Simple Drum Sander // 간단한 드럼 샌더
Vložit
- čas přidán 21. 01. 2021
- ==============================================================================
These days, if an email address is entered in a comment, it is automatically classified as spam and deleted. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
요즘들어 댓글에 메일주소가 들어가면 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.
==============================================================================
This is a simple drum sander production video.
It's made using scrap woods and abandoned furniture (MDF).
I will also make an automatic motorized feed mechanism later.
I have linked the used parts purchase site in the description section below.
In addition, i will send you a drawing (png file) to help with your production.
If you need drawings, please leave your email address in the comments.
If you have any questions, please leave a comment and i will explain in detail as much as possible.
Thank you very much for watching.
Hope you enjoyed this video and if you like it, please share and subscribe ^^
심플한 드럼샌더 제작 영상입니다.
자뚜리 목재들과 버려진 가구(MDF)를 사용하여 만들었습니다.
차후에 자동공급 장치도 만들 예정입니다.
사용한 부품 구매사이트를 아래 설명란에 링크 걸어놓았습니다.
또한 제작시 도움을 드리고자 도면(png 파일)을 보내드립니다.
도면이 필요하시면 댓글에 메일주소를 남겨주세요.
혹시 궁금한 사항이 있으시면 댓글 남겨주시면 최대한 자세히 설명드리겠습니다.
시청 해 주셔서 진심으로 감사드립니다.
이 영상이 도움이 되셨기를 바라며 구독과 좋아요 부탁드립니다. ^^
============ Order site (주문 사이트) ==================================
➤ Bearing 8*22*7 mm
www.aliexpress.com/item/10000...
➤ Linear shaft : 8mm
www.aliexpress.com/item/32332...
➤ Insert Nut : M6 x 10mm
www.aliexpress.com/item/32905...
➤ Hand Tighten Knob : M6 32 type2
www.aliexpress.com/item/32874...
============ DIY tools used (사용한 DIY Tools) ==================================
➤ 2 in 1 Scroll Saw & Jigsaw Table // 2 in 1 쓰크롤쏘 & 직쏘 테이블 테이블
• 2 in 1 Scroll Saw & Ji...
➤ Powerful grip force hole-down clamp (Holdfasts) // 강력한 grip력을 발휘하는 홀-다운 클램프
• Powerful grip force ho...
➤ 3-axis Laser guide for crosscut sled (utltra precision) // 초정밀 3축 레이저 가이드 (썰매지그용)
• 3-axis Laser guide for...
➤ Compact "Oscillating" Belt Sander (Part 2) // 컴팩트 "오실레이팅" 벨트 샌더 (Part 2)
• Compact "Oscillating" ...
➤ "Oscillating" Belt Sander (Part 1) // "오실레이팅" 벨트 샌더 (Part 1)
• "Oscillating" Belt San...
➤ Ultimate Table Saw Fence // 정밀하고 사용이 편한 테이블쏘 조기대
• Ultimate Table Saw Fen...
➤ Powerful Wooden Mallet with Aluminum Weight // 알루미늄을 결합한 목공망치
• Powerful Wooden Mallet...
➤ Extreme Crosscut Sled with dust collector & flip stop block // 다양한 기능이 추가된 테이블쏘 설매지그
• Extreme Crosscut Sled ... - Jak na to + styl
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다.
Thank you.
감사합니다.
Hello friend, thank you for this project. I have sent you an email, pls send me drawings. Thank you
Thank you for this, I have sent you an email to request the plans 😊 one of the simplest diy drum Sanders I have seen on CZcams!
I sent you a request by email
sent you an email request for the plans for this project. Thank you very much.
I have sent you an email.
اسبوعان وانا افتش باليوتيوب على تصميم الة سنفرة بوجود قياسات واطوال لغرض عملها ولكن بدون جدوى ؟! الان وجدت مأريد بهذا الفديو ؟ انا شاكر لك لدقة العمل وجماله وكأنه ناطق .. اضافة لدقة القياسات .. اشكرك لاسعادنا وندعي لك بالسعادة وزيادة المشتركين ؟ ولهذا اشتركت بالموقع ..🌺🙏🤝❤️
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
The most precise up and down mechanism because it uses rails, rather than using bolts, I'm making it and it's 70� finished... Thank you for the video, greetings from Indonesia 🇮🇩
This is the most clear DIY from sander video I've seen. I've been wanting to do one but I wasn't confident in the other designs I've seen. I think I will tackle this one! Thanks for the video, subscribing now!
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Outstanding, nice work 🤩🙂
대단한 아이디어 시네요.
드럼샌더가 필요하여 만들려고
여러 동영상을 보았는데..
최고인것 같습니다.^^
참고하여 만들어볼께요.
감사합니다.!!^^
관심 가져주셔서 감사드립니다. 👍
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
Muy genial, muchas gracias desde Colombia
That is just fabulous! I really think I will try it!
