Fix Sore Knees, Back Pain, Numb Hands!! How To Perform a FULL BIKE FIT At Home! w/Phil Burt!
VloĆŸit
- Äas pĆidĂĄn 23. 07. 2024
- The genius and master bike fitter, Phil Burt, gives all his tips and tricks for the perfect bike fit at home / on your turbo :)
0:00 Intro
0:28 Who can benefit from a bike fit?
1:28 The PERFECT saddle height!
3:33 Saddle tilt, and problems if not correct!
4:44 Determining your ideal handlebar width.
6:28 Crank length & your height....
10:01 Zwift / Turbo set up tips
12:32 Outtakes! đ
Any questions about bike fit, ask them in the comments and Phil and myself will film more videos.
Phil's details here: www.philburtinnovation.co.uk
Oh and enjoy the outtakes! There were so many I couldn't include them all hahaha! :)
Thanks again to Zwift for partnering with me for this Level Up series!
// Cycling eBook: www.ilikemountains.cc/s-h-o-p
// Instagram: / katiekookaburra1
// Strava: / strava
// Bikes: www.ribblecycles.co.uk
// Patreon: / katiekookaburra
Well chuffed to have the following brands support me and my ol' cycling adventures. So you will see some of their products I choose to use in my content :)
www.ribblecycles.co.uk/
www.shimano.com/en/
www.zwift.com/uk
www.michelin.co.uk/
www.lazersport.co.uk/
www.strava.com
exposurelights.com/
www.quadlockcase.co.uk
www.squirtcyclingproducts.com
I absolutely loved this video. Very very informative, full of information and well explained. I have now measured and set up my 13 year old Trek, I never had a proper bike fit when I bought it and it feels much better already. I'm 6'5 and 115kgs (at the moment). Thank you.
So glad I subscribed to your page , I've recently brought myself a giant defy advance 2 and have been suffering knee pain and thanks to you and Phil I have resolved my knee problems. Many thanks Katie,
Oh no! I need 165 cranks and they are sold out everywhere, now more people are going to want them too! Totally agree with the saddle height and handle bar width, solved all my problems. No more shoulder pain since moving to narrower bars and no more saddle pain since increasing my saddle height. I went to see Phil last week and he has helped a lot with my recovery from a broken foot I had last September. I now have the confidence to train as I know what is good pain and what is bad pain. He explained everything so well in an easy to understand way. It was worth every penny.
Experienced bike fitter here... three decades of setting up riders taught me that once the fundamentals are correct, saddle height, reach etc... Your posture on the bike can make a huge difference in efficiency and comfort. Also what are you doing off the bike, strength and flexibility can play a massive role in improving power. Shorter cranks make a difference but as a proportion of your overall inseam length not as much as folk think (unless you've got lordosis). Work on your hip flexors and hamstrings during stretching exercises and see the benefits when closing the hip angle at the top of the pedal stroke. One other tip is to throw away the insoles that came with your shoes and get some that offer more support.
Cyclists never want to do the work. That ÂŁ300 pair of shoes or ÂŁ500 power meter will fix the issues. Not a regime of core work and stretches that costs only time
I donât get the logic of crank length in terms pedal stroke if you can simply adjust the saddle height which is also cheaper to change.
Thanks, Gary R. You could haven't said it better myself. Phil Burt, thanks for the helpfull tips. I really need to check my saddle height again and he really made it more clear. Than me having to go back to the cycling shop for another fit, sometimes it's as simple as DIY. Cyclist really do take care for one another... Thanks. Happy Cycling and Happy New Year!!
@@uncleteej8414 longer crank length puts too much pressure on the knees. Sometimes shorter cranks are the solution for the knee pain after setting everything up.
Hi Gary,
Ideally I'd get a bike fit but due to costs atm, I'm looking online.
I'm an odd bod, with very wide shoulders, short legs and 100kg at 5 foot 8! My wrists always hurt and I can get cramps. I suspect it's because I'm fat and also have a poorly fitted bike. However I'm looking into it hehe. I'd probably be a nightmare for you :p
I've got an older touring bike that I absolutely love! I put it on an indoor trainer this winter and fiddled around with all these sane adjustments over a month. Now the old Miyata fits like a custom made glove!
Thanks so much for sharing this video..
