Mx5 Miata 1.8 NB 99 Supercharger M45 build, closer look and sound
Vložit
- čas přidán 29. 03. 2020
- Mx5 Miata 1.8 NB 99 Supercharger M45 build, closer look and sound
Bofi Racing kit
M45 Supercharger with teflon plates
ME221 ECU
Tegiwa radiator
Reroute kit skidnation
Ceramic coated zirgonio manifolds
Sounds amazing and the set up is just clean 🔥🔥 congratulations
Functional art. That’s just a thing of beauty.
I have the same sound in my engine!!! but in my case is just a bad bearing!! lol.. great engine and great sound!!
Beautiful car.
very nice
Very nice 1.6 cam cover
why 1.6 ?
@@mazdacupra unless the NB cars were different, the 1.8 cam covers had the words embossed, whereas they were engraved on the 1.6 covers
@@charlespletzke8311 yes maybe NB are different.
get it tuned at motorsports electronics!! i did.
It feels abit tight
do you know the size of the silicone and metal hoses you've used on the supercharger intake?
No i never checked, it was in the bofi racing kit.
how hard was it to install? lots of adjustments/fittings ?
Would you recommand this Bofi racing SC kit ?
Very nice kit easy to install if you have some basic knownlage. Ask them to send you installation instractions will be help.
@@mazdacupra thank you very much ! Now I'm determined, this is the Kit I need.
Do you have to run two throttle or just one? I see others run this s/c and they have 2
Just one. I don't like extra moving parts.
How is the response?
@@javiervalencia8458 immediate response
@@mazdacupra blow off valve to prevent couplers popping off right? Is there anything else to this setup? I currently have the original crossover tube and TB pre charger. And was wondering what it would take for me to put TB at intake manifold and put in intercooler.
Did you remove the heater radiador?
i remove heater and ac from the car.
hows the reliability? I live in the united states, the most popular kit is called track dog racing and people who own the kit say it's super reliable and they drive the car super hard still.
I use my mx5 80% for track days. If the m45 recondition well will be no problem and reliable .
@@mazdacupra one more question. Do you still have all the parts from bofi racing installed or did you swap out some parts. Its because I am thinking of getting the kit and rather just downland a tune from someone else who has the exact same setup. save $500 dyno tune.
@@WorstPaperCut everything you need includet in the kit. But always you will need more parts when you boost your car. After add bofi racing kit i have to change radietor to a biger one. Olso water rerout kit. Smaller pullay for little more boost. And finaly new clutch. Also add water oil and boost gatdets to monitor your engine.
@@mazdacupra did you ever get a dyno on the car? I read on some miata pages that M45 hp out is like 160 WHP. you stated that the car makes 190WHP on virtual dyno. Unless you did a smaller supercharger pulley.
@@WorstPaperCut not dyno yet. Yes i have smaller pulay. 0.5 bar boost.
hello, what kind of blow off valve did you put?
30euro oem audi TT blow off valve.
@@mazdacupra great! Thank you!
I have another question ... how much pressure do you have? can the blow off open? I have mercedes m45 with the pulley stock. should do 0.3 bar ...
@@c2vts03 i have 0.5bar with 15% pullay.
@@mazdacupra thank you so much
What sort of bypass are you running for closed throttle
I'd also like to know
@@whiteforest09 This setup has the throttle body between SC and the engine. It has a vacuum operated bypass valve that opens under low throttle position conditions, the vacuum signal comes from the intake between the throttle body and the engine.
sorry for late reply, my bypass is from a mini, it was in the kit i order from bofi racing.
Hey
How much money did you spend on this kit?
In 2020 when I bought the kit was around 2800euro, + the tuner, + some extra parts I wanted to add.
What mirrors are those?
I don't remember the name but if you wand them i can sell it to you because i remove them.
How much psi? Stock belt?
7.25 psi with 15% reduce puley
How many power with me221 ?
Around 190hp with virtual dyno. Soon i will go for real dyno
@@mazdacupra ok thanks
Where can I get this ???
If you meant the supercharger kit, check out bofiracing.com
The only thing that puts me off supercharging mine is the sound 😖
You can add second throtle body with a good isolation around your filter you can reduse the sound.
Will bare that in mind, I'm totally in favour of supercharging over turbo, it ties in with main aspect of the mx5 which is good throttle response, I just don't like the supercharger sound, like a knackered bearing
You did all that work but can’t find a better location for the air filter??? Lol!!!
Lol yes my air filter was my nemesis. From then I have changed 10 times the location, custom made airboxes ets. Now i have the most lightweight one, only 20cm straight pipe with filter at the end.
What radiator?
Tegiwa 50mm
Do u have fb or wasap
Yes facebook.com/Mx5Helix