AuxBeam 8 Gang Switch Install and Review... Is It Really THAT Easy???
Vložit
- čas přidán 26. 11. 2023
- AuxBeam sent us a 8 gang switch and a couple lights for Mel's machine. Great video if it’s your first time doing wiring!
• COILOVER INTERNALS 101...
#krx1000 #kawasaki #auxbeam #install #review - Auta a dopravní prostředky
GET 15% OFF YOUR OWN AUXBEAM SWITCH POD WITH CODE: D3O1. FOLLOW THE LINK BELOW. THANKS FOR WATCHING!!
auxbeam.com/D3O1/AR800
Cheers from a Land Rover enthusiast living in the UK. 🇺🇸🇬🇧
I was interested in the Auxbeam vs. MicTuning so I went with MicTuning.
Thanks for watching from across the pond!!
Great video, thanks for sharing. Can’t wait to see more electrical installations using the switch.
Your (this to this) terminology is exactly how I approach anything electrical Mel! Great job guys 💪😎👊
Ahahahaha! Glad I’m not alone 😂 thanks for watching 🤘🏻
I install them on all my machines now, love the auxbeam switches
Been rockin' my RGB Auxbeam for over a year now and it's been great. I mounted the fuse box behind the center console on some tabs I made right beside the glovebox and mounted the 8 button ... buttons to the roll bar above the windshield.
You both are awesome. I installed it on our krx 2021 under the dash. 3 years works perfect. 8 Auxbeam marine kit. Great information for all riders.
I have installed 20 + auxbeams. Under dash or hoods. Next one I will use fuse box in the KRX great option. I installed the first one in 2021 Krx. Still working perfect. We now use marine grade auxbeam. Awesome job. Great videos.
All my girls and grandkids get involved, after 45 years in the garage they learn something through osmosis! Great job guys! Just bought a new 2023 KRX this weekend the project is just getting started!
That is awesome! 👏 thanks for watching
Works perfect installed it in 2021. In our Krx. I have installed 20+ 8 Auxbeams under the hoods or under the dash in utvs. Your location is a great option. Next one I will install into the fuse box. I run all the wiring even if the don't have all there accessories for the auxbeam. Most now know what they want and are ready for accessories in 2024. You both are awesome. Great videos.
Another great video! I've been using it for over a year now. FYI,,, 2 relays are 30 amp the rest are 20 amp, you would have to change out the fuse to the size you want. You'd have to be careful of not exceeding 60amps total. Great job guys!
Yeah for sure! Thanks for watching and commenting some good info to help everyone
I've been searching for an answer that nobody seems to be asking the question for - Do I "NEED" to follow the Auxbeam recommendations for circuit loading? (i.e. is the control module limited to the circuit load ratings by design? (30a, 20a, 10a, etc?)) Or can I just switch around the fuses to make circuit the amperage different on other buttons, providing I don't exceed the maximum amperage rating of the box (or 30 amps per circuit)?
(9:00) I think I have my answer here, but I'm going to ask the community anyway.
My box has two (in amps) 30s, two 20s, two 10s, and two 5s in descending order from top left to bottom right (8 gang), but for the purpose of mapping switches out on the panel, I want to put things in different places, like a bigger load towards the bottom right of my panel. I'm just worried the internal solid-state relays might be rated for the ratings listed on the module, and no documentation seems to mention this limitation.
Your comment seems to give me a glimmer of hope, but I have no idea how solid-state relays work. Would almost prefer the mechanical relays and just switch around the ones I wanted, but here we are. Also, I bought a smaller 6-gang Auxbeam panel with mechanical relays and all of them were 30-amp relays despite the fuses varying from 30a to 5a, which makes me think the solid-state relays might also be rated to 30amps...but I'd never bet on an assumption like that.
I'm hoping someone out here has an answer to this. As an auto electrical guy, I wouldn't even think of overloading a circuit beyond it's rating, but I reeeeallly want to put the circuits in different places, so I'm kinda stuck at the moment.
Thanks for any help from anybody, and great video guys. I was only able to breeze through it on my quest for answers but it was solid. Liked & subbed.
Great job
Thanks!
I hear you about the no-reverse lights deal. I mean really, these things are pretty much the size of an automobile, and I can't count how many times people have just started backing up in front of me with no warning. There should be a factory switch on the trans to activate them.
Nice job 👍🏼
Thanks! Thanks for watching!
Love the content ... I'm a KRX junky as well... what lights did they sent you ?
Great video, Enjoy all you videos, keep up the good work. Question I have, when you connect your seat heaters to the pod, do you loose the high and low temperature capabilities?
Thanks for watching! The prp seats only have on/off function not high and low so we did not loose that function, if you have that than it would need to be wired differently for sure 👍
Excellent vid having Mel do the work really helps you both explain it clearly. Did the Auxbeam pods you mounted on the pillars above your mirrors come with a mount or did you fab them up?
