The Toxicant system is almost perfect 😭 First of all the rail slots are thinner than real spec so if you want to put on real spec rails you need file the rail 1 or 2mm to put it on. Secondly the bolt catch/ bolt release divot on the receiver is smaller than real spec so you can’t put a aftermarket PMM BCD on. Which is big sad🥲 Other than that a lot of the inner components are MWS spec like nozzle, nozzle retainer, sear, mag release, bolt release, fire selector ext. The hop up adjustment unit they give you has a longer screw hole, so if you want to change that part make sure to get a shorter screw🧐 Anyways, I hope this is useful🙏🏻 Love your content 🫶🏻🫶🏻🫶🏻
I also highly recommend thread locking the grub screws on the gas adjuster and on the *right side selector* (a lot of people including myself have already lost it🥲🥲🥲, the right side selector just fell off one day😭)
@@ottiesnorro Most definitely👍🏻 But many companies are coming up with their own take on the MWS MCX such as Artisan and BJ Tac, There's also the GBLS one. Even Toxicant is coming out with 20+ different new models like the Spear LT and "Thick boy" Spear as well. So I recommend holding off on buying MCXs for now if you haven't, wait till there are more options on the market, Then do some research before buying any of em
@@cliffford_1284 true! I allready am aware about the Artisan model. Yet, they only ship the needes externals and short-bolt. You need to buy all other internal parts loose, or take down a whole MWS model, to build the Rattler they deliver. And looking at prices, that makes it around a 1200-1300 euro replica. So this one is a bit more interesting. And since I now know its on TM-spec with internals, well, can't go wrong there.
Hi James, I’ve owed 3 different variants from Toxicant, a couple things to note. 1- when build it make sure you loctite the screw that hold the hop adjuster to the outer barrel! If you don’t your hop wheel will snap from the recoil working it loose! 2- the stock spring set in the trigger group is abysmal, shot full auto randomly. had to change all 3 of mine for a full set of GM trigger group springs after 1 game. Apart from that the RIF is amazing! Unfortunately I sold all 3 of mine 7 months later due to a lack of spares being available at the time for the proprietary parts. Fun fact the upper and lowers can be mixed and work between the rattler and the virtus models. However rails cannot be changed on them for any other MCX unless modifications are done.
I have pre-ordered theTOXICANT SPEAR LT - THE FIRST BATCH OF PRE-ORDERS HAS BEEN CLOSED, AND NOW THE PRE-ORDERS WILL BE SHIPPED IN THE MIDDLE AND LATE JANUARY.
Great vid... And what about the double eagle mags, are they compatible. I find them solid and unfortunately they do not enter the MWS magwell. Keep up the good work
James, what I would really like to know, eventually, is how compatible it actually is to MWS TM parts(or upgrades if needed). I have seen info that it is offspec to MWS parts.....
Do you ever have any feeding issues with your glock extended magazines for the lambda and apc9? Care to do a video explaining fixes for feeding issues if so? The guns are amazing pieces or work but the magazines never feed properly so they are hard to skirmish
I’m wanting the Toxicant MCX kit, but just wondering do I have to buy a full TM MWS also, or could I just get the hop and inner barrel unit from a MWS? TIA
Its all explained in the video. All you need is an inner barrel to complete it (not including external accessories). The video in the series should be going up tomorrow which shows what needs to be done.
Got to the point where I check this channel 3 times a day praying for new videos. Keep up the amazing content
The Toxicant system is almost perfect 😭
First of all the rail slots are thinner than real spec so if you want to put on real spec rails you need file the rail 1 or 2mm to put it on.
Secondly the bolt catch/ bolt release divot on the receiver is smaller than real spec so you can’t put a aftermarket PMM BCD on.
Which is big sad🥲
Other than that a lot of the inner components are MWS spec like nozzle, nozzle retainer, sear, mag release, bolt release, fire selector ext.
The hop up adjustment unit they give you has a longer screw hole, so if you want to change that part make sure to get a shorter screw🧐
Anyways, I hope this is useful🙏🏻 Love your content 🫶🏻🫶🏻🫶🏻
I also highly recommend thread locking the grub screws on the gas adjuster and on the *right side selector*
(a lot of people including myself have already lost it🥲🥲🥲, the right side selector just fell off one day😭)
Still, would you recommend it to someone who wwant a MWS-spec Rattler? In this case, me :)
@@ottiesnorro
Most definitely👍🏻
But many companies are coming up with their own take on the MWS MCX such as Artisan and BJ Tac,
There's also the GBLS one.
Even Toxicant is coming out with 20+ different new models like the Spear LT and "Thick boy" Spear as well.
