We RANKED Every CIRCULAR SAW From BEGINNER LVL To EXPERT LVL (What Level Are You?)
Vložit
- čas přidán 17. 04. 2020
- We RANKED Every CIRCULAR SAW From BEGINNER LVL To EXPERT LVL (What Level Are You?) In this video we give the #verycoolgang what they have been asking for! This is the official 7-1/4'' Circular Saw rankings video where we rank the best and worst circular saw into 4 different categories - Single Use / D.I.Y. - Apprentice Style - Professional Style - Expert Style. Every one of these circular saw brands gets ranked into a different category, which level are you at? Check out this video to find out! Let us know what you think about the official rankings in the comments section below.
- Jak na to + styl
Someone call the WWE they are missing a carpenter.
"In the blue trunks, we have the Kanye Of Carpentry, ..."
Lmao was just thinking the same about how he spoke
haha, right on dude! this guy is high octane!
"THE CARPENTER "
Ryobi's new pitch phrase "Ryobi. Better than it looks."
I just threw up in my mouth. I've got a ton of Ryobi from 10 years ago
RYOBI built to throw in the trash
Lol. That was your mom's pitch phrase back through high school bro
I don't even need a circular saw but I feel like if I don't go out and buy a Skilsaw my life might be in danger.
HAHAHA!!! A Skilsaw 5150 was the first big power tool I got when we bought our first house. That thing has made my life easier for twenty years, from decks to fences, to stairs. Mine was US-made which they aren't anymore, but they're still great tools.
@@michaelandcolinspop i have a 5150 the bearings died
Be sure to get a cordless one if you want a really intimidating blade for urban survival. A little heavy for EDC tho' - so I wouldn't bother looking for one with a pocket clip. Like whip it out only for SHTF. The Ent uprising must be nipped in the bud - I see them gathering in green-spaces, just looming all broody and shit. This could get ugly.
You will
@@michaelandcolinspop us made? I'm jealous bro
As an Australian I can confirm this is what we sound like on the job site 😂
The number one selling single use diy circular saw of all time is:
The Pizza cutter.
Juan C 🤣🤣
😂😭🤣💯☠️☠️☠️
My pizza cutter still going strong. Multiple use.
😂😂😂
I just 💯 ☠️☠️😂😂🤣🤣
Love that Vince is bringing some of the items out as your talking about them
He had me at Ryobi (9:45) I actively avoided Ryobi for the exact reasons he mentions. It looks cheap, ugly, and amateur, but I had to borrow my brother-in-law's miter saw to install some flooring and was genuinely surprised by how much I liked it...so much that I had to go out and buy my own. It's now one of the most loved tools in my shop.
i own a whole set of Ryobi. It gets the job done even though they arent the best on the market. I would go with Milwaukee or Flex but i don't have the money to shell out for the best of the best
I bought a Cobalt sliding compound miter saw and it's amazing. It's going on 9 years and still good. Also the Cobalt air compressors are really good. The problem with cheap tools is not the tool. It's the battery. The battery is the most important part of a cordless tool. Corded tools you can get away with some cheap tools. My cordless Ryobi tools the batteries died in months. I'll never buy them again. Milwaukee batteries last decades.
Ryobi lacks power though
Just don't buy the finish nailer. Damn thing can't help but stop working.
I LOVE my RYOBI Reciprocating Saw.
The reason for two 18v batts for the Makita is that you can charge both batts at the same time in 45 mins or less, whereas those bigger "red" an "yellow" batts take almost two hrs to charge. Time is money!
Quick charge units shorten that time on those bigger batteries
Time is money. Buy 2 Dewalt 9amps and have one charged while one is working. By the time one dies you'll have another one in the tool. Makita requires you to have 4 whole batteries going
@@JohnDoe-hn5nl quick charge shortens the life of the battery.
