RC Lowrider SuperPump & GatePump Servo's
Vložit
- čas přidán 4. 01. 2023
- Here's a brief overview of the new Jevries True Hop SuperPump & GatePump RC Lowrider servo's and how to use them on your Redcat RC Lowrider.
The SuperPump servo is insanely fast with 0.039sec at 8.4V and designed for improved hopping while the GatePumps are made for Crazy fast pop and lock of the rear of your Redcat RC Lowrider.
Available at www.jevries.com
Both servo's are designed to use in combination with 10A BEC set at 8.4V and 3S Lipo battery. - Auta a dopravní prostředky
Thanks for sharing and showing everything in detail.
thank you for including the SuperPump and GatePump stickers with my last sticker pack order😁😁
Your welcome! We ran out of some other stickers but we thought you might like these.
Again amazing J😎
Leuk weer wat te zien en je Engels klinkt ook goed ik wens jullie beide een gelukkig Nieuw jaar en dat je vele auto,s mag verkopen Groetjes .
Dankjewel Koos!!👊🏼😎👍🏼
thats a lot of hop! very nice
Sweet video for sharing
Awesome video....
Great work 👊😎
Love it man love it. Just got to get some now 👍🔥👊💯💪🍺
Can't wait 2 get these on m.y rides
😳👍👍 freakin Jevries ! Nice !
Excellent Video, Thank You for all the tips and setup Jevries! Can't wait to get my 64 Impala hopping with the Super Pump Servo. Next up, the the rear Gate Pumps!
😎👍🏻HIT MEH!!!
Thanks bro! Will make more videos soon.
@@jevries And keep those Awesome New Jevries Products coming!
👊🏻😎
That’s awesome
I used the supergate for the front it works super good👌 for me
Good to hear bro!!👊🏼😎👊🏼
Jevries can you do a longer video an more info about all the mods you did an where to find the parts mainly the pump short linkage rod end ?!
What happened to the small hot wheel hoppers on your website?
How’s it going I’m new to the rc world I just bought the 79 Monte Carlo all stock what do I have to get for it to hop like the one on your video?
So mainly at this point is to grind off the top tees of the draft shaft 😰😰also where it can get the short linkage rod ?!! I got in all my cars em reef’s 300’s but I do wan to try out this pumps !! I’m just seen that it have to do a few mods !! But great pumps 🔥🔥🔥🔥
Drive shaft mod is really important. I used a piece of M3 threaded rod and cut at 35mm.
@@jevries geat thanks for the info is goin to help me a lot 👌🏻😎I’m goin for your pump 🔥🔥
Hey man where did u get your servos from
Is there any issues with making the cars heavier so the it doesn’t look so much like a toy when it bounces ?
This video is ONLY to show the performance of both the SuperPump and GatePumps without any added weight. To make it bounc realistic you will need to work with small weights in the back and if you like on the front.
Does anybody know where I can buy sixty four lights RER15639?
I had a question I had messaged you on another site but thought I would try to get you here I'm trying to make interior for mine and you have a 3D printed part that I seen for a pattern but it says it is for 1:24 scale do you make any for the 1/10 scale for cars like this
Hi, I have the 3D file for 1/10 scale button tuck interiors but still need to upload it to my website. I will ask today if they can make a page for it to download it for free.
@@jevries okay let me know where it will be available to purchase I will purchase it as soon as it is ready but I will need the actual item I do not have a printer or have any way of getting it printed
where do you get the short servo rod,I checked out Jeveries website and could not find any,did you customized your own,let me know the details so I can do that to my 64
I used a piece of threaded rod and cut to size.
@@jevries ok that makes sense thanks
Did you connect the bec straight to the stock speed controller red and black wires to the 3s battery?
I connect the BEC straight to receiver because it's capable of handling 8.4V. I cut the red wire of the stock ESC/ BEC.
Thank you for the response but having a blonde moment right now haha the black and red wires from the bec you attached them to red and black wires from the receiver that go to the battery connector correct.?
what specific drive shaft are you using on this car i cant find it?
I use the YEAHRUN driveshaft 60-80mm on Aliexpress.
Where did you get the aluminum drive shaft from ?
I use one that's made by YEAH RUN available on Aliexpress.
@@jevries ok thank you jevries
Amazing....What is the price?
$199.99 shipping Inc.
When will they come back in stock?
Today.
Does the 10a bec affect the steering servo?
Not so far but too be honest those aren't the best steering servo's in there.
@@jevries do you think going to an 8v steering servo is worth it?
@@505FlingerofFlies If you upgraded your setup already than I say yes.
@@jevries thanks for the advise.
Where can I buy the battery ?
I use the Gens Ace batteries. You can buy those driectly from them online.
Firme
👊🏼😎👊🏼
instead of slamming your frame. it gots different shocks heavy duty
This video shows the bare servo/ battery setup without any addtional weight. I def advise to balnce the car and use appropriate shocks.
You sell them ready to go
You wired the BEC wrong 😂 You need a BEC Bypass splitter Holmes Hobbies sells them and you dont need to shave your driveshaft if you use a Hobbywing esc programmed right Youre welcome
There are two ways to wire the BEC my friend and as you can see it works wonderfully well as the receiver can handle 8.4V without an issue. This is the stock chasis that doesn't come with the Hobbywing ESC. But please share your info on how to set the Hobbywing ESC it will be great info for the RC Lowrider community.
@@jevries the castle bec instructions do say to do that but thats before Holmee Hobbies created the Bypass Adapter which prevents you from cutting any wires and possibly damaging your rc It only costs $7.99 us dollars to do it properly and avail on Amain website or ebay (Im not Sponsored) My hobby store refused to cut that wire So thats when I looked into it with RC Crawler world and found Holmes Hobbies Hope this helps, Im uploading the video now and In exchange I ask can you please drop a 57 so I can make a rc Space Coupe 😁👊
I think they look out of scale with the servos over powered like that. (Too fast) keep it slow and low 💯
Over powered is the starting point, from there you fine tune. This video is to show the power of the servo's not hopping realism.
Mine hops like a real car on stock servo programmed to full power It hangs like a real lowrider its on my ig
Man everything is sold out
Nope, www.jevries.com
@@jevries I don't get it there's no cars
@@agee956 www.jevries.com/collections/rc-lowrider-cars