This is so good. My compliments on a great project and excellent workmanship. I gotta make one of these! Just what I wanted.
Received the diagrams promptly upon request on Email! Thank you very much! Really appreciate the efforts! Keep up the good work! Cheers
영상 잘 보았습니다 .. 목공학원2달 정도 다녔는데요. 취미로 이것저저것 만들어보고 있습니다
영상보고 많이 배우겠습니다
감사합니다 .
관심 가져주셔서 감사드립니다. 👍
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
Hola , vi tu videos y esta muy bueno y simple , gracias por los planos , sos el unico que mostro como tener todas las medidas , lo voy a hacer y despues te digo como salio , te escrivo desde Melbourne Australia , Soy Argentino de nacimiento y estoy aqui por 33 anios bueno ,te saludo nos vemos en otro videos tuyo ,chau
The requested drawing has been sent.
Thanks for your interest.👍
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
손 재주가 좋으시네요.
좋은 영상 잘 봤습니다~
관심 가져주셔서 감사드립니다. 👍
다른 DIY도 많이 있으니 한번 구경오세요~~ ^^
This is what I've been looking for! Thanks!
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Hi, friend! Great project, good job. You are master!
simple, practico y eficiente y muy bien elaborado diseño te felicito desde sonora Mexico
Lifting system is very nice. Thank you for sharing this nice video.
Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Thanks so much i really liked your sander. I am going to try to make your design. Do you think this can be made slightly wider to handle 20-24 inch wide materials like a cutting board? This would greatly help in finishing after glue ups.
Muy bueno amigo, gracias por compartir. Saludos desde Argentina
Отличный станок,только я бы добавил к нему каретку. Не всегда требуется шлифануть длинную деталь,бывают и короткие,и её кладут на каретку с упором за вал и за ручку вытягивают каретку на себя. Для этого у мотора должен быть реверс,так как вал должен будет вращаться против часовой стрелки,да и по технике безопасности этот вариант лучше,особенно если детали тонкие.
Thanks for the advice. 👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
well-planned and equally well-executed project! thanks for sharing! Drawings please?
Great video, easy to follow. I would like to have plans. Thanks
Thank you, great construction, will contact you for plans. Much joy for you and your creations.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
this is very cool , I am going to build one now, thanks so much :)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Thanks for this excellent DIY tool.
So simple and convenient to make.
I followed with a slight different dimension.
Work is in hand.
Thinking to make two extra drums of different grits, the shaft mount top cap will be modified.
Thanks, Regards & Love from India.
Liked. Subscribed.
good idea, excellent job. Like
Thanks for your interest.👍
I will try to reward you with better videos.
Muy bueno el trabajo, es de lo mejor que he visto. Muchas gracias. Le he pedido el plano.Gracias
Le agradezco mucho. Me envías los dibujos
Gracias
❤ very good!
Can you please send me a page file for the drum sander I have been needing one for so long I love watching you.
This is the best drum sander video I have found. Simple but works great. can you please send me the plans. Thanks.
This seems to be a very easy to build drum sander as I can see, it look simple enough that I am willing to attempt to build one. However, can I get the plans or measurements for this build from you. Thank you for sharing your ideas with others who like to build things as a hobby. TB5
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
O yes, like this, one down to make i think.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Excellent video. I will build one. I have sent you my email for the drawings. Thank you.
Fabulous video! I have sent you my email for the drawings! Best, Alex
I am planning to build this. But I have a question. Is there a practical method to change the sanding paper?
Not because it is worn out but sometimes you need to use different grades. With this setup, you either have to disassamble the cyclinder or untape the sand paper although it still has life in it.
Great job. I would very much like the plans
The requested drawing has been sent.
Thanks for your interest.👍
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Nice idea and thanks for sharing the measurements, the only thing you could show with the caliber was that the faces were perfectly parallel. Can you confirm it for me? So I copy the project 😂😉
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
How many watts is the drill?
Hi! what software use in the minute 1:38? Thank you!
질문이 있습니다. Haase 그라인더로 단단한 막대를 자른 후 사용하는 검은색 것의 이름은 무엇입니까?
관심 가져주셔서 감사드립니다. 👍
마우스 패드를 질문주신건지요 ?
아님 코팅방수합판을 질문주신건가요 ?
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
@@TreeAnWood 👍
Do you ever have a problem of the roller slipping on the metal shaft?
hello, I like your diy work very much, i have sent the email, thank you
Bonjour de France,
Très bon travail avec plans et dimensions
Merci pour le partage
MICHEL31
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Congratulations and thank you very much for your valuable content. Greetings from Chile. I sent you a drawing request by e-mail. Regards.
Hi from Portugal- This is a very nice video. I need from you the drawings please.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
I'd like a measured drawing if possible
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
sent an email request for a copy of the plans, thank you so much
sent email last week, hope you can send me the plan
Thanks
I sent you a request by email
I sent you a drawing request by e-mail. Thanks.