@@sessionbox4256 a single dewalt 20v doesn't have as much cutting power, or make as many cuts as a makita double battery. You may have half as many batteries, but you'll make twice as many trips to the battery charger, and it is a nuissance to have a battery die when you're up on a roof, or a ladder, or scaffold. When a person uses cordless circular saws every day, those walks to the charger add up quick, and the batteries can even pay for themselves. Plus, the makita cuts deeper, it's the only saw I know that cuts 2 5/8" depth, which is what's required to cut completely through LVL floor joists (not even corded skillsaw does that, nor dewalt).
@@user-os7qp3ny3k then get a flexvolt battery.
He progressively gets angrier as the video goes I don’t know why.
Well see, that is because you are a delicate little snowflake
More money being spent! Hate spending the money!
Kudos for the video content! Excuse me for chiming in, I would appreciate your opinion. Have you considered - Schallingora Dexterous Programme Scheme (search on google)? It is a great one off guide for building any shed in no time with no experience minus the normal expense. Ive heard some interesting things about it and my BF at last got excellent success with it.
He's only reading your body language, bud: You're just making way too much eye contact. Makes him edgy.
The kid gets excited about his circ saws. LoL
I gotta say I use the flexvolt worm drive style and have used quite a few on the list. Dewalt got it done here, that saw is a beast and my personal favorite. I'm with nick on that!
Mike N i really wish i got the flexvolt one, i got the 18v because it was cheaper
I’ve used the flex volt worm drive style for the past 3 months and it’s insane, feels like it has more power than my corded skilsaw
Josh B yea it is a spendy saw but really the 18v will get the job done too. Pretty much all of these companies have good saws and just keep upgrading constantly to out do one another. Doesnt mean their older models are bad, just a bit slower or cut out a time or two. And I agree Austin Manion, I think dewalt really did equal corder power!
Mike N yeah the 18v is still one of the best out there, absolutely destroys makitas shit.
But sometimes i want a little extra power, but i refuse to buy corded 😂
@@joshbenton810 I agree, the cord gets annoying. I do own the mag 77 and enjoy it but only use it when its convenient
This is the first time I’ve seen your channel brother, you are absolutely hilarious while being completely informative LMFAO! You literally have me cracking up every 20 seconds or so lol.
Great video! Love the enthusiasm. Next time a friend comes over to watch a funny movie, I will tell them I have something better. Then proceed to show them this hilarious video.
I am not a contractor, just a woodworker, DIY kind of guy. For my needs, you can't beat the reliability and power of the corded Makita circular saws. They are built to last decades.
Yeah the corded Makitas are indestructible. I liked the corded Milwaukee sidewinders before they started making them in China around 2006.
Witness!
Thanks for sharing that. I'm a total amateur DIY'er shopping for my first circular saw and after hours of research had arrived at the same conclusion.
My favorite saw will ALWAYS be the Dewalt 378G. That saw looked funky as hell - look it up. But I never used a saw that lent itself to working on the ground, one hand use ripping plywood, or cutting tops off vertical beams in the air so effortlessly. It was the perfect combination of a Skilsaw and a sidewinder. They discontinued it, I patched the cord 5 times, replaced a plug, and cracked the handle and re-stuck it on with gorilla glue. Somehow between my dad and I, it's still alive 20something years later.
There's a reason that many tradesmen refer to circular saws as "skillsaws". I've actually met quite a few that didn't even know they were actually called circular saws. Skilsaw has been around forever, they made them first and they made them right. Skilsaw is to the circular saw what advil is to ibuprofen.
Agree, Skillsaw wormdrive corded are the best and most durable
This guy is great! Laughed through entire video while learning something!
This guy is hilarious, I watched the whole thing and learnt so many hand gestures.
Can not be unseen 🤣
Watch it in 2x speed!! Lol
hahahahahahahahaha 🤣🤣🤣🤣
I was about to say.... what's going on with his hands?
I'm South American, hand gestures are our vernacular so I didn't notice, until now, daim.
Agreed with your list..Next ranking up the impact wrench 👍
These types of videos are honestly the best of this channel! Great video, keep making these!!
Dog, how have I not known about you till now. CZcams needs recommend this to me more!
