Simple Drill Press Table that TILTS for Angled Holes! (even works with benchtop drill press)
Vložit
- čas přidán 30. 05. 2024
- Download the Fetch Rewards app now → fetch.thld.co/3X3CUSTOM and use the code 3X3CUSTOM to get 3000 points on your first receipt! Thanks Fetch!
Thanks to WD-40 for sponsoring this video!
Find WD-40 Specialist Cleaner & Degreaser at a retailer near you: bit.ly/3zLnVsn
Find WD-40 Specialist Dry Lube at a retailer near you: bit.ly/39mrudG
Huge thanks to Woodcraft for supporting me and what I do! I can't make these videos without them. If you are looking for high quality tools to complete your Woodworking projects, check out their website here -
For more details, check out my website - www.3x3custom.com
____
WOODCRAFT LINKS
Upcut Spiral Bit:
bit.ly/SpiralBit
Dovetail Bit:
bit.ly/HalfInchDovetailBit
Chisels:
bit.ly/WoodriverChisels
Low Angle Jack:
bit.ly/No62LowAngleJack
Jig Hardware Kit with all the Knobs and T-Bolts:
bit.ly/MustHaveJigHardwareKit
Vix Bit for drilling in the center of the hinge:
bit.ly/CabinetMakersBitSet
Bevel Gauge:
bit.ly/BevelGauge
AMAZON LINKS
T-Track:
amzn.to/3l8JDSZ
Hinge:
amzn.to/2USFrw5
Push Blocks:
amzn.to/3BTovWF
Countersink Bit:
amzn.to/3iYk4S1
Plastic Protractor:
amzn.to/3f9HMK1
30º Block:
amzn.to/3rO90e7
Bevel Setting Gauge:
lddy.no/107uq
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :) - Jak na to + styl
This press has worked like a charm for my projects czcams.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
The author does like to from scratch, czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Once again Tamar your design wins me over after watching a ton of video options for drill press tables.
I have a 50 year old drill press with exactly the same problems. How times have NOT changed!
You're very clever. Great solutions.
Hahha glad you like it!
Great job!
A suggestion if I may: consider marking-off along the support arm. The numbers can be made larger, thus more legible, and less likely to break.
That’s a good idea
Yeah, I saw the exact same thing on some other video in the last week or so.
Or even make some positive stop spots (little rounded notch in the arms, assuming they don't change the angel) so you know you hit those more common angles every time.
I’ve had a floor drill press for 40 plus years and never thought of this. You are the best!
Awesome! Thanks!
I really love how you're so thorough in explaining what you're doing and making sure we're all on the same page. The little text edits also help a lot in that regard.
I've never done any woodwork, but I absolutely love watching these videos with my morning coffee.
So awesome to hear!
Tamar, You are so far now from "it just an hobby". You are totally pro. Love it
☺️☺️
You never cease to amaze, Tamar! Just incredible.
☺️☺️
👍👍👍👏👏👏
👏👏👏👏👏👏
You are the jig Queen. What a great drill press table build.
Haha agreed 💯! Very inspiring which is always the goal for a builder. 👍🏼
Haha glad you liked it!
These videos make me wish I had a woodworking shop
Ha
This really felt more like a EUREKA! moment rather that a jig build video. Other than what it is intended to be, the realization of what it can BE more is WAY more satisfying. . .
BRAVO Tamar, as always. . .
Hah thanks!
Excellent video. Thank you from a poor guy who takes good ideas and uses them.
Haha thanks
Two comments:
The piano hinge could have notches cut at the bases of the T-track for access instead of needing to cut the tracks shorter.
The sacrificial insert needs to be much thicker, as drilling on an angle with a wide drill bit (forstner) will go beyond the depth of it on the higher side before the bit has completely gone through the work piece on the lower side.
Luv the way you explain things and make them look more reachable… … I think I have a crush on my new teacher 🤣…. Jokes apart we appreciate the work put into your videos . Thank you
Haha thanks!
I really like the WD-40 Dry Lube. I had to stay out of my shop for a month to be a nurse to my wife fir her knee replacement. I touched up all my metal surfaces with grit blocks and sprayed liberally with the dry lube and looked today and not a speck of rust.
That’s awesome. But hope your wife is feeling better
3x3 custom jig Queen. New nickname, I have gotten more jigs from your channel than from any of the other channels. Thank you so much. Hoping for another guitar build soon.
Haha awesome to hear
@0:57 dat transition tho !
Very slick Tamar!