Measured my inside leg as explained and I was too high in my saddle, only slightly. Used your method and dropped my seat. Switched onto 165 crank during the winter on my summer bike. Took it out for the first time since switching over and I canât believe the difference. I was quicker and felt so much comfortable. 165 cranks are definitely the way forward for me. Thanks again đ
If your knees are nearly locked out at the lowest point then you should keep the higher setup. Higher means more efficiency and better hill climbing and less hip thigh cramp
What worked for me 40 years ago needed adjustment. Aside from saddle height which still works, stem height and reach did need changing. Unexpectedly clip on Tri bars work very well for me once the stack height was dialed in. At first it didn't seem that I could use them. With a long process of small changes I arrived at a setting that was more comfortable than the drops or tops. Experimenting showed about 1mph gain with about the same effort in more comfort. No more sore hands, and more comfortable saddle as a bonus! Be patient, that allen key is your friend!
I have recently discovered mountain biking and absolutely love it. So naturally I was devastated when I developed quite severe knee pain bringing my trail riding to a halt. I did find riding trails with the seat lower feels better and allows you to shift your weight easily but not ideal for straight out riding but never actually connected seat position with knee pain. So now after seeing your video I now at lease I have hope that I can solve this problem. I think a dropper post would be a good investment!
Thank you so much for this video !!
Try a dropper post, so that you can lower your seat height while riding.
Thanks for the tips. I never considered using shorter cranks, lots to think about there. He didn't mention moving the levers higher and handlebar rotation. I see a lot of people with them adjusted poorly. Nice QuadLock mount, definitely the best.
Thanks Katie for bringing us Phil.
He is such a reservoir of knowledge and a true resource. Iâm 6â1â and started using 165 cranks in 2020 what a difference. My power increased and more comfort and less fatigue.
He is a blummin' genius! :)
I'm 6'4" .so kinda close to you. How do you calculate optimal crank length?
Eric itâs about opening up the hip angle between the torso and leg. The two ways I know are having a more up right position on the bike and or shorter crank length. Also bike geometry is a factor along with stem length and angle. My bike has a race geometry so my position is somewhat aggressive. I am comfortable in the aggressive position so I tried the shorter cranks and liked it especially in the drops.
I can see having shorter cranks making it easier to be in a more aggressive position (in the drops) because your leg is not as high at the top of the stroke.
My older bike came with 172.5 and my new one is 170. Makes a huge difference, I couldnât believe the difference in cadence right off the bat.
Switching from drop bars to flat bars on my old Touring bike made all the difference for me.
This is a fantastic resource into bike fit. Thank you for sharing!!
A superb video. Thank you so much for providing this essential content.
Just getting back into cycling at 48 after a good few years of none whatsoever! Some good tips here for me to look at and put right if necessary. Thank you.
I'm starting back at 56!
Same, at 62. First day my hands and wrists were on fire. But after a week of 30 minutes each morning, things much improved.
Ayup Ducky ... my top tip relates to Phil's comment about being in a fixed position for extended periods when on the turbo. Last year, my knees would on occasion get uncomfortable after riding on the road for 30 or 40 minutes straight. I discovered that simply getting off the bike and standing/walking for a few minutes would sort that issue for the remainder of the ride regardless of how long that would be. I'm imagining that tense leg muscles would cause the knee cap to be pulled off centre causing the discomfort. So ... when the same thing happens on the turbo now, I just ride out of the saddle for a minute or so to change my posture and that seems to have the same effect. Now I make a point of riding out of the saddle for short intervals whenever I'm on the turbo ... so far so good. Great video as always ... Hold Fast!
Great information. Heâs a good teacher. Thank you.
A great video. I have already made some small adjustments on my own bikes (road and gravel) that have made a difference to the comfort levels.
Another great vlog Katie ur just having so much fun
These videos are really helpful. Thanks Katie!
Seriously had no idea about the crank arm length! I am 6'5" and this is awesome!! Thank you!!! đ
Nice vid, thanks. Good, clear, common sense advice - love it!
Good tip about the crank length! Never thought about how it doesn't change the torque as long as you can have enough range in the gearing.
I went with 165 mm cranks, moved the seat back and got a shorter stem. Maintained a proper seat to pedal distance. Now my wrists feel better, my knees feel better and climbing is easier. Presumably because I incorporate more of my hamstrings and glutes in my pedal stroke.
