Cheap 2$ 18650 Battery capacity level Tester | Digital Battery Bar for 14.8V | Car Battery Tester

Sdílet
Vložit
  • čas přidán 7. 04. 2020
  • Features:
    1.Battery type electricity quantity display
    2.Wide application fields:lithium battery
    3.Using Method:connect display board positive and negative port with tested battery positive and negative port,digital tube will display real-time battery electricity quantity
    4.Digital Color:outline red,display block blue (when battery electricity quantity is full,it will be all on)
    5.Size : 31×20mm/1.22×0.79in (Approx.)
    4 Series 4S Display 18650 Li-po Li-ion Lithium Battery Packs Battery Capacity Electricity Quantity Parameter:
    1.When battery voltage is over 13.2V,it will illuminate 1 block electricity quantity
    2.When battery voltage is over 14.0V,it will illuminate 2 blocks electricity quantity
    3.When battery voltage is over 14.8V,it will illuminate 3 blocks electricity quantity
    4.When battery voltage is over 15.6V,it will illuminate 4 blocks electricity quantity
    5.When battery voltage is less than 13.2V,4 blocks display will be off;it represents battery is less than 3.3V,and you can charge the battery

    Wiring :
    Black wire connect negative electrode
    Red wire connect positive
    Connected the display panel positive and negative terminals to the tested battery positive and negative side, then the digital tube will show the battery level
  • Věda a technologie

Komentáře • 16

  • @bankamusafir7245
    @bankamusafir7245 Před rokem

    excellent work very talented boy

  • @RcDude2289
    @RcDude2289 Před rokem +1

    3s battety me 3s solder karna padega?

    • @SolutionHubUmerOfficial
      @SolutionHubUmerOfficial  Před rokem

      you can attach 12v with this module
      you can buy 12v or 16v battery bar module upto your need

  • @DjRahulkushwah8719
    @DjRahulkushwah8719 Před 2 lety

    12 volt battery Se connect ho jayega Kya?

  • @technicalmikelectronic4215

    The middle indicators are not blinking in my module can you plzzz help me

    • @SolutionHubUmerOfficial
      @SolutionHubUmerOfficial  Před 2 lety +1

      First of all you confirm the batteries you connected are exactly output 3s for 3rd bar… like if 3s is in normal state output will be 9v or soo on.
      Second thing check the inside bar leds all working and glow properly?

    • @technicalmikelectronic4215
      @technicalmikelectronic4215 Před 2 lety +1

      Sir I made an 12v lithium battery pack with bms board the voltage is showing constant but the battery level indicator is showing only res light...plzzzz help me sir

  • @MohdIbrahim-qw5qp
    @MohdIbrahim-qw5qp Před rokem

    Sir
    Can I test 3S connection with this module please?

  • @SUMITSINGH-br7hs
    @SUMITSINGH-br7hs Před rokem

    Indicator buying link.?

    • @SolutionHubUmerOfficial
      @SolutionHubUmerOfficial  Před rokem

      PKR 169 5% Off | 1S 2S 3S 4S Single 3.7V Lithium Battery Capacity Indicator Module 4.2V Blue Display Electric Vehicle Battery Power Tester Li-ion
      a.aliexpress.com/_mN0O4NS

  • @MohdIbrahim-qw5qp
    @MohdIbrahim-qw5qp Před rokem

    Can i test 3s 12 volt supply with it please?

    • @SolutionHubUmerOfficial
      @SolutionHubUmerOfficial  Před rokem

      yes in this module contain 4 lights
      1 light refer to 3.7
      2nd refer to 7.4
      3rd refer to 11.1
      4th refer to 14.8
      you can check light according to your battery or given output

    • @SolutionHubUmerOfficial
      @SolutionHubUmerOfficial  Před rokem

      PKR 169 5% Off | 1S 2S 3S 4S Single 3.7V Lithium Battery Capacity Indicator Module 4.2V Blue Display Electric Vehicle Battery Power Tester Li-ion
      a.aliexpress.com/_msGnbrm