Haha 🤘
i got massively into woodworking in the beginning of 2020 , i got diagnosed with cancer and while going through chemo , when ever i was actually awake i'd watch woodworking videos on youtube , you are one of three woodworkers who made me wanna start , i just wanted to say thank you , during the time i found ur channel i really really needed something to make me wanna get up and do stuff and the inspiration i got off you made me wanna do that. so thank you very very very much for doing what you do.
Wow. That’s so nice to hear. I hope you are feeling better!
We love watching your shows.
Michael, Lyza, Grace.
Thanks!
It's so awesome to see a large woodworking channel using consumer grade tools. Soo many channels of your sub size have only expensive commercial grade tools.
Also your husband is a very blessed man. He has an awesome wife!
Haha glad you like it
Nice. Another suggestion - make the guides accept non-right angles to allow compound angles for stools etc.
Impressive, always impressive!!! ALWAYS!!!
You’re a genius. Just love your creative solutions.
It was always exciting whenever you take us to your journey! I appreciate the idea of having an insert that is replaceable whenever got teardown!
Glad you like it!
VERY nice jig. Thank you!!
Pretty pretty pretty good Tamar. Awesome video as Always
Glad you liked it!
Beautiful presentation
Thanks!
Tamar that jig is great like all of watch you build, it shows you think a lot and plan before doing your projects, very useful, thanks !!!
Glad you like it!
My name is dadang im from indonrsia. I like your job. Thank you.
Danke für die tolle Idee und die Umsetzung.
U r quite the little engineer that’s amazing and u just got ur degree ⭐️
Hands down hat tipped you're the jig queen without a doubt. This jig by far can be used in all sorts of furniture making. Thanks for sharing your brilliance with us all Tamar!
So glad you liked it!
Everytime I watch your channel I am impressed with your ability to think outside the box
I've been in the business for a lot of year's and never watched a channel that was so enjoyable
Thanks
That’s awesome to hear
Great idea. Thanks!
Great work 🙂👍
Thanks so much!
@@3x3CustomTamar your welcome (: 👍
Brilliant as always! And getting pretty high tech, girl.
Queen of jigs 👍🏻👍🏻
thanks Tamar, I will make my own
👍👍
What an awesome solution. You’re so creative! Love to see your excitement when you saw it all come together. Great job.
Also wondering what you’re going to do with those big slabs behind the drill press
Thanks! No plans for the slabs. Got them for free. So I had to take them…. Ha
Super guter Job und erleichtert das Bohren von schrägen Löchern ,Greetings from Germany
I love that you are you are using your new toy
And that is a great jig!
Glad you like it!
Outstanding! Thank you! What a great jig!
Thanks so much!
GREAT jig Tamar. As always, there is NOT one jig for everyone but we can adjust it for our envoronment.
Thanks! !! !!!
Glad you like it!
Great idea and we’ll done!! I always get great tips from your videos, Thanks!!
So glad you liked it. Thanks!
I have the table from Feb '96 WOOD magazine on my floor model but I need this little jig too. Thanks again
You have all reasons to be happy.
The work ended perfect in every angle. GREAT
👍👍👍
I love the jig. You seem to have quite a knack for these.
Thanks! It’s fun to figure out
A well-designed and useful jig. Thanks!
Glad you like it!
I think I've watched most if not all of your builds Tamar, I think your amazing, I just like to watch and admire your skill and the way you present, I hope your proud of yourself, you should be, you do a great job, you seem like an amazing human.
Thanks for giving me loads of watching enjoy.
Look forward to your next proj.
Take care and stay safe out there.!
Glad you like them! Thanks!
@10:30... Did anyone else just get a craving for waffles?
My second thought was the beginning of Aladdin with the merchant showing the multi-use item. Lol
Tamar,
I love that YT suggested your channel to me. You explain really well, and have some awesome ideas.
Keep up the cool innovations!
Combination hookah and coffee maker! Will not break! It broke…
Another very useful jig and you always explain everything so well......thanks Tamar!
Glad you like it! Thanks!
So much fun to watch you create!
Awesome to hear!
Great idea. Thanks for the inspiration.
Thanks! Glad you liked it!
Great idea well presented thank you.
Glad you liked it! Thanks!
I really like this jig... great job...
Thanks so much!
Great work, once again. Thank you for sharing.
Thanks!
Nice job. Love it.
Thanks!!
Bonjour, je découvre votre chaine et c'est magnifique ! merci !
Awesomely accurate, I like it!!
Glad you like it!
That’s using your noodle! You are one smart cookie!
Glad you like it! ☺️
Brilliant idea! Really nice design.
Glad you like it!
You have an awesome mind. Nice jig. Love ❤️ it
Great idea.Great execution.