Absolutely Brilliant Video!
amazing how the right fit makes the difference! In clothes, shoes, hats, helmets, and a road bike! Manayunk in Philadelphia PA USA has some great bike shops that care for competitive triathletes and bicyclists.
Although bike fits seem expensive, they're so worth it. Mine sorted out all the problems I was having and drastically improved my position on the bike
Thanks for the great tips!
Thanks for making this video as this is just what I needed. I have been struggling with comfort on the bike so I will take some of these tips away and start making some adjustments. I also suffer with numb feet and I have tried loosening my shoes, moving my cleats and position on the bike, but nothing seems to help. Hoping some of these suggestions will help!
I got new cranks 46/30 from 52/38. Originally got 175mm but new cranks were 170 (due supply chain) and honestly, even when 6,5" guy I would even pick 165mm now. Much more comfortable for body.
Thanks so much for this video Kate, Iâve been cycling for a year now and the general set up has always been a mystery to me, so itâs great to finally see a video with some knowledgeable insight.
I do think I need to take my Ribble R872 to a specialised bike fitter, to get myself set up 100%.
Ride safe
Glad it helped Gavin! Love the R872!! :)
i was just looking through videos on bike fittings. thanks!!
Thanks Katie, I really need this, my hands and knees especially.
I remember reading "Richard's Bicycle Book" that it's best to tilt the nose of the saddle pointed slightly down. This stops you sitting down in the saddle and stops you slouching and makes you more lined up with the whole bicycle.
a video on foot stability would be fascinating! Thanks Phil
Going from 170mm cranks to 165mm made a big difference for me. Would even try some 160mm if they were more available just to see how I like them.
Interesting, may I know your height?
Very informative. Comfort is the most overlooked aspect of cycling performance.
Hello Katie, thanks for this kind of content, in a future video, could you address the position of the saddle, further forward, further back, how to find this position.
Another question, which are the most advisable pedaling angles, regarding the hip, knee and ankle.
Thanks
Thanks for this very informative video đđ
Great video. Thank you so much.
Thanks Phil for sharing, brilliant advice đđ
Thanks for this. I am 1.80 metres tall and have been riding 172.5mm cranks on road and gravel since 1974 (my fixie has 165s to improve clearance when cornering). In recent years, I have noticed a tightness in my hips that really hampers my flexibility: I can no longer sit cross-legged. I think I shall have to see if I can find 165s. In the current commercial environment, however, that's going to be like trying to sled uphill.
I'm the same height and I switched to 165s on every bike. I haven't had any knee or hip pain since switching, and since I like to spin I appreciate the tighter circle as well.
Wouldn't addressing the cause be the common sense route to take? Ie. Stretching and working on improving flexibility? Sure adjust the equipment too. But for sure can't hurt to double down on the off the bike stuff as mentioned in the vid
@@TheFlowZoneX yeah, he could maybe try practicing the "asian squat" to increase flexibility. There are many youtube videos on how to get started on it.
Super helpful, thanks for sharing
This guy is the best. Really like these videos.
Absolutely fantastic information đđ€đœđŽđ»ââïž
Brilliant video!! Thank you.
Oooook yes I am going to take this video and try these fit tips. I get numbness on my right hand but I have not had any problems with my last rides.
After wanting to start cycling again after 10 years off my bike i am going for a cycle fit by a pro so I get it spot onđ€, just got a felt 5 with hunt wheels, from my brother who lives in Spain and does some insane hill rides like you lol, your I also quit cycling/youtube video I stumbled upon hit home as well as my brother nagging me!
Hi Katie, it is amazing Philâs Knowledge about bike fit. I have read his book about the theme and it is so broad. I lot to learn. As you mentioned in the video saddle height is crucial, thus how to measure it on the bike is key. I have never found his recommendation about it, should I mesure it from BB to which point of the saddle? Should I use120mm from the back, 80mm width point etc. it would be great to hear from him. Other question, is what should be the start point for the fore-after position? Both have direct impact in the height. Tks in advances and congrats from đ§đ·đ§đ·đ§đ·
All useful stuff from Phil, diva dancing in the outtakesđ€Łđ€Łđ€Ł.
Great video Katie đ
Thank you Phil! I'm on the other side of the atlantic so these tips will save me thousands of pounds!
excellent final words. thank you.
