How to make a tool for your crankshaft.
Vložit
- čas přidán 21. 05. 2020
- Video on the production of a tool for removing and installing the inner rings of the bearing.
This crankshaft has apparently been modified. The second ring is usually loose.
. . . for more interesting videos click ,, HERE "
/ @paulxchannel - Jak na to + styl
On the newer models CRF's the larger 39.00mm inner bearing has a machined under surface that acts as a sort of double bearing within an bearing MO.
I also have a whole bunch of these puller for the KTM.s, the sizes you need are as follows, 40.40mm, 37.50mm, 31.50mm, thanks for sharing Paul.
Very respectful towards the materials you are working on. Neat idea!
Works effortlessly . I like it 👍
Love the tool, nice work !
You are an artist
New thing from each work. Thank you!
lovely tool!!
Great idea for this tool saved you a lot of money for only about an hours work of labour the material price would be minimal
Sei un grande! Come sempre!
Great video again!!!!👌👍
nice work.
Nice job.
Very nice ,good job
great job mate!..who dislike this and y??
nice work
Nice, simple tools
I like it good job !
Still neat simple and effective, so i still like it.👍
almost looked like the inner race was just "hand pressed in."
still was fun watching though!
good share!
larry
This crankshaft has apparently been modified. The second ring is usually loose.
Nice video
Another good video Paul. I was thinking you need to meet or watch Celso Marscerenhas. The guy is amazing with the stuff he builds.
Practical engineering
Great idea 💡👍👍👍👍
Thank you but this idea is not my.
@@PaulXchannel still thanks for improving our knowledge
😊👍
شكرا الك أخي عمل رائع
No force. Graet job
Maravilloso
Ferramenta muito dez valeu
Freaking Genius 👍👍👍
Sensacional 👏👏👏👏👏
Замечательно 👍😃
Superb for removal but you should never heat a bearing with a naked flame. Heat the tool and let it warm the bearing. All bearings have a maximum temperature that should not be exceeded during installation or operation.
OK.
I try to heat only aluminum tool.
Thanks for the gadget 🇮🇳🇮🇳🇮🇳
Perfect, Big Idea!
Хорошо придумано.
So you heat the tool which puts heat into the ring and expands it so it slips straight off?
Yes
Hello, I guess through feel you were able to feel that the race was seated all the way on crankshaft. If I was doing this I might have lightly tapped once with a diameter tool to check for seating of first ring. But such a nice tool you made and great idea too. May I ask what lubricant did you use for parting the aluminum ? Thank you
This crankshaft has apparently been modified. The second ring is usually loose.
TOP!
Beautiful tool. Does It work with extra tight interference?
Hi . The diameter in the tool must be accurate. Otherwise it will not work.
@@PaulXchannel thanks i'll try soon! I really like your idea.
MASTER
🔥🔥🔥👍
It's genial :)-
geniale...
couldnt you heat the race with a torch till it falls out?
How much £ for same tool to fit sx85 and sx125?
Can you buy the replacement races and sprocket? Who sells them? HONDA dont list these parts in their parts diagram. And how are you going to index the sprocket timong wise? Nice tool, well made.
I do not know. It was brought by the customer.
Thanks.
Hello Paul X, can you do one for me for a NU205ECP?
Всегда забивали два тонких зубила с двух сторон кольца,и оно приподнималось.Дальше можно ухватить съёмником.
Hi Paul, what size did you make the bore in the tool? I am guessing you would want it to be 0.5 thou over bearing size when heated, so when boring you made it 2 thou under bearing size?
Yes
brilliant! how much for one of these?
Thanks.
I am not selling it.
👍👍
👍👍👍
belle outil
Helló! Mennyi az anyagvastasság?
👏👏👏👍👌🇳🇴
its a recommended KTM tool for removing the inner races however the reinstallation in this way will not guarantee the race is not overheated. great metalworking anyway.
Thanks
is this bearing remover made from stainless steel
Aluminium
You are a Crack!