DT-02 Speed Competition Update
Vložit
- čas přidán 26. 08. 2024
- Hello Everyone
A quick update for everyone that has entered the DT-02 Speed Competition showing their positions on the board.
A huge Thank You to everyone that has entered so far 👍
Looking forward to seeing some more names on the board in the future.
And a massive Thank You to everyone that is taking part in this RC community competition.
Peter
Thanks for the update, Peter! At least it's good to see my name at the top, even if it's only this once!!! 🤣🤣 I'm sure things will soon hot up! Great job from all who have entered so far - as Bob said, good luck to all involved and thanks again for being the organiser, Peter! 🙏😎🦫👍
It is a pleasure to be the host for this competition with a ready-to-go 1st prize up for grabs 👍
Maybe next time it will be a 1st 2nd 3rd prize to both classes 😝🤣😆
Great update buddy.
Been loving watching everyone's entries.
Bob's off the radar already, and Mark and Rob as hysterical as ever!
Great fun!
👍 👍 👍
I've reserved the bottom 2 lines for you and Wayne 😜😝😁
@@cw-01creations46
Cheeky!! 😝
We won't be at the bottom I hope mate.
I've got two bodies built for it, and have literally just this minute ordered a 19t pinion from flea bay..
Still waiting for Wayne and waynetta to be free for an evening to build it.
My 120amp hobby wing esc that we were going to use is hard wired onto a brushless motor in my RC10 ready for the time trials.
Is that esc you gave moo moo capable of running a 12 turn brushed motor do you think? 🤔
Was thinking of using that esc instead perhaps, but I'm not familiar with it's specifications/limits?
Going with the 23 turn superstock RZ first, then Moos 15 turn, and finally the 12 turn one we have..... potentially then maybe increasing to a 22t pinion for a final attempt.
We will be late to the party as always, but hopefully should provide some entertainment with our convertible holiday buggy driven by Mr Hanky the speed run poo! 💩 😂
👍 👍 👍
@@yodadarksideGreenHawksRC As Churchill would say, "Oh Yes". The ESC I donated to you will take an 11t minimum brushed motor and is 2s/3s compatible so you are all good to go with that puppy 👍
That brand name is OCDay and I've got a few brushed and brushless set-ups from that company. The ESC is the same as the Hobbywing 1060 so I know its a tried and tested unit that does the job you want it to do.
I run all of my 15t cars on that ESC and I've got a proper fast jobby using a 12t brushed on that particular ESC as well. Like I say, tried and tested. I can swap it for a Hobbywing if you would prefer that, brand new in a box, still got the Cellophane on it with a deans plug.
I wouldn't give you any Micky Mouse shit as its what I use for all of my builds ✌️
@@cw-01creations46
Ah that's perfect for the job then mate! Cheers. 👍
Im just trying to work out our plan of attack/set up ahead of the build.
Obviously the ESC is at their place and I didn't know anything about it, or know it's name to be able to do any research into it's specifications!
Wanted to put an ESC in the car that would handle all three planned motors nicely..... sounds like this will work a treat. Nice one!
We will go with that then, and then once we've finished the time trials I will install it in moo moos mad bull for her. 👍 👍 👍 😊
Awesome, I am only third slowest overall, ha ha! Lots of nice CZcams videos, this contest has generated, I am having lots of fun with this, especially those long ones from McMark and McRob!
At least you're in the Top 3 👍😷😄
Hey I think you should just send the brushless prize to Bob now 🤣 I can't imagine anyone beating him but then who knows? Also Mark McBryan streets ahead of the competition but there's a long way to go. Thanks for the update Peter 😁
I was thinking about sending one to Bob whilst uploading this and then I thought that you might have another crack of the whip to be a worthy contender as I can't win my own competition but I'll have a bloody good go at it to see what can be achieved from the standard spur gear in the gearbox. If 3D printing were allowed, our names would be at the bottom of that list and we Brits can't be having any of that nonsense now, can we?
It's got to be a fully progrmmed ESC, 22t pinion and 6600kv or 7700kv brushless setup to get into the 70's+ mph range with some sort of wheelie bar so it doesn't flip over when you give it the full beans 🤔 🤔🤔 somewhere in that region at least to be in with a chance and a clear road that stretches as far as the eye can see with no real cars on it might help as well.
That just leaves the motorway during roadworks season 😜😝😆
Nice work everyone, iv been doing some tweaking this afternoon on my holiday buggy... will be able to crash much faster now 😂
Thank You for taking part in this competition 👍
I think the motto is :
Drive It, Crash It, Repair It, Repeat...
@RCMadUK Dude, thanks for the sub & got ya back mate
@@UncleBobsRC cheers mate, thats an impressive speed you got there 😁nice work 👍🏻
Great update 😊 Who's going to break 40 in brushed and 50 in brushless ? 🤔🤝
Not me 😂😂😂😂
I think both leaders will do it with tricks up their sleeves 👍
@coygtrc
All we are likely to break will be the car if our previous speed runs are anything to go by!! 😂 😅🤣
So far, so good... Good Luck Everybody!!!!!!
Bob, You Are smashing it in 1st place with your brushless set-up and I would like to Thank You for taking part in this competition 👍👍👍
@@cw-01creations46 I have no life, I'm retired, don't go out... LOL
@@cw-01creations46 No worries mate, win or lose, I'm in it for the fun of it...
@@UncleBobsRC I'm looking forward to retiring so I will have lots of spare time to finally get out and film stuff instead of it being one day a week 😝🤣😆
@@UncleBobsRC Just you wait until you're on full throttle.... then we will all be in trouble 😝😜😃
You've got to be in it to win it and you're winning it so far 🇺🇲
Loads of room for improvement...hopefully 😂😂😂
Plenty of time to get into the 30's Glenn 👍
@@cw-01creations46 it'll happen... 🤪🤪🤪
@@rivierarc That's the spirit and not the liquid type that runs through your veins 😝😜😆
Just seeing if a DT03 is legal since it’s almost the same as the dt02?
I have a dt03 but not a dt02.
@@MikeLouie_TKD Hi Mike, unfortunately not as the chassis is a different layout but Thank You for enquiring about it 👍