My name's Kevin Hernandez too 😂
@@KevinHernandez-zk4gb my name is...also...Kevin Hernandez...
Great choice for number 1. I use a skilsaw worm drive every day building fence. Had mine for years, it's taken a beating and it's still performing better than the brand new harbor freight junk that the new guys bring in. Definitely a must-have for anyone who's serious about their craft👍💯
I’m a fan of my Milwaukee and DeWalt tools. However, my father in law uses Ryobi and I used them for the first time this weekend and they are pretty good. Nice work Nick.
I am invested in the M18 Fuel line, and I love my circular saw. Built barns, houses, additions, and I've never had an issue with it. Lasts almost all day with a 12 AH battery.
And believe it or not, I still use my dad's old corded Craftsman once in a while that he got back in... I think the 70's. No bells or whistles like newer saws, but it's all metal, no plastic and just... solid. It still runs like a champ.
"Invested" hmmm interesting
@@adnan9520 yup he never said his circular saw was a m fuel saw !!!
Been a hitachi user for years. Burned out skil, black and decker, craftsman. Hitachi just doesn't stop.
Informative video! I am on a budget and looking for my first saw. I am interested in the corded Ryobi circular saw. I noticed on the Home Depot website, that they have 13 Amp, 14 Amp, & 15 Amp versions. Other than their 1 Amp differences and pricing, should I just get the cheapest one (13 Amps)? What's the noticeable difference from 13 to 14 Amps, or 14 to15 Amps? thx
Wow! Great job on this one. Great energy. I got into this channel because of Vince and his reviews. Entertained and educated by Nick... My gf even checked out the video.
I like these kind of vids. Nick's hand movements made me think he was conducting the orchestra.
lol i was thinking same thing.. thought i said it first.
it's a philly thing. everyone is fluent in sign language
I bought a Chicago Electric circular saw once. It lasted roughly 6 cuts on 2x4s, then it let the magic smoke out.
The couple times the other guy was changing out the saws on the bench, was holding back his laughter 100%
This guy is hilarious. It became a little much near the end but he made me subscribe to this channel. Can't wait to see more.
I watched this video already knowing skilsaw was the best. Hilt is good too, but I usually see them with the powder actuated nail guns. I think the video was pretty spot on to be honest. Good job
Awesome video love the huge energy 😁😂😂 can we get a video in the future with a list of 6 1/2"/165mm circular saws?
Really enjoy watching Nick losing his mind. Even my wife was laughing 😂
Matt Ellermets this dude is hilarious
My wife walked in the room just as he said something about not hurting your "wenis" in relation to power tools.
All my tools are Ryobi and Milwaukee 12/18 and I appreciate that you're giving the line I began with the props and kudos it deserves. Thanks brother.
I grew up calling any circular saw a skilsaw... so technically my dewalts and milwaukees are skilsaws
Same here, we call em skill saw.
Yes sir! They were all skilsaws growing up!
Same.
The serious dedication to tool education= rapid hand movement and minimal blinking =loved this video, he kept my attention, so this gal appreciates your hard work!!! off to home depot I go lol
Thank you!
I do love my Metabo HPT / Hikoki C7BUR with e-brake... It's been a great tool in my DIY-shop.
Not sure where it lands on the list, but I love it! :)
Thank you for doing this I learned.
very informative, and very entertaining this guy is cool, keep them videos coming...
never scene some 1 move their hands for every word they say, for 20 minutes straight. Did learn something new lol👍
😂😂👍🙌🙌
I thought he was orchestrating us haha
I was in a trance the whole time.. got me speaking Australian now and I ain't even leave my quarantined home
Kids do.
Check out Scotty Kilmer, he does car videos, if you want to seem some wild hand moving. 😂
It's the skilsaw saw that I saw not the skil saw that i thought I saw.
"Screaming at your smartwatches........." ahahahahahaha I like this guy! And he has a straight man!!
Why can't I stop watching even though I've already made my decision on which saw to go with?!
If you watch this video muted, Nick is leading the band! Jus kiddin good job great vid!