Great and straight forward video Katie. Would love to have someone address bar width for CX/MTB bars (not drop bars). They are substantially wider than drops, so the "shoulder width" doesnt work. Backsweep, Upsweep, Rise and width all play into preferences, but would be a very useful video! Thx
This is true, but the bar width is a less relevant factor in a MTB situation... Because your upper body is not supposed to be relatively static for hours at a time such as we experience on a road bike. Up and back sweep definitely need to be considered with your morphology taken into account, for wrist comfort more than anything, but primarily for power and control during technical sections
@@colinpuffett9819 it depends on the discipline. Endurance XC riding exist, i doubt that they don't have fitment considerations.
Wider handlebars are paired with shorter stems.
Touched on it indirectly with the crank link. But lets talk about stack height for cleats. If you use multiple styles of shoes you will have different stack heights. if you use one for the trainer, one for the road and another for gravel, you better ensure you have good #'s to confirm saddle height.
Steve Hogg on YT
@@pedallinraw thanks for the bread crumb. after 4 RAAMâs and several records. Just trying to help folks not build off a bad foundation.
Another great video!
what we learn today ... is that we might share or borrow KK's bike no problem at all since we apparently share the basic bike fit measurements, am not sold on crank length I've tried 3 different and am comfortable above 170 right now and is not about power generation issues. hrs in zwift techas you about a thing or two of bike fit and comfortability
Phil, can you do a video on DIY bike fit for taller riders...I'm 6' 4" too and interested on your insights
Brilliant job đđ
Simple and to the point. Great video....I'm now off to check the width of my handle bars as i get tingling after riding for a while đđ
I'm off to download a level for my phone. đ
Great information, thank you!
Glad it was helpful!
The still for this video, the position of Phil, title should be "Bike Fitting with Dr. Phil Butt...!"
On a more serious note, the guy is a genius and thanks for bringing him to the world's attention.
excellent explanations, love the video. He is a very good commentator.
Francis Cade has some great bike fit videos too, Thanks, Katie!
Phil from riding the dales. Good to see you are still at full tilt.
Phil knowledge is really great!!!
very good info...I have mild back soreness when riding in aero position over 4 hours....I have stock 172 cranks on my 56 cm tri and road bikes...FTP is 318...wonder if shorter cranks would help?...I qualified for Kona and won my age group at the 70.3 Worlds
I agree completely about the problems due to trainers being fixed. My trainer set up felt totally wrong until I got a rocker plate. It's still not completely realistic, but it is orders of magnitude better. I would highly recommend getting or making one for your trainer setup.
I kinda like the idea but they take up SO much room and if, like me, you have to assemble and dismantle your trainer set-up each time you use it, it's just not worth the hassle.
@@jonmathias6159 Agreed. I'm lucky that I can leave my setup undisturbed in my garage.
Excellent!! Thank you.
Great tips!
Fantastic video thankyou.
Phil is a total legend! Mmmmm crank length! 172.5 and 173cm... looks like I need shorter cranks!
Great Video thank you for posting!
Cheers Chris
Great video. Thank you
As someone who has skeletal issues, I'd like to see this explored more, I'm sure there are many others in the same boat.
Awesome info
Thanks for the video. I'm curious about handlebar height. Any advice there? How high? I feel my hands are supporting too much weight...like I'm too far leaned over.
Very good info Katie, I plan on buying a triathlon bike later this year. I will definitely get it fitted!!!đđŽââïž
Be aware tri or TT bikes are much different regarding positioning/fitting. Find someone that is experienced with TT fits.
I would say, see a bike fitter BEFORE getting a bike!
@@KatieKookaburra I will definitely do that Katie! đ„°
If I have correct width bars where would I be aiming for on reach is it better to have slight or more bent arms, I donât do a lot of riding but find my fingers going numb after a couple of miles, and at the moment when I do ride Iâm only covering about 12 miles so just like popping out to the shops for you guys, I also get numb in the saddle but have started getting further distance before this happens, if it makes a difference I do suffer from frozen shoulders and Iâm 58 a couple of stone over weight have I just got to push through this, in saying that about 20 years ago I rode motorcycles and got numb fingers/ hands then but shoulders were ok, and I used to work in the building game with heavy lifting and what ever it was that caused frozen shoulder the doc said it was irripairable ? If I tried to lift my arms it was if someone was holding them down as get pain in them but if I get injection of some kind of steroid they can be ok for years but one just started playing up again, sorry for the essay Iâm not asking for a diagnosis just to donât want to waste your time with you giving me good advise if I past being fixed, thanks enjoy the vids, take care
Excellent vid, certainly things I need to check on my bikes. Bar width - so can bar width be decided by holding them up to your shoulders to see if they're a good match? And what about straight bars? I'm pretty sure ours are too wide on our tandem, esp for my wife on the back. I don't want to get a hacksaw out for a cheap fix and find I need to glue a bit back on ;)
Most informative video. đ
Great videoâŠ. Everybody needs a Phil.
