The valves give lot of power. The only thing is you only get a few shot. Like 10 if you use a regulator then the power will drop to a more usable speed and you can get more consistent speeds. But if your only looking for power. You should be able to achieve the power your looking for or even more then you want. I'll try to make a few more videos when the weather allows me. Thanks for leaving a comment.
I have the 2240XL coming in soon and am looking into some upgrades so it can go over 500-600 fps. It still amazes me how much power one can get from these cheaper starter pistols.😎🇺🇸
Co2 will only give you some much power. The most power i ever got from a 2240 was close to 500+ fps with a 13inch barrel. To get power you will need to convert to pcp
@@airgunsofidaho4886 I am already looking into that option after I have some. target fun indoors first. What would you recommend I start off with where I can reach 700 fps and get around 30-40 shots between refills? So many options and I am trying too avoid going down the money rabbit hole. Much appreciated.
Cool gun. I was able to to get my 2240 to shoot 940 fps. I duplicated the one air velocity built. It took a few months and good chunk of money lol . The pellets I used where 14.3 gr.
BRIAN I changed the valve to a max flow valve. I put a Dan cothran cooking system on it to. Open the port a little. Raised the regulator to 1500 . It has a 18and a half in barrel.
@@matthewsandoval5931 and that got you over 900 ft per second? I have pretty much identically the same setup minus the cocking set up and I'm running a 14" barrel with a 13 ci HPA bottle and I'm only cracking barely 800.
This is VERY cool ! Maybe next time explain why you have the fishing line attached to the regulator. I know it is for removal because once it's in, it's nearly impossible to remove without a string attached.
And I like your videos bcuz I can friggin understand wth you are saying and doing without straining any gray matter...you really are about the most articulate of the channels I look at. You and Denny Mckinsey are about the best speakers on any airgun channel and ol boy here will get better when he stops repeating that one word!...." Basically ".. lol..
From my understanding of airguns alot of power can be easily made no matter how long or short the barrel as long as you're willing to it lose a lot of air doing it. And probably definitely the reason why you able to lessen the power by half by using a regulator because of that restricting the air from escaping out each shot. I've got a regulator to put into my Maximus I have not installed it yet and I'm not really concerned about maximum power has more as maximum consistency.
I am just waiting for my press and diys. I can make .177 slugs but only 15gr slugs when I get the press. I should be all to make 12 - 22gn or maybe 24gn
Hi , why did you not just cut the barrel to your 14 " L. and then cut your air tube to the length you wanted and then re-thread your air tube for your end plug and fill fitting . It would of been a lot easier and a lot cheaper . Did you say you are using CO-2 in it ? I did like your idea and video :=} .
How accurate are they tho to much power can drastically affect accuracy due to many factors be cool to see some target work at about 80 yards if ur can 👍
I only get 3-4 shots from this air pistol on high power. The groups are pretty good for a high power pistol. With the huma reg I get about 10 shots and the accuracy is a little bit better. It's a very fun gun to shot.
Thanks for the reply plus I've just found a benjamin marauder rifle main tube with the power valve and gauge system and hammer what modifications would I need to do to it and would the crosman 2250xl trigger frame and steel breech fit or would it need modifying to fit ?
@@eddiehughes9137 you need a Benjamin marauder Gen 1 air tube. The 2240 trigger well work but you would still need a breech screw on the breech to hold it.
No. I only build a few air gun for myself. Its to expensive to be build airguns. You can get much better airguns for the price. I think I expend 550 -600 dollars on this pistol. The airforce talon p is only $450 and a much better airguns.
He is not getting 40 fpe. From this gun. Why doesn't he prove it buy showing crony testing. He never does. He thinks wrongly that a longer barrel will increase power drastically. He can waste all the money he wants he needs to prove it and he cant
Love the high power small bore stuff! Just got a powerhouse for one of my Marauders. I can't wait to see the fpe it makes!
I want to power mod my maximus! I'd love to see a video on your hybrid rifle
The valves give lot of power. The only thing is you only get a few shot. Like 10 if you use a regulator then the power will drop to a more usable speed and you can get more consistent speeds. But if your only looking for power. You should be able to achieve the power your looking for or even more then you want. I'll try to make a few more videos when the weather allows me. Thanks for leaving a comment.