Thx for the list! Happy Saturday 😊☀️
I appreciate the whole spectrum being exercised. Anybody can test drive a bunch of Ferraris and give an opinion. I wouldn't even have the patience to test the first two classes. You guys actually worked and dealt with honest unpleasantness. Thanks fellas.
I like how vince just appears randomly lol i would have been funny if he walked by with a slice a pizza in his hand or something
There's no way I'd spend 33 mins watching a crappy video. You were brilliant. I was scared to buy one of those bad boys. Now I'm gonna get a Matika! Thanks a million❤️
You go and buy yourself your matika sir, once you arrive at the store, ask for their best matika circular saw
yo i gotta give it to ya this video was epic and the zoom in on him when he is losing his mind was priceless
You are awesome! I am a Ryobi fan and I know they do better in certain areas than others when it comes to their tools but when you started with the Mr. Sister hahah I rewatched that part like 10 times. Great job!
I love the energy and the comedic commentary! I wasn't even looking at a saw until I watched this. Thanks for the video.
The Ridgid and tea people thing was accurate. 😂😂 all the boys at work who use Ridgid also drink a lot of sweat tea
That new Kobalt XTR looks mean. You guys are so lucky getting a hold of them so soon.
"when the octanes octate together" dude I'm dying 🤣🤣🤣
Thank you for this. I'm in the market for a circular saw. My ragged out 12 amp B&D has a date with destiny--and the Grim Reaper
I love the excitement 😂. Can we get a video on different brands of saw blades? I’m a Diablo guy, but I guess not everyone feels the same.
I would like to know the differences and what they all bring to the table
Dewalt is my brand of choice and the flexvolt has performed phenomenally for me for 2 years no regrets.
I’m with ya man but I would love to try the cordless worm drive by skil too
I have all de walt tools too but have burnt up several of them unfortunatly
I like dewalt too but if there both same price for new better technology I want to try it
Your videos are ALWAYS informative! Keep it up brother!
Heeey looks like mac miller didn't die after all, he just became a contractor lol. Handy Mac!
I think Nick needs a Gatorade after this one to replenish his energy because he was so passionate in this video
😂😂👍
Skilsaw is by far the best.... like a sore peter.... hard to beat!!!
Very entertaining and informative. Thx guys!
Great information man. Definitely will helps narrow down my choices.
Glad I could help
I'm ready for y'all to test the KOBALT XTR
Just bought the 3 pack and excited to blow more money lol
@@mryork_ I just tried to get the 5 pack today but they're out of stock everywhere. Idk if I should wait or just get the 3 for now.
Just bought 2 Diablo blades yesterday .... made in Italy ... not Switzerland
SKILSAW blades and some Bosch.... guy. Never said Diablo.
Yeah he did. Listen at 32:10 forward...
I have to say I couldn't wait and skipped to the end to see which was deemed the best circular saw on the market in Expert Class and was so happy to see we agree because I just bought the new worm drive cordless 71/4" Skil. I have been out of the carpenter trade for well over a decade and am sorry to hear some say the brand declined a bit for awhile but I never saw any other circular saw used in the Carpenters Union and I was in for nearly ten years 👍
I've got a Milwaukee rear handle and a DeWalt 60v rear handle. The only thing I don't like about the Milwaukee is the tension is so great on the blade guard that it pulls a 1/16 to the right as you engage the cut. I've still got my old skilsaw corded, but the DeWalt is my saw of choice.
Is this Nick's audition video for a WWE announcer, Lol, the hand flailing is incredible, he looks like an orchestra conductor of the beautiful sounds of the circular saws, show them the tool passion Nick!! Lol👍👍
😂😂😂👍
I like makita corded circular saw working accurate and efficient. Show that next. 👍
Only saw I'll use... But then again, I haven't tried that new skil... Always thought the skil was a low budget saw
Love You Bro! Thank you for making this video. Very Informative Much Appreciated!❤️😀👍
I was entertained and I’m not even a Carpenter but I am looking to buy a circular saw so this will give me some good tips. Thanks! Yes I shared it!
