IKEA KITCHEN ISLAND INSTALL - Part 1

#ikea #ikeakitchen #kitchenisland #newconstruction
Today I get started on the kitchen island at our spec house.
Want to support our channel?
Click here - buymeacoffee.com/gc59ph74fwh
MY TOOLS
AIR SHIM - amzn.to/3hnwEgU
DEWALT IMPACT DRIVER - amzn.to/3uKmkTa
TAPE MEASURE - amzn.to/3iSKUP0
MY KNIFE - amzn.to/3WcL3LG
STUD FINDER - amzn.to/3HAcB9L
DRILL BITS - amzn.to/3PicYHL
FLASHLIGHT - amzn.to/3uJCJHn
WORK LIGHT - amzn.to/3HyFR0n
MITER SAW - amzn.to/3iVRuEm
TABLE SAW - amzn.to/3W8azl4
2 FOOT LEVEL - amzn.to/3iZ1YD7
4 FOOT LEVEL - amzn.to/3YgiQ8s
LASER LEVEL - amzn.to/3hnmr3V
KNEELER - amzn.to/3V6ENUR
MUSIC
moma By GurtyBeats
a story yuh By GurtyBeats
side hits By GurtyBeats
Trouble by GurtyBeats
do more By GurtyBeats
NYC SkateHop By GurtyBeats

[@leestallings9400]

That house is awesome! Great job Mr. Whitehead

[@MDCHOMES]

Thanks man.

[@ronnyrrr]

Solid work, love the pipe cut outs - love from the UK.

[@MDCHOMES]

Thanks so much. Appreciate the support from the UK 🇬🇧 👍

[@genericreference6969]

Entertaining and instructive as always :)

[@MDCHOMES]

Thanks so much for watching 👍

[@GurtyBeats]

Ayoooo much love!

[@MDCHOMES]

Your stuff is amazing!🔥🔥🔥

[@charlotteblitzblum93]

Wow Nice

[@MDCHOMES]

Thank you

[@Jaggersification]

40 deep stronger than ever.

[@MDCHOMES]

Thanks boss

[@stephanierichard8186]

SUPER HELPFUL! What size screws did you use to screw the cabinets together- when they are right next to each other?

[@MDCHOMES]

I believe I used the ones ikea provides with the cabinets. If not I used some very similar that i had on hand only with a torx head. Just something short enough not to pierce all the way through. Hope that helps. 👍

[@stephanierichard8186]

@@MDCHOMES Thank you! I bought better screws for the hang rail and it made a world of a difference. Figured I should pick up a couple more Misc screws for the rest of the project.

[@MDCHOMES]

I used grk construction screws for the rail and toggle bolts where studs weren’t accessible. Good luck on your project

[@SnowyMango]

Why not use the parts ikea offers for islands? They have floor anchor studs, Island top brackets, and back brackets they all connect to the base cabinets they offer

[@MDCHOMES]

I guess the simplest answer would be ignorance. Just never knew they had them. Thanks for the tip 👍

[@Nikolee]

What kind of flooring is that? We have Pergo laminate and from what I understand we shouldn't attach anything to it? So I think we'll have to cut out the flooring where the island is going to be..? Also, what distance to you leave between the island and other cabinets? :D thanks!

[@MDCHOMES]

This is also pergo laminate. Attaching anything to it won’t do much good since this is a floating floor. In this kitchen i drilled through the flooring directly into the concrete below. I always like to lay the flooring first and have it under the cabinets. It seems quicker to me since you don’t have to make as many cuts to go around everything and if you ever change the cabinets there will be flooring there instead of a bare spot. I believe the island was a little over 40 inches from other cabinets to allow for a wheelchair if one was ever needed. 👍

[@dr.chrispark]

Very angelic opening

[@MDCHOMES]

High praise. All down hill from here I suppose.

[@Oguzktk40]

Part 2??

[@MDCHOMES]

Editing now.

[@no_clot_shot1128]

5:11 off topic but chemtrailing is insane in the USA. 😢

[@MDCHOMES]

Not my field of expertise but I believe those are just contrails. 👍

[@no_clot_shot1128]

​@@MDCHOMEStrue, probably not your area of expertise. Not hard to Google the difference between the two though. Nice kitchen 👍