So I recommend holding off on buying MCXs for now if you haven't, wait till there are more options on the market, Then do some research before buying any of em
@@cliffford_1284 true! I allready am aware about the Artisan model. Yet, they only ship the needes externals and short-bolt. You need to buy all other internal parts loose, or take down a whole MWS model, to build the Rattler they deliver. And looking at prices, that makes it around a 1200-1300 euro replica. So this one is a bit more interesting. And since I now know its on TM-spec with internals, well, can't go wrong there.
Hi James, I’ve owed 3 different variants from Toxicant, a couple things to note.
1- when build it make sure you loctite the screw that hold the hop adjuster to the outer barrel! If you don’t your hop wheel will snap from the recoil working it loose!
2- the stock spring set in the trigger group is abysmal, shot full auto randomly. had to change all 3 of mine for a full set of GM trigger group springs after 1 game.
Apart from that the RIF is amazing! Unfortunately I sold all 3 of mine 7 months later due to a lack of spares being available at the time for the proprietary parts.
Fun fact the upper and lowers can be mixed and work between the rattler and the virtus models. However rails cannot be changed on them for any other MCX unless modifications are done.
Ya know it is a good day when Jaeger starts a new MWS project 🤝🏽❤️
Oh my god man!... You're gonna bankrupt me! That thang looks awesome!
I just received mine toxicant mws Type A cerakote grey . good quality and performance same as tm mws
I have pre-ordered theTOXICANT SPEAR LT - THE FIRST BATCH OF PRE-ORDERS HAS BEEN CLOSED, AND NOW THE PRE-ORDERS WILL BE SHIPPED IN THE MIDDLE AND LATE JANUARY.
Ive ordered the Spear LT also last night. Where did they post pre-order times?
@@Jaeger-PrecisionRest assured, your order will be sent out in the first preorder.Remember to provide the UKARA number😅
@Toxicantairsoft thanks! You should have it from this order. If not ive just sent it over to the email address. Thanks again!
toxicant MCX的 BOLT 是使用不鏽鋼材質的 沒有磁性🤪
I have ordered the spear lt kit. can't wait😍
Ohh pdw stock just in time for my next build 😍 that mcx kit looks phenomenal 😢😮
This is the Gbbr pawn i needed
Gorgeous kit!! Sadly I can't find one available, ah well skint anyway...
Great video!
i see the charging handle comes with it dang. that is epic!! thanks if you know if they possibly sell them seperate let me know cheers mate
I just asked toxicant and they say the bolt is stainless steel and the trigger box too
Great vid... And what about the double eagle mags, are they compatible. I find them solid and unfortunately they do not enter the MWS magwell. Keep up the good work
James, what I would really like to know, eventually, is how compatible it actually is to MWS TM parts(or upgrades if needed).
I have seen info that it is offspec to MWS parts.....
Hi there!!
where did you buy the toxicant kit/or put here the link please?
Thanks
Merry Christmas!!
Looks great, would love to get one in the future. Question, do you have any plans for a new production run of your TM AKM/AKX valve set?
Yes more coming soon
@@Jaeger-PrecisionGreat to hear, Thanks.
great video! Any idea what length does the inner barrel has to be? 133mm?
So how does this work? Is it a working shooting gun at base or does it require more parts to work?
If you watch the video all the information is there.
Do you ever have any feeding issues with your glock extended magazines for the lambda and apc9? Care to do a video explaining fixes for feeding issues if so? The guns are amazing pieces or work but the magazines never feed properly so they are hard to skirmish
this is quality
Did you get a hop lever in your set?? Just got mine and it didnt have one, just want to make sure before i send an email 😂
Question does it have adjustable fps ? because i want one but in italy only 1j
Ill be doing more videos on it soon
cant wait @@Jaeger-Precision
I wonder what is the FPS of this rattler out of the box? Thinking of getting one myself and hoping it stays within 350fps or lower.
I’m wanting the Toxicant MCX kit, but just wondering do I have to buy a full TM MWS also, or could I just get the hop and inner barrel unit from a MWS? TIA
Its all explained in the video. All you need is an inner barrel to complete it (not including external accessories). The video in the series should be going up tomorrow which shows what needs to be done.
@@Jaeger-Precision only inner barrel? Even better, I thought you mentioned in the video you need the hop up too! Thanks for the reply!
@justsomeguy755 no a hop up is included. Probably not as clean as a TM one but its there and useable
How does an American get one? I have real one I need this though!
How was the delivery of this into the UK? Did you get any custom snafus?
Perfect. No charges and super fast delivery
Are u able to put a normal mcx hand guard on this
Are u able to put a normal mcx hand guard on this