Programmable Battery Capacity Level Indicator Tester (JX-4615-A3) || 2S-8S Battery Voltage Checker
Vložit
- čas přidán 10. 12. 2023
- 2S-8S 18650 Li-ion Lipo Lithium 5-30V Lead Acid Battery Level Indicator Tester LCD Display Meter Module Capacity Voltage Meter JX-4615-A3
Working current: 10mA
Working voltage: DC5V-30
Display mode: LED indicator
Refresh speed: 500ms/time
Appearance dimension: 46mm * 15mm * 3mm
LED displays different colors for different battery types:
Red light=lithium ternary battery
Green light=lithium iron phosphate battery
Yellow light=lead acid battery
Function setting:
1: Press and hold the key for 2 seconds to enter the setting state: the mode light (battery 1 type) flashes, and the string number light is always on; Briefly press the key to select the battery type.
2:After confirming the battery type, press and hold the key for 2 seconds to enter the string number 2/voltage setting (the mode light is always on, and the string number/voltage light flashes)
3. Press the button to set the battery string number or voltage; Please refer to the above table option settings for details.
4:After setting, press and hold the key for 2 seconds to save the data and return to the display of 4 power status (or wait for 5 seconds to automatically return)
5 In the setting state, if there is no operation button within 5 seconds, the power will automatically return to the normal display.
1. The first time the product is powered on, the default is 3S voltage of ternary lithium battery.
2. In the normal display state, if there is no operation key within 10 seconds, the product will automatically shut down, display and enter low power consumption. You can manually press the key briefly to close the display and enter low power consumption; When the product is turned off, press the key briefly to turn it on and display the power.
LIKE | COMMENT | SHARE | SUBSCRIBE
=== = = = = = = = == = = = == = = = == = =
== = = = = == = = = = = = = == = = = = = ==
★★ Please like and subscribe ★★
/ @yellowpurple
=== = = = = = = = == = = = == = = = == = =
How to extend wifi range with another router wirelessly
• How to extend wifi ran...
How To Program ATtiny85 Microcontroller with Arduino Uno || Programming And Burn Bootloader
• How To Program ATtiny8...
TP-Link To Netgear Router Wireless Internet Sharing || Router As WiFi Repeater, Range Extender - WDS
• TP-Link To Netgear Rou...
Hack ip camera easy way
• Video
How to extend wifi range with another router
• How to Extend WiFi Ran...
WiFi Jammer/ Deauther || A Simple HomeMade Wi-Fi Jammer by using an ESP8266 | DIY Project
• A Simple HomeMade D.ea...
sokoban level 11 solution
• sokoban level 11 solution
Diy Arduino Based Ultrasonic Radar System || Using Ultrasonic Sensor & Servo Motor With Arduino
• Diy Arduino Based Ultr...
★★=== = = = = = = = ==★★
Contact us for any enquiries :
EmailForViewers@gmail.com
rubel1628
★★=== = = = = = = = ==★★
#yellowpurple
#Battery
#Indicator
=== = = = = = = = == = = = == = = = == = = - Věda a technologie
thank you from philippines
Браво!!!Спасибо👍
Alhamdulillah, finally i found it ❤
Very thanks
Nice. If you'd add the voice, it'd be more easy to understand. I've ordered for this device from China which I am expecting to receive tomorrow. I hope your video will help me to set up the device. Thank you so much❤
Tanks
Nice
Can i use it on my 12V baterry in car?
How can i do it with my 6v 4.5 AH lead acid battery 🔋
Sir please reply
❤❤
Assalamu alaikum
can I use it with a diy power bank
That looked like a 3.7 not 4.2
The 3.7v lithium battery is a lithium battery with a nominal voltage of 3.7v and a full-charge voltage of 4.2v.
@@YellowPurple well there in most charging banks
How is price