Imagine spending 700 dollars on an airgun when a 10/22 is 400
Wow, if you chambered the long barrel in 5.5 you wud get darn near 22 rimfire
I have the 2240XL coming in soon and am looking into some upgrades so it can go over 500-600 fps. It still amazes me how much power one can get from these cheaper starter pistols.😎🇺🇸
Co2 will only give you some much power. The most power i ever got from a 2240 was close to 500+ fps with a 13inch barrel. To get power you will need to convert to pcp
@@airgunsofidaho4886
I am already looking into that option after I have some. target fun indoors first.
What would you recommend I start off with where I can reach 700 fps and get around 30-40 shots between refills?
So many options and I am trying too avoid going down the money rabbit hole.
Much appreciated.
I have a champagne taste but live on a beer 🍻 budget.🤣
I have a 2240 i build a few months ago. I'll make a video on it here soon and hopefully it helps you out.
@@johnnybbgunner2136 it's doing 700 fps with crosman domes 14.3gn and gives me 30 regulator shots. 3000 psi to 1500 fps
Cool gun. I was able to to get my 2240 to shoot 940 fps. I duplicated the one air velocity built. It took a few months and good chunk of money lol . The pellets I used where 14.3 gr.
That's awesome. I'm also using the 14.3 crosman domes @ 860 or 880 fps.
How did you set it up
BRIAN I changed the valve to a max flow valve. I put a Dan cothran cooking system on it to. Open the port a little. Raised the regulator to 1500 . It has a 18and a half in barrel.
@@matthewsandoval5931 and that got you over 900 ft per second? I have pretty much identically the same setup minus the cocking set up and I'm running a 14" barrel with a 13 ci HPA bottle and I'm only cracking barely 800.
@@That1E_K1129 Mybe the hammer spring is not strong enough?
This is VERY cool !
Maybe next time explain why you have the fishing line attached to the regulator. I know it is for removal because once it's in, it's nearly impossible to remove without a string attached.
Thanks
Great video like always
Keep up the Good work.. 😎
Thanks bro
Nice looking gun, nice job. Congratulations.
Unit mini yang bagus, Saya punya buatan sendiri laras pendek cal.177, tabung penyimpanan angin pipa od 25 dapat diisi 2500psi, bisa untuk 15 x tembak.
Great job Lewis I wish I had the cajones to take apart my gun like that and experiment but I just don't trust my skills amazing
@@timmy4539 hahahahah😂😂😄😂 you better!!
And I like your videos bcuz I can friggin understand wth you are saying and doing without straining any gray matter...you really are about the most articulate of the channels I look at. You and Denny Mckinsey are about the best speakers on any airgun channel and ol boy here will get better when he stops repeating that one word!...." Basically ".. lol..
@@gwhitfield4239 💯💯👍👍😁😁
Dinosaur slayer .gun .or tooth pick. Best
Such few shots though. I like the bottle gun conversions a little better for that reason...
Excelente video amigo felicidades
Thanks
Great tutorial
Thanks
You are the best!
Good job and а great video! Can you tell us more about the valve? Is it homemade or commercially available?
bro that 177 is insane. tofazfou ( I know I butchered his name) has what he calls the 17 HMAir
Could you give more detail on air tube machinists work
Hell of a build! Love it.
From my understanding of airguns alot of power can be easily made no matter how long or short the barrel as long as you're willing to it lose a lot of air doing it. And probably definitely the reason why you able to lessen the power by half by using a regulator because of that restricting the air from escaping out each shot.
I've got a regulator to put into my Maximus I have not installed it yet and I'm not really concerned about maximum power has more as maximum consistency.
👍
Oh yay, please make those 24g .177 slugs.. my .177 Neutron Star is begging for them..
I am just waiting for my press and diys. I can make .177 slugs but only 15gr slugs when I get the press. I should be all to make 12 - 22gn or maybe 24gn
Hey Luis what kinda valve is it , and what was the fill probe from?
Hi , why did you not just cut the barrel to your 14 " L. and then cut your air tube to the length you wanted and then re-thread your air tube for your end plug and fill fitting .
It would of been a lot easier and a lot cheaper .
Did you say you are using CO-2 in it ?
