How to Replace Front Window Regulator 02-10 Ford Explorer

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWR...
1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the 06, 07, 08, 09, 10 Ford Explorer
This process should be similar on the following vehicles:
2006 Ford Explorer
2007 Ford Explorer
2008 Ford Explorer
2009 Ford Explorer
2010 Ford Explorer
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/omh/1AX...
• Phillips Head Screwdriver 1aau.to/omh/1AX...
• 11mm Socket 1aau.to/ok6/1AX...
• 6mm Socket 1aau.to/ojk/1AX...
• 7mm Socket 1aau.to/ojk/1AX...
• Rivet Gun & Rivets
• Ratchet 1aau.to/om6/1AX...
• Socket Extensions 1aau.to/ok6/1AX...
• 1/2 Inch Drill Bit 1aau.to/ok/1AXA...
• 3/8 Inch Drill Bit 1aau.to/ok/1AXA...
• Coarse Threaded Bolts (to replace rivets)
• Wire Ties
• Center Punch 1aau.to/oaj/1AX...
• Hammer 1aau.to/oc3/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Auto Repair Videos: • Ford Auto Repair Videos
How to Replace Window Regulators with Parts from 1AAuto.com: • How to Replace Window ...
For More Info visit us at 1aau.to/h/wU/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@MlKEJ]

Well, thanks again. Last year I needed to do the driver's door, this week the passenger. The driver side cable broke. The passenger side motor quit functioning. I did have to cut the cable since the motor wouldn't cycle the window down. I had to reach in to the uppermost main cable and tug it out to the side with my fingers and the boss (mi esposa) used a bolt cutter on it for me. Cutting the easy to reach cables didn't release the window. I appreciate the effort required to post these videos. Much appreciated.

[@1AAuto]

+Mike Seither Thanks for the feedback!

[@m600blu]

my 2002 explorer ltd has clips opposite the rivets so no drilling required

[@gibby7834]

The door panels on the 02-05 explorers are a little different. Nathan Rohrbough has a pretty good video on them

[@MlKEJ]

Thanks. Very helpful video.

[@chrismiles992]

What was the length of the M6 bolt you used?

[@twincanons]

is there a way to just swap the motors?? I just had to replace the whole door assembly on my drivers front explorer from being hit , i bought a used door and the plugs arent the same so i need to swapp or buy new,,

[@corthirteenth94]

Does the regulator from 1aauto come with new window hardware?

[@1AAuto]

+corthirteenth94 Hardware is not included. Thanks for checking us out!