How to Wire Your Nissan Titan Rear Window Swap for a Duramax!!!

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • Nissan Titan Rear Window Part 3!
    Installing the switch, running the wires, operating the window for the first time!!! Also Wiring back up the Defrost
    Thanks For Watching!!!
    Please Like & Subscribe
    Parts Link:
    On Off On Switch:
    www.amazon.com...
    Wago:
    www.wago.com/u...
    Follow Me On: Instagram & Tik Tok!!!!
    Instagram: dmaxlbz_david
    / dmaxlbz_dav. .
    Tik Tok: dmaxlbz_david
    / dmaxlbz_david. .
    Truck Mods!!!
    Nissan Titan Rear Window Swap
    DSP5 switch
    PPE Fuel Rail Race Plug
    AirDog165
    Kryptonite Lower Bump Stops
    Kryptonite Sway Bar End Links
    PPE Stage 3 Tie Rods
    Bilstein 5100 Steering Stabilizer
    Kryptonite Death Grip Full Floating Traction Bars
    Stainless Fuel Lines
    Lincoln Diesel Specialties Sump
    Timken Wheel hubs
    Powerstop Truck and Tow break kit
    Nylon Coated Break Lines
    Russel Stainless Braided Break Lines
    Curt Class 5 2" receiver
    ARP Head Studs, Gaskets
    5"-7" North Spec Built Tip
    5" MBRP Exhaust
    3" Stainless PPE Down Pipe
    PPE Passenger Side Up-Pipe
    Lincoln Diesel Specialties 68mm Turbo
    WCfab cold air in-take
    WCfab Egr Delete
    WCfab Upper Radiator Pipe
    (Blueberry Frost)
    Boost Auto Mirrors
    ReconLighting Cab lights
    ReconLighting Tail lights
    Bushwacker Fender Flares
    Rigid Industries Midnight D series Fog Lights
    Compustar remote start
    Auxbeam LED Headlights ( High&Low Beam)

Komentáře • 28

  • @daproducer25
    @daproducer25 Před 29 dny +1

    Thanks bro for breaking it down step by step. The the drain pan measurements

  • @MulletzTTV
    @MulletzTTV Před 2 lety +2

    Watched half of this video (never seen any of ur vids before) instantly subscribed. I love your energy you’re very enthusiastic and you describe everything very well. Love the truck btw 👍🏼👊🏼

    • @DIYDiesel
      @DIYDiesel  Před 2 lety

      That’s awesome! I definitely appreciate the compliment & support. 🤝

  • @ch.i.c.o5922
    @ch.i.c.o5922 Před 2 lety +1

    I installed my on 2012 sierra I loved ,
    Looking good bro !

    • @DIYDiesel
      @DIYDiesel  Před 2 lety

      Thank! Definitely glad I did it!

  • @musicproductions.
    @musicproductions. Před 2 lety +2

    It looks great 👍

    • @DIYDiesel
      @DIYDiesel  Před 2 lety

      Thank you! I am very happy with how it all turned out 🙌

  • @josephbresse6246
    @josephbresse6246 Před rokem +1

    Love the video and channel bro! Doing one of these on my 2017. Interested in the wagos, any info on what wire you used? Gauge and rough length?

  • @cristobalnunes6728
    @cristobalnunes6728 Před 25 dny

    🤝

  • @lbzhonest5984
    @lbzhonest5984 Před 11 měsíci

    Do you have an updated link for the custom pan ?

  • @whateyedoo
    @whateyedoo Před 9 měsíci

    Need help wiring oem switch to motor switch has 6 wires motor has 4

  • @zachlsims
    @zachlsims Před rokem +1

    I want to do this to my 2012 Silverado. But I have a few concerns about doing it. one of them mainly is the noise factor. Does it sound the same inside the cab on the road as the factory window or is it louder?

    • @DIYDiesel
      @DIYDiesel  Před rokem

      So the window is not louder, but the holes you drill for the drain pan make it much louder in the cab I am not a fan of.

  • @TheCalimed420
    @TheCalimed420 Před rokem +1

    Can you explain which pins you used? On that switch.

    • @DIYDiesel
      @DIYDiesel  Před rokem

      Yes I’m going to make a video on this this week 👍

  • @loganwatson9748
    @loganwatson9748 Před 2 lety +1

    Hey my titan rear window wires are different

  • @johnnyninetytwo
    @johnnyninetytwo Před rokem

    Hey do you still have rear seat belt buckles or did you have to remove them and keep them off

    • @DIYDiesel
      @DIYDiesel  Před rokem +1

      I still have them

    • @johnnyninetytwo
      @johnnyninetytwo Před rokem +1

      @@DIYDiesel can you send me a picture or show me how it looks like when it’s fully installed ?

    • @DIYDiesel
      @DIYDiesel  Před rokem

      @@johnnyninetytwo I have not swapped the middle buckles out yet though, because we just don’t use it. Plan to do that when I take the seats back out here soon

    • @johnnyninetytwo
      @johnnyninetytwo Před rokem

      @@DIYDiesel I want to see the middle buckles and seat installed if you don’t mind. My extended cab has a bench seat in the back with the buckles in the middle and I let my dog ride in the back so I wanna do this swap but I can’t lose the safety function. But I also want to install a drain pan so I’m at the crossroads here any help is appreciated brother I love the content !

  • @JamesAutoDude
    @JamesAutoDude Před rokem +1

    Wait do I see household AC wire connectors being used 🤦‍♂️

    • @DIYDiesel
      @DIYDiesel  Před rokem +1

      What 😆 these are wago connectors. I’ve used them plenty of times with DC control systems for industrial machinery. You are more than welcome to call Wago, and talk to them about this specific product. They are encouraging automotive technicians to use them in the industry more often. Of course people are stuck in there ways though when it comes to shitty scotch locks, or butt splices.

    • @JamesAutoDude
      @JamesAutoDude Před rokem +1

      @@DIYDiesel thanks for the info. They looked like the push type that are more for 110+ volts lol. But I see wago makes them for 12 volt. My life has changed 😳

    • @DIYDiesel
      @DIYDiesel  Před rokem +1

      @@JamesAutoDude absolutely definitely check them out 221 series. Unfortunately they only go up to 10gauge wire, but hands down the future of what wire connectors are going to.

  • @gmangman
    @gmangman Před rokem +1

    These windows tend to leak.

    • @DIYDiesel
      @DIYDiesel  Před rokem

      They absolutely do, but that’s why I installed the drain pan 👍