I did like your idea and video :=} .
Can see..70 ftlbs in 177 is outstanding.
it a duce duce
Lol
So I'm guessing it's now PCP rather than CO2?
Since nobody answered u , yes sir ..turns it into a PCP
@@randyhardy3692 Thanks.
Pretty cool,havn't seen a valve like that before where you get it? I need one🤔
Would an extension to the original tube be as effective as the machined tube that you have on there?
I'm not sure. But those co2 2240 high pack aren't safe.
👋🏾sup bruh good job brudda 👊🏾😎
Thanks
good job
I have heard these can fail. Think there are vids on here. Too few shots for me.
👍👍👍
Sweet gun! Where can I buy one like this?
130 bar is 1885psi. The tube handles 2000psi. You'll be off the reg after a few shots.
250bar working pressure on this bad boy.
@@airgunsofidaho4886 What tube and valve retaining screws are you using?
Like you're videos! We're did you buy that left handed breach
From ebay or Amazon
@@airgunsofidaho4886 OK Thanks ,
Nice!!!!!
Thanks for watching mitch
How accurate are they tho to much power can drastically affect accuracy due to many factors be cool to see some target work at about 80 yards if ur can 👍
I only get 3-4 shots from this air pistol on high power. The groups are pretty good for a high power pistol. With the huma reg I get about 10 shots and the accuracy is a little bit better. It's a very fun gun to shot.
What pellet weight or slug and how fast?
Loving the build buddy.
Would you get the same results with a Benjamin marauder in .22?
You could probably get 30 foot pounds from the Benjamin marauder pistol with alot of modifications.
Thanks for the reply plus I've just found a benjamin marauder rifle main tube with the power valve and gauge system and hammer what modifications would I need to do to it and would the crosman 2250xl trigger frame and steel breech fit or would it need modifying to fit ?
@@eddiehughes9137 you need a Benjamin marauder Gen 1 air tube. The 2240 trigger well work but you would still need a breech screw on the breech to hold it.
Look what Q has send to Bond for Thanksgiving.
Can't wait to see that .177! You going to put in a stock?
Yup. This is a benjamin maximus with a few modifications.
Do you have a link for the high packs?
Do you make these costum for people and if not have you put any thought in it ?
I only make my custom airguns for my self. It's to much work to build one and it's not cheap. This little thing came out to about 600 bucks 😳
This is a High power air pistol. I only get about 3 good shots per fill.
Great gun basically 😂
Could you build one for me, $$$
Where can we buy the parts
漂亮
Crony test?
Bro. My co2 builds pop louder than that on the first click. It don't mean anything. There's NO WAY you're getting 40 ft lbs from that gun.
Probably does, 1 shot using 2000psi lol
He said it's using co2 he cant prove the power level because it's not possible
Lol that's exactly what it was doing at the beginning. transfer Port was leaking and didn't let the valve close right.
Tube is a bit weak me thinks drinking rights ftibs no chrony ?
Thanks for watching
@@airgunsofidaho4886 this guy is dreaming. Co2 can't produce 40 fpe not in a million years
Why not show an actual field test to prove what you're saying is legit?
Sounds like you're just throwing out random high numbers with no proof.
Are you building pistols?
No. I only build a few air gun for myself. Its to expensive to be build airguns. You can get much better airguns for the price. I think I expend 550 -600 dollars on this pistol. The airforce talon p is only $450 and a much better airguns.
Simpler to Buy a 22 pistol
No freaking way that a.177 cal is going to shoot 70 ftlbs of energy. I call b.s. just as there's no way that 22 cal will shoot 40 ftlbs.
Only one comment on my channel and its a negative one. Dang
If you are i have a stock 2240 that i want on hpa
If you do what to build a 2240 hp. I can tell you where to get the parts. It might be cheap them my build.
@@airgunsofidaho4886 ok
@@airgunsofidaho4886 I also would like to build my 2240 up these specs. Can you sent me a parts list and where to get them from?
He is not getting 40 fpe. From this gun. Why doesn't he prove it buy showing crony testing. He never does. He thinks wrongly that a longer barrel will increase power drastically. He can waste all the money he wants he needs to prove it and he cant
Hi, what sight are you using ?
Yeah! There is no field test to prove it.