Other fitters are available if you are not in the North
Interesting video. My bike fitter in Spain has also long been advocating shorter crank lengths. Would have been good to hear about the for/aft position of the saddle. :)
Another video I feel :)
Good video,
Phil knows everything and keeps it simple , I rarely have any pain on the bike or off of it , and heres the but I have had numb hands , this has only happened since I started wearing a watch to record my ride. Always on the left hand , it can be both hands but always the watch hand first , its quite an interesting feeling as your hands turn to a blob, changing gears and so on becomes something to think about . I normally shake it out .. Its not a pain just an event .... Subject change ... the camera angle was a bit low at the end made it look like you were in a low ceiling cave , enjoy ,and thank you for brightening my bright day ..
This is so good
I want to try some shorter cranks. However I can see opening a can of worms doing it. Then you have to raise the saddle in turn raise the bars and then your sitting higher on the bike so how does it feel cornering, in the bike or on top of the bike ect. A bit nervous about it however I get lower back pain now so I may give it a try.
Does this fit apply to ccMTB? Lots of time out of the saddle and handle bars a good 10 inches wider than my shoulders.
My hands do progress inwards on longer smoother sections of my rides so guess that's the body trying to correct its position on its own.
Brilliant. Crammed with gems.
Question, the mathematical solution for this equates to the pedal centre to saddle centre distance in MM, after the inside leg measurement and x 0.883? Mine = 751?
THIS GUY IS GREAT!!
This is fantastic
And my saddle was too low... Thanks for sharing!
Thanks for this. I'm a newbie, and would like to ask if all this applies to MTB as well. Thanks!
A question for Phil. I've developed whinging scapula (right shoulder). Does cycling cause this? And if so- is this down to bike fit?
Very informative
Great video and tips Katie, in particular crank length (hmm I'm running 175mm...) but why is your seat post collar the wrong way around?!
Have you done a clip on MTB set up...
Eg handelbar lenth, I'm guessing the saddle hight remains a consistent & how do I know saddle width is right for me...
Magic informative clip
Dean
Very well done! Even a "Slow" person, me, understands!!
Thank you for this informative video! Loved it. I'm still a novice - riding a Titan sport M frame 29er mtb, been plaqued the past 2 months with pain in my tricep tendon area (just above my elbow) when riding (even on tar!). Adjusted seat height, position etc (which sorted out my lower back pain!) and adjusted hand position on handlebars, but still have this constant pain? Is there anything else I should look at to sort it out? Please?
Try out buy some hyperextension machine and TRX or do some ABS you Will get more strenght INTO your Core.... Is your Pain muscular or your Feel that its something like in the bone...does it has a specific side...mine is right side...but that because i am tall and when i played tennis i made a traumĂĄtic injury 2 disclocated discs on the Lower Back...
I had something similar. I was getting pain in my arms, especially my inner elbow, due to hypermobility issues (my elbow hyperextends past straight). One of the quickest fixes for me was to concentrate on keeping my elbows slightly bent and keeping them soft and relaxed while riding. This allows me to absorb any shocks from the road which is great for the shoulders as well as retaining forward momentum, but also relieves any tension on muscles, tendons, and ligaments in my arms. Longer term fix would be to work on core strength. I like to do about 10-15 minutes of core every night before bed, but always make sure to incorporate back strength as well: many people forget that their back is actually a component of their core! Hope these can help ou!
Hi Katie good video all my raod bikes are the same mesurments
Such a good video. Would be interested to know what Phil thinks of the trend for wide gravel bars? Are people getting hand/wrist, neck or shoulder problems?
Flared gravel bars solve the issue since most people ride on the hoods anyway. Narrow on the hoods, wide on the drops. Reach is also affected by stem length, so handlebar width should be paired along with it.
Endurance XC riding exist, and they use flat bars that are more than 600mm long.