Thank you for the awesome feedback and support Lillith!!
Vince is the man love the seriousness great vid nick.
Thank you lucas!
Nick....You know DeWalt flexvolt should be ranked expert that's all i'm saying but i respect the list. Now rank MiterSaws 10 and 12. Major props on the ranking videos, good job!
13:18 "Say what!?" Just awesome dude.. very passionate about tools comparison.. FYI this is the first video I have seen in your channel and just subscribed too... Noice!!
Thank you for joining the verycoolgang C RED!! Glad to have you here!
This is why i freaking love your channel guys!
Thank you Nick!
That kobalt xtr saw looks slick as hell. Blue/black/yellow....Batman in a saw
I believe that he is the illegitimate son of Ultimate Warrior...
😂😂👍😂
😂😂😂
First of all, I want what he's on. Second, he needs to do every infomercial. Love it. Love the vibe he gives off watching the video.
Amazing video. Just what I needed.
Framer experience Yeah skill saw the best of all time I use deWalt flex volt it’s a beast and makita has an awesome balance
I really like his reviews also. He has jazz hands! All the best Nick!
🙌🙌🙌😂👍
@@VCGConstruction you guys the best. I love your videos. As soon as my divorce is finalized I'm going to sign up for your patreon.
Hey Nick has some class! He’s directing a symphony orchestra with his hands 👍🏻
Just love this guy! Actually came to see circular saw reviews and now binge watching this channel!
Spot on list my man. Thanks for the cool and fun commentary.
Vince walking in the background like a boss
🤣🤣👍🏻
Skilsaw into was the funniest shit I heard! Nice job
It's cool that he does sign language all the way through the video. I'm sure the deaf people really appreciate that. Love you too man!
This guy is too funny! 😂
Thanks for the Vid VCG! 👍
I have a black&decker one and it's old and it still cuts great to this day I only used it about 5 times tho
It's probably good because it's so old.
My first VCG video and hooked. Entertaining and informative.
I've moved to Taiwan so need to purchase new hardware, over here is 120V and as I'm from the UK, it's 240 over there.
Any reviews on jigsaws?
Again, great video and well worth watching.
Wow Nick great vid,very funny and informative...u the man!!
Thank you Alan! You da man really
I got a Cordless Ryobi and it works and cuts great...The Mean Green Machine...🤙
Its makita 36v then 18v milwaukee then skillsaw thats my lineup im a 20 yr vet now days all the saws are pretty good
From an Aussie, down here we have the 3 big brands on site. Dewalt, Milwaukee and Makita. They are the 3 main ones down here. Makita is the cheaper of the bunch so a lot of apprentices start with it. Our cheap once use brand is ozito so if you look them up you can see our 'worse' and they aren't that bad, probly same level as ryobi one
Battery powered and brushless?
thanks brow... love your channel
I have a circa late 1970’s (original owner) Skilsaw 77 worm drive. HEAVY but still running strong 45 years later. Just built a 20’ x 40’ deck with it. Best investment ever. Did I mention it is heavy??? 💪💪👷🏻♂️🏋🏻
The Diablo blades I’ve seen are made in Italy, the company's home country.
From where I live, every circular saw is a Skill Saw. Like every recip saw is a Sawzall
Damn right🤘🏼
Great video,man
Good advice...
I have all the 18v brushless metabo cordless tools and love them...hope to get the 36v stuff in near future!
Nick’s going crazy lmaoo
Makita XSH08Z should be expert. Can be used on a track
garrad miller nah definitely lies in the lower pro level, the dewalt and milwaukee 18v saws are both much better. And then dewalt flexvolt is another level
@@joshbenton810 another level in what way? Having the most power doesn't make something more suited for professionals necessarily.
@h2s i disagree. Its a circular saw that can do anything the others can with an added feature.
You're freaking awesome man ahahaha i laughed hard throughout the video 😂😂😂
OMG!!!!! this guy is hilarious, I gotta say this is by far the best video I have watched in reviews about circular saws, I was laughing more ever minute that went by.