3 Things to Check if You Have a Cold Start Rough Idle
Vložit
- čas přidán 11. 01. 2023
- Welcome!
Here are the parts I used in this video:
Delphi MAF Sensor: amzn.to/3X366kB
Map Sensor: amzn.to/3ZpZvSO
Intake Manifold Gasket: amzn.to/3k1R9jX
OBD2 Reader: amzn.to/3ZuCOwU
Throttle Body Cleaner(might be cheaper in the store): amzn.to/3GXnBgw
Fuel Line Remover: amzn.to/3ZwMLdk
Torque Wrench: amzn.to/3QwFdD6
Orange Grip Mats: amzn.to/3ZmBCvv
I have a Patreon and I would love your support: / buildsunited
You'll have behind the scenes access and more!
Check me out on IG: / buildsunited_
I have a website:
AutoMotoNation.com
#BuildsUnited
Disclaimer:
Due to factors beyond the control of Builds United, I cannot guarantee against improper use or unauthorized modifications of this information. Builds United assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Builds United recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Builds United, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Builds United.
Furthermore, the links posted within the description may or may not contain affiliate links. If used, I trully appreciate the support!
My 89 mustang was having a rough idle at start up,, and what I found was that I had one of the oxygen sensors connectors had oil in it that I seen when I went to test the sensors,, apparently I had oil seep from a gasket and got on the connection, I cleaned it,, and now the car runs great,, so to prevent it from happening again I zip tied plastic around the connectors ,,😊
Nice Video I enjoy it.
Good video but one thing troubled me. You said a lean condition caused deposits. I think it would be a rich condition.
To relieve your fuel pressure and not spray fuel on a rag and everywhere else take the fuel pump fuse out and crank the car or truck a few times and the fuel pressure will drop.
.... Or you could just let the car sit all night and I have even less pressure to start with and then follow the same procedure of removing the fuel pump fuse and cranking the engine.
Opening a electric throttle by hand could cause trouble. FYI
Happy wife, happy life. Hope married life is treating you good.
Exactly 🙏 Thank you my friend!
1:57 bank 2 didn’t show the same results as bank 1
Eg machenic
Hairy head 😂
'Promo sm' 💘
sakha republic can’t start car in 45c💀
sakha republic can’t start car in 45c💀