Thank you! I just grabbed some metal in the shop and whipped them up quick for her, maybe next time I’ll have her weld them on what do you think?
Regarding swapping out the fises for larger ones the only thing you need to worry about is pulling too many amps overall to overload the circuit breaker. If i recall correctly when i installed mine i noticed that all the amps from the fuses combined equaled its max amperage rating. So as long as you dont run everything all at once on higher amp fuses you should be fine
Yup especially if you run everything at once! Which usually isn’t the case but if you did the main breaker would trip for sure it’s the safety
@d3offroad How has the fuse box mounting location worked out for you? I have mine behind the dash, but access to it obviously is not easy, I may look to relocate it like yours.
So far it’s great! Easy to add more items when needed! No issues to report as of yet
So on mine number 4 is a 5 amp fuse, can i run a light bar on number four and just put a 25 amp fuse in? or do I have to go to the 30 amp socket?
You can put a 30amp fuse in that location but need to put a 5amp in one of the other 30s than, you can’t increase the total but you can move them around if needed
Question guys, when the lights come plug and play with a rocker switch and relay do you just cut off the switch and relay and just run the 2 wires?
great video you guys. I wish my wife and I worked together like you guys. Lol
That is correct, you can run it that way for sure 👍
Hey love the video! I had a question is it waterproof? I’m interested in buying one but I’m not sure if this unit can be submerged. I’d love your feedback, thank you!
I’m not sure about submerging it completely for extended periods of time but it can get wet for sure 👍
My camera does not automatically turn on in reverse. I used the plug and play from kawasaki. I have to go to menu then select camera. I can toggle between fron or rear.
That is interesting information! As our one machine with the 7” display the reverse comes on automatically when shifted into reverse so you can see the camera! I wonder if it’s a settings thing
@d3offroad i went through them but its all new to me. Ill have to check again.
What brand of light is the 6 “ that you are going to use for back up light
The lights are Bright source brand
The pod lights have that push button on it that changes between the yellow, spot and combo. How did you deal with that on the switch? I have the same switch in my jeep with the same lights. Thanks,
We cut apart the harness and decided to only use the spot light. We got rid of that button entirely. Now if you were wanting to use both options, what we did in the rear with the flashing amber, is we wired each wire for each option to separate buttons. Does this help?
@@d3offroad It does help thank you. I have a RGB auxbeam light bar that I tried that with that had spot and then a different area that a controller would change colors. I tried running it to 2 different switches and it didn't like it.
@@n2sport1 Hi. I'm in a similar situation. I have a multi-mode Auxbeam LED light bar that I want to install using the RGB 8 gang switch panel. I know you said you didn't like it, but did it work? Were you able to cycle through the modes in your light bar? The other question is does the switch panel eliminate the need for the factory relay(s)?
Nice install. The only thing I would have done differently is to replace the wires that come with the unit. They are copper cladded aluminium. So not the greatest thing.
Thanks for the tip!
Did you figure out the reverse light off the shifter?
We forgot to talk about this after the 8 hours of install, LOL. We decided to try to do that another day. We will post up a video when we do that!
my Yamaha Rmax has reverse lights .
I have heard that!
So does my Yamaha Viking. Yamaha has it figured out.
Love the video, because let's face it, electrical sucks And if you're not laughing, you're miserable. Couple of things for you. Yes, the fuses are interchangeable . What you need to know when you make a circuit is the amperage draw ir the wattage of what you're applying to a circuit. Lights pretty much all tell you what their wattage is. So if you have a 240 watt light bar, you're going to want a 25 Amp circuit. Ohm's law helps. P = E x I or wattage equals voltage times amperage. 240 = 12 x 20 The reason you want slightly higher fuse (25 in this case) is to allow for surge and fuse wear The other thing I would have done with your build is add a mini ANL in line fuse from the battery to the relay to protect the entire circuit to the block. Also, look at some of the tilt forward options for your seat. Allows for easy removal and will raise Mel up about an inch and a half, which will help with her ability to reach and her visibility. Plus, it will be far easier to get to the fuse block if you need to.
Electrical does suck!! Lol! And thanks! Definitely all things to take into consideration! Removing the seats is definitely a pain.
Hello D3 Off-Road. Would you add caption or subtitle please so I can undy what you say. Thanks so much. 👍🏻👍🏻
Hey there, the auto subtitles are still processing. They should be available soon!
not a relay a 50amp breaker
Boring. Can't watch the whole video
Nothing worse then rock lights on a axs
We love them for night rides and find they’re good for some ambient light at camp, but each to their own!
Add a fuse
I have installed 20 + auxbeams. Under dash or hoods. Next one I will use fuse box in the KRX great option. I installed the first one in 2021 Krx. Still working perfect. We now use marine grade auxbeam. Awesome job. Great videos.