ECS Tuning: BMW Coilover Installation
Vložit
- čas přidán 6. 09. 2024
- BMW Coilovers available here: goo.gl/4i4O76
We install the ST Coilover System on our E92 BMW 335i, however, these general steps can be used to install various brands of coilovers on a wide variety of applications.
BMW Coilovers available here: goo.gl/4i4O76
Thank you for the amazing tutorial! Could you please list us the tools needed for the job as well?
It’s been a decade, and this is still one of the BEST CZcams tutorials of all time.
THIS IS HOW EVERY DIY VIDEO SHOULD BE .. HE COVERED EVERY SINGLE STEP....GREAT DIY!!! I'LL BE DOING THIS SOON ON MY E90...KEEP ON UPLOADING VIDEOS... I'M DEFINITLY SUBSCRIBING .
Yeah I was expecting a comment like that as I scrolled down...absolutely great DIY video. One thing i think it would be good to go over what to put back together as you are reassembling the front suspension.
he didn't mention he removed the strut brace. great vid nonetheless.
How close was this to the E90?
I'm putting B14 Coilovers on my 2010 335D next weekend.
Great video. Extremely professional quality of work. Give that dude a raise!
Agreed. He deserves a fat raise!!
I think the person that wrote the video also deserves a raise iv seen videos even from companies not state torque And leaving me searching the internet or a bunch of work manuals for it,thanks for this video its gonna come in very handy soon 🤞🏻
Hell no, Not with that background music.
All involved in this production should be very proud of it. Concise and matter of fact. Excellent throughout touching all bases. Illustrating and verbalizing all torque specs was a great inclusion. Thumbs waaaaay up. Bookmarked for sure.
The best DYI video I've seen. All steps are clearly explained. Professionally done.. awesome job dude!!
this video helped to save me 400 bucks to get my springs replaced. thanks so much for DIY video. Respect!
I love how professional you guys are. Very rare to find people that take care and attention. Respect.
Those st coilovers are as soft as oem if not softer. Learned the hard way.
Seen a few videos doing this now, you're the only ones to not remove the tie rod or completely undo the control arm. easier the way you do it.
At 6:11, the closed caption quotes says '165 millimeters' and at 6:17, the video captions correctly show 165 Nm (Newton/meters) for the bolt torque setting.
I remember doing this job thanks to this DIY when I started learning. Very easy to do with it.
If you came here to install your KW HAS system on your E92, the front perches need to be pressed on with a shop press. Otherwise they will not slide down the strut far enough, and your ride height will be almost 3/4" higher than it should be.
Best 335i Installation DIY on CZcams. Thanks from Germany.
Man wish cars looked this clean in Rhode Island
Helpful video thank you. But I will add when he says to not worry about the alignment when loosening the inner bolt on the rear lower control since you'll need an alignment anyways ignore that comment. Mark it and make sure you get it back into that position. I just loosened and re-tightened it only to extremely put the alignment out of whack. Out right dangerous driving on the wet free way later that day. Major rear steer going on. I then adjust it by just eyeballing and its better but still very out of alignment and now have a dsc malfunction. I plan to get it aligned of course but not after I drive it a bit and make minor height adjustments. Would have been a lot better to maintain the alignment I did have by simply marking those bolts positions.
This video saved me lots of time and effort today installing my coils
Excellent video, perfectly concise and professional!
+PR0J3CTXYZ Agreed it was very professionally done.
It still surprises me when (many) people who I would expect to know call it dampening instead of damping.
If your suspension is dampening anything, you probably have a blown shock/strut!
Just installed my full coil over kit in my driveway with only floor jacks and hand tools, honestly I could have never done it without this vid, big thanks to ECS tuning!
cant post pics on CZcams unfortunately :(
I ran into into a problem. I thought I was prepared, but I wasn’t. I need pass through sockets to tighten shock on the bottom. My question is, since I tried tightening the 17mm bolt and the shock was just spinning, did I damage my brand new shock by it spinning freely? This is Koni STR shocks
Is there a video for xi awd or would I basically be the same just need the xi coil overs is there any difference in installing?
That 335i is spotless. Thanks for the bitchin presentation.
What a fantastic, thorough explanation of coilover installation. My E90 goes in to the garage tomorrow for an install I will be referring to this video as they work on it ! ! ! to make sure they are doing it right !
Great video, just ordered some Bilstein p14 from you guys,, hope my tinstall goes as smooth bas yours
Good luck!
cảm ơn bạn đã giới thiệu và hướng dẫn rất chi tiết,BMW Coilover installation
So glad I found this video ! Thanks heaps ECS !
Glad it helped!
If all mechanics could be has good as this guy!
Hello, May i know the reason behind to rotate the bolts to 90° @16:09 after torquing them down.. Thanks..
This is what I'm wondering too. Any thoughts on it?
Like if he already torqued it, if he tightens it again to have the marker lines 90 degrees that wouldn't be to spec anymore
@@seanthao that 90 degrees is part of the torque spec according to bmw. A lot of torque specs require an specific additional degree of rotation after the foot pound torque figure
Thank you so much for making this video. I assume this will work for 128i
where could I find that tall jack?
A very slick presentation and a joy to watch.
Well done. You didn't fly through and I actually learned something...
Hey! Does anybody know if the the tightening specs are same for all e92?
I love that you don't show the use of your spring compressor adapter plates.
Thank you Mike with ECS Tuning
Great video guys. Thank you for including torque specs. Well done.
Great video, great tips!!! I tackled my coilover installation this weekend and your video was extremely helpful, thank you for sharing!!
Sometimes I wonder is those random shops actually take the time to torque the bolts to spec or just use the impact gun and call it a day!! :I
They use an impact and call it a day, working in a shop can be brutal tbh, everyone is working on commission, some techs straight up don't care and will use an impact on everything so they can flag hours, it's rough out there.
Great video. Can you please tell me the size of the nuts and bolts on the rear control arm please? Specifically the ones that you are only to tighten when the suspension is loaded. Thanks!
awesome video this is how you roll
Very good explanation!!One of the best I've seen! Thanks a lot,keep it on!!
Question: Can I go ahead and torque the strut nut before it is installed? Or is this something that is recommended be done after installation for fitment purposes? Thanks and excellent video, has been priceless in terms of knowledge and help it has provided!
What was the 90 degrