Watch Next 😎👇 🤩 How to Print and Cut Stickers with Silhouette Cameo czcams.com/video/NPTj3MfFAb4/video.html 🖨 How to Print and Cut with Silhouette Cameo czcams.com/video/M3NcIcIlrF4/video.html ✂ Kiss Cut Stickers With Silhouette czcams.com/video/Bjhg7mgOQKk/video.html
Decent intro but lacking what I feel is important info for a beginner. 1.Taking 30 seconds to say the file included the cutlines would be important information for beginners. 2. The default cut settings are far from perfect. Each machine seems to have its own quirky personality but more importantly 1 setting is not a fit all. The sticker paper you use will GREATLY affect the cutting. Is it matte? Glossy? Is it thick or on the thinner side? Not being given this information could cause a newbie to think they are doing something wrong and be very frustrated. There is a learning curve. Ask me how I know 🤦♀️
Do you have a recommendation for sticker paper? I'm looking for a matte white sticker paper with a smooth backing that doesn't stick to the mat. I'm still experimenting in general, but I have to use the back of the mat with double sided tape. If I use the normal side, it won't release the sticker paper without tearing the backing.
I'm a little late in commenting, but THANK YOU for a very direct, blunt approach to this print-and-cut concept I knew nothing about. I got a Portrait3 for Christmas and was getting overwhelmed by other videos that were so long-winded and confusing. I appreciate your simple and clear instructions, thank you!!
Thank you so much Vanessa! So glad you got your Portrait 3! There is so many amazing crafts you can do with it! If there is anything we can help with please don't hesitate to ask! We love helping crafters out 😊
Hi! I noticed that you had 2 upper corner stickers in the hashed area. Did those print and cut properly? I’ve always thought that images for print and cut should not be placed not just outside the border lines but also in the hashed area. Is this not the case anymore?
I tried everything you said, and it only cut a line at the bottom of the page. Am I missing something? Why didn't it cut the actual stickers? How does the silhouette recognizes the actual stickers shape?
I have the portrait 1 and yes, you can. I use a holographic, self adhesive foil after printing. You need to adjust the blade, depth an pressure. It took me a moment to figure out the correct adjustments, but then it worked very well.
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
Watch Next 😎👇
🤩 How to Print and Cut Stickers with Silhouette Cameo
czcams.com/video/NPTj3MfFAb4/video.html
🖨 How to Print and Cut with Silhouette Cameo
czcams.com/video/M3NcIcIlrF4/video.html
✂ Kiss Cut Stickers With Silhouette
czcams.com/video/Bjhg7mgOQKk/video.html
Glad to see Silhouette
Thank you for watching!
Decent intro but lacking what I feel is important info for a beginner. 1.Taking 30 seconds to say the file included the cutlines would be important information for beginners. 2. The default cut settings are far from perfect. Each machine seems to have its own quirky personality but more importantly 1 setting is not a fit all. The sticker paper you use will GREATLY affect the cutting. Is it matte? Glossy? Is it thick or on the thinner side? Not being given this information could cause a newbie to think they are doing something wrong and be very frustrated. There is a learning curve. Ask me how I know 🤦♀️
Do you have a recommendation for sticker paper? I'm looking for a matte white sticker paper with a smooth backing that doesn't stick to the mat. I'm still experimenting in general, but I have to use the back of the mat with double sided tape. If I use the normal side, it won't release the sticker paper without tearing the backing.
I'm a little late in commenting, but THANK YOU for a very direct, blunt approach to this print-and-cut concept I knew nothing about. I got a Portrait3 for Christmas and was getting overwhelmed by other videos that were so long-winded and confusing. I appreciate your simple and clear instructions, thank you!!
Thank you so much Vanessa! So glad you got your Portrait 3! There is so many amazing crafts you can do with it! If there is anything we can help with please don't hesitate to ask! We love helping crafters out 😊
Thank you for this SHORT and to the point video! It was exactly what I was looking for and I just cut my first sticker sheet thanks to you!
Yaaay! So happy to help Oscar!
I love this!! I really need this machine!
Hi! I noticed that you had 2 upper corner stickers in the hashed area. Did those print and cut properly? I’ve always thought that images for print and cut should not be placed not just outside the border lines but also in the hashed area. Is this not the case anymore?
I tried everything you said, and it only cut a line at the bottom of the page. Am I missing something? Why didn't it cut the actual stickers? How does the silhouette recognizes the actual stickers shape?
Can you laminate after printing and then cut them out in the portrait or cameo?
I have the portrait 1 and yes, you can. I use a holographic, self adhesive foil after printing. You need to adjust the blade, depth an pressure. It took me a moment to figure out the correct adjustments, but then it worked very well.
How do you add cutlines to the document if it doesnt already have them?
Hi there! You can also send an email in to mail@designbundles.net and they can check to see if the file has cut lines if you aren't sure! - Dawn
Keeps saying registrations failed😮
what are the blade settings for kiss cut with lamination and also without lamination?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
Thank you for Silhouette tutorial! Too fast!!
You're welcome! We appreciate your feedback!
Only reason I hit the dislike button is that I can barely hear you in any of the videos : (
Our apologies, we appreciate your feedback!