13? Sort of looks like a Fein VersaMag, but it looks a little different. I also like the fume extractor on the TIG torch.
The tig torch is from Abicor Binzel
@@TheMetalist But who makes the magnetic vise?
@@JCWren yes thats the Fein one
This was the comment I needed. I decided I had to buy one immediatly.
А что это за горелка для сварки такая интересная?) Если можно ссылку скинуть ) видос огонь)) успехов в работе
Link in the video description
🔥🔥🔥🔥
I want to buy it how to get this,?
fantastic project. what brand is that tig torch?
Thank you 😊 Abicor Binzel
Hi cooles Projekt. Wie bist du mit dem Abicorabsaugbrenner zufrieden? Saugt der was weg 😂? Wie ist die Handlichkeit?
Hi, ja doch finde in nicht schlecht klar größer und etwas unhandlich ist er natürlich aber lange nicht so wie man es denk. Und meisten legt man den Arm und hand eh irgendwo auf dann merk man es kaum. Und er saug auch gut ab ein Großteil vom rauch bekommt er aber gerade beim wechseln der Positionen wenn das Bauteil noch nach qualmt muss man immer etwas warten.
Danke dir, habe den demnächst im Eisatz, bin mal gespannt.
Hello!
Is it possible to see the construction of this vice?
7:26, 8:03
What is the max thickness can roll
Good question...full length about 3mm
Thebest
Eu preciso de uma máquina dessa, o preço por favor!!!!
Very nice. The link for the plans for the roller doesn't work.
Thank you
Very nice job. What are the dimensions? I am thinking of purchasing the plans.
For sheet metal with a length of 750mm
bearing fl205?
WHAT IS PRICE TO BUY A PLAN
👍👍👍
How to erder manual roller bender 4ft.L.,I want one unit I'm here in the phillipines
Класс.
What kind of camera are you using?
Sony zv1
Cuanto vale esa maquina sin el banco
😊😊😊😊😊😊🎉🎉🎉 muito bom parabéns me inspirou bastante vou tentar copiar a sua ideia 💡 valeu um abraço 🫂.
noice
Самоделка сделана аккуратно но точность валов оставляет сомнения,