Looking very good,I have always liked tractors ever since I was 5, so I am looking forward to seeing your continued build/restoration of your tractor cheers till then 👍👍🇦🇺
U should've used a drill W a wire wheel 2 clean the cylinder head it would've much faster and it upside level take a straight edge and a feeler gauge 2 check it see if the feeler will go under the straight edge if it does the cylinder head will have 2 be shaved at a machine shop U should relax the valves 2 while U have the cylinder head off the engine and when U relax the valves it make a difference in the engine better compression 😊😊 OMG 8 3O 2O23
Thanks for the tip. I used steel wool because a lot of people seem to disagree with using a wire wheel on the cylinder head. Besides, I didn’t have a wire wheel for the drill but I did have steel wool. I did check the head with a straight edge off camera, it was perfectly flat
Bom DIA tive uma conversa com Davi nosso senhor nosso Deus me disse. QUE PODERIA A PLANTAR O GRÃO QUE SERIA DE SEMENTE......SÓ DAS MÁQUINAS QUE TIVE QUE ERA MINHA.....NÃO É PARA PEGAR DE NINGUÉM.....SE EU QUERE SOBREVIVER COM A MINHA FAMÍLIA.....SE OS ARTISTAS VENDER SERIA ROUBO ....UMAS DAS LEIS SEVERAS DE DEUS QIE É ....NÃO FURTARAS
U can take the starter 2 /2 a st!rter shop and have it rebuilt and the exhaust manifold I would weld it up U can do that yourself if it wasn't worth fixing only then I would put another exhaust manifold on 😊😊 OMG 8 3O 2O23
Thanks for watching! At the time I thought the manifold was cast iron that’s why I replaced it. The starter was pretty torn up so I found a different one.
Looking very good,I have always liked tractors ever since I was 5, so I am looking forward to seeing your continued build/restoration of your tractor cheers till then 👍👍🇦🇺
Thank you! I’ve always liked tractors too although before I was six I was more interested in construction equipment.
Nice poney. Gonna look better when it it completely restored.
Thanks for watching. Yes, it definitely looks a lot better now that it’s almost done
my MH Pony 812 is from 1957
U should've used a drill W a wire wheel 2 clean the cylinder head it would've much faster and it upside level take a straight edge and a feeler gauge 2 check it see if the feeler will go under the straight edge if it does the cylinder head will have 2 be shaved at a machine shop U should relax the valves 2 while U have the cylinder head off the engine and when U relax the valves it make a difference in the engine better compression 😊😊 OMG 8 3O 2O23
Thanks for the tip. I used steel wool because a lot of people seem to disagree with using a wire wheel on the cylinder head. Besides, I didn’t have a wire wheel for the drill but I did have steel wool. I did check the head with a straight edge off camera, it was perfectly flat
the fly wheel should have a timing mark in it a dot or a line 4 tooth on the fly wheel that's your timing mark 😊😊 OMG 8 3O 2O23
Presumably it does but I didn’t notice it. I haven’t adjusted the timing yet but for the moment it runs fine
Bom DIA tive uma conversa com Davi nosso senhor nosso Deus me disse. QUE PODERIA A PLANTAR O GRÃO QUE SERIA DE SEMENTE......SÓ DAS MÁQUINAS QUE TIVE QUE ERA MINHA.....NÃO É PARA PEGAR DE NINGUÉM.....SE EU QUERE SOBREVIVER COM A MINHA FAMÍLIA.....SE OS ARTISTAS VENDER SERIA ROUBO ....UMAS DAS LEIS SEVERAS DE DEUS QIE É ....NÃO FURTARAS
U can take the starter 2 /2 a st!rter shop and have it rebuilt and the exhaust manifold I would weld it up U can do that yourself if it wasn't worth fixing only then I would put another exhaust manifold on 😊😊 OMG 8 3O 2O23
Thanks for watching! At the time I thought the manifold was cast iron that’s why I replaced it. The starter was pretty torn up so I found a different one.