Glad you like it!
Supercool jig. Gonna make this one for sure!
Awesome. Have fun with it!
Thank you for sharing this great idea I will be adding one to my drill press cause yes you are right about trying to set the angle on the drill press a real pain in the butt. Keep up the great videos
Awesome! Hope it works out for you!
The master of jig strikes again. Superb construction, well done and efficient.
Haha glad you like it!
Awesome jig - Thanks!
Thanks!
Good concise video. Great build.
Thanks!
You are the queen of Jigs and I am so appreciative of that! Keep up the great work!
Thanks so much!
Great design! I really enjoy your channel and seeing your solutions to problems. Thanks for sharing.
Awesome to hear!
Awesome. I need something like this so much!
Glad you like it!
ANOTHER great one! You have a wonderful mind, Tamar!
Thanks so much!
Tamar, thank you very much for your video, and another great idea. I'm looking forward to your next video.👌
Glad you liked it! Thanks!
That’s a cool jig Tamar! You rock!
Glad you like it!
You do a great job. I am always amazed at your talent and drive. All of the different jigs you have made I would forget which one for what. Keep the videos coming.
So awesome to hear! Thanks!
Love the T-track idea for the fence and clamps. I'm going to have to try that.
Glad you like it!
Great job! I've made many single use angle jigs for my drill press and then thrown them away after. I'll be making this adjustable (and reusable) one soon. The half protractor is a brilliant idea!
Awesome. Glad you liked it!
Amazing once again. I wonder if you would ever consider doing a video on how you learned all these skills. Because not only are you a brilliant woodworker but a brilliant design engineer as well. 🇮🇪😘
Thanks! I’ve been thinking of doing an faq video…
"No walrus harmed" haha. Great video. Now I need a drill press!
Haha thanks!
@@3x3CustomTamar You're awesome. I want to be you someday...
what a cool idea,it really turned out great
Thanks so much!
Great job, thanks for your videos
Glad you liked it!
@@3x3CustomTamar I have been a carpenter for 30 years here in Spain and still I learn a lot from you
thanks
You never seize to amaze Tamar. Thank you for the video. Time for me to build mine.
Have fun with it!
You are doing a good job .I liked the way you presented the program I love that
Awesome to hear. Thanks!
Great idea... always enjoy when your videos come up ... my drill press is tough to set the base for angles too ..... I'll be building this jig this weekend... appreciate your idea and thank you
Awesome. Have fun with it!
Muito bom! Gostei! LIKE! WONDERFUL! top!
Awesome build! I need to make this one.
Glad you like it!
I love your videos. I am impressed with your ingenuity and persistence in your work! Your humor and humility are awesome, too.
FYI, I made a drill press table (not angled like yours) and had the same issue with the elevation crank handle, but I wanted a wider and centered table. What I did was cut three 3/4 inch pieces of plywood the same dimension as the stock table top, and laminated them. I affixed this block on top of the stock table. I then built the table on top of that. This allowed for the crank handle to turn freely under the table top. It decreases the overall depth I can use, but I have never needed that much space. I am not near my shop right now. When I get back to it, I can take a photo and send it if you want.
That’s a cool idea!
Awesome job T!!!
Thanks!
Awesome as usual Tamara!
Thanks so much!
Definitely a useful jig, nice.
Glad you liked it!
Fantastic work, Tamar! Looks and works great! 😃
Brilliant idea!!!
Stay safe there with your family! 🖖😊
Thanks so much!
That's a great jig. Good job!
Glad you like it! Thanks!
Awesome jig, could make the insert part as a metre long piece in advance then just cross cut a section off when your ready for a new one.
That’s a great idea!
Tamar you are awesome. I really love your videos. That you for letting us into your shop.
Glad you like them!
Ben fatto grazie per la condivisione.
Good work thank for share. Ciao from Italy.👌
Si scrive "thanks for sharing"... Su 5 parole ne hai sbagliate 2 e ti sei dimenticato le virgole. Sempre a fare figuracce gli italiani che cercano di scrivere o parlare in Inglese, vero?
@@davidcoyote5612 grazzziiie professore alla prossima lezzzione
Wow that is awesome
Glad you like it!
Another great vid, nice goin', that jig worked great and you made it look simple to build. Keep it up....
Glad you like it! Thanks!
Another great build!
Thanks so much!
Great video, also liked your article in Fine Woodworking. Plan to make those to make those spacers for the router table fence. Now I have to make a tilting table for my drill press. Nice work, thank you!
Awesome to hear! Thanks!
Great idea and project!
Glad you liked it! Thanks!