How to Evaluate a Used Outboard | Tips on Buying a Used Outboard | Boats.net
Vložit
- čas přidán 28. 06. 2024
- See how to check a used outboard before you buy it in this video from Boats.net.
Outboards can take a lot of wear and tear out on the water. In this video, John will tell you about what you need to look for in a used outboard. From the aesthetic things that might be readily apparent to the hidden things you might not see without doing a little testing.
Here’s your used outboard checklist:
Will it fit?
Any damage?
Check the oil color.
Check the water pump.
Check the cowl gasket.
Check the oil level at the dipstick.
Check the spark plugs.
Do a compression test.
Crank it up for a test run if possible.
Does it include controls? If so, what is their condition?
Read more about evaluating a used outboard here: www.boats.net/blog/how/to/eva...
Considering boat propeller options? Learn about steel vs. aluminum props here: • Stainless Steel vs Alu...
Need aftermarket and OEM outboard parts? Find them at Boats.net: www.boats.net/?...
Talk to us:
Twitter: / boatsnet
Facebook: / boats.net
Instagram: / boatsnet - Auta a dopravní prostředky
Putting it into gear whilst on the muffs is a good test
Thanks my friend. Clear, sequenced information. Looking for a kicker right now, so this is timely for me
This was really helpful. Thank You!
Great tips. Do you also have videos of what to look for, when inspecting a fiberglass boat?
Have you ever heard a Commercial by John Sirpills around 2000 where he just sings Boatsa Boatsa Boatsa Boatsa advertising the Boat Chow? It’s hysterical! It should live on.
Great info, thanks
Great video
Awesome. Thx, man
About 8 years ago my friend and I were bass fishing in Sturgeon Bay Wisconsin. We were fishing the shoreline and going back and forth using a trolling eclectic motor. When arrived there was a small boat on a lift with its motor running. It was about a 1 or 2 year old Merc 15 or 20 horse power and the guy had it far enough out of water that no water was peeing out the side of the motor. I thought about yelling to him but his house was 300 feet from the shore line. So we fished for about 20 minutes and the guy never came back down. We left to another spot. So buying a used engine is a crap shoot.
Thank mate from Austrakia
Thank you 🙂
Perfect
Going from rebuild my crf450r to tips on buying my outboard 😂😂
Literally me rn lol
Bout to look up "replacing sway bar links on 1997 Town car" lol
How do i check the time/hours of an outboard motor if there is no gauge ?
John,
Can you help me in determining if an F225-TRXD mid-section will accommodate a F225-TURC powerhead? My (TURC) is subject to the corrosion issue and found a mid-section. Same year and hp (04' 4-stroke, 225TURC). Mine is a 30" shaft, and the other is a 25", but I'll just swap over the adapter and shift rod. I'd appreciate your wisdom on this..
Thanks. Maryland? Northern Virginia? D.C. area?
Im looking at maybe getting a 2010 yamaha 115 outboard any problems i should know of or anything to look at specially? Its only done 170 hours
All great tips. One more thing you might want to check is spark especially if you can't see it running.
I just bought a used motor without seeing it run. The seller told me there was spark and compression. It was cheap so I took a chance. It needed some work to get it started. The reason I bought it was for spare parts since I have the same motor. It may turn out to be a better motor than the one I have.
When shopping for ANY used ICE equipment, bring a compression tester and spark tester. They're cheap. If it's a 4 stroke, you'll want to see it run since you can't check timing.
I have a 2005 25hp Yamaha two stroke man start runs good but hard to crank after it sets for a week or so carbs are spotless it's getting gas and fire compression is 90 over 89 cold new coils also any suggestions
I got a 16 foot 6 inch fiberglass Jon boat what horse power and it a 15in transom
Good afternoon everyone. Which is the best website to look for used outboard motors? 120HP? Thanks in advance.
Hi John, I have a "rookie" question about the fit of an outboard. My transom is 20" from top to the Vee in the center of the hull. So I'd be looking for a 20" shaft on whatever motor I end up with. My question is, which plate is the cavitation plate on the motor? I see there's a smaller flat/horizontal plate, (sticks out towards the front of the boat) which is about 2" ABOVE the next, larger plate below it, (sticks out towards the rear of the boat) and is bigger than the one directly above it mentioned just now. In this video, you seem to touch/point out the upper plate when you're speaking about the cavitation plate,, is the upper plate the "cavitation" plate?.
It's the lower plate.He touched the wrong one.
I have a 88 mercury six cylinder I’m having problem with my fuel. I change the fuel pump and still having problems. What’s going on with it?
What about if the boat is on load and can not seed up
Hey Jon I got a question for you I have a 50 hp Honda four stroke 2012 run excellent can drive 10 hours with no problem omitted I come to an idle for at least five minutes I got a beeping sound it’s not overheating and oil pressure is good what do you think the problem could be thank you
Also once the beeping starts if I shut the engine off and restart it the beeping goes away and comes back 10 minutes later
Maybe check the owners Manuel should say what could cause it
@@TheOutBoardSurgeon Problem was the oxygen sensor which come to find out Honda has this problem frequently
Thanks
@@CapeFrank57 glad you were about to get it fixed and thanks
Impeller
Cools when running then at idle the high temp buzzer comes on the impeller rubber is getting hard
Hi i want to know how to compare the hours of a motor with "miles" lets say a motor has 500 hours from 50 miles an hour i get 25000 miles on it. is that assumption correct? thanks
There is no way to determine this but very few outboards in the world would average 50mph. Half that would be more accurate. Remember every journey starts with launch, idle, low speed away from the ramp. And not many boats can even travel 50mph
Please i will like to buy used 2 strokes outboard engines whole sale price
NICE VIDEO BUT YOU COULD OF AT LEAST ANSWERED A FEW OF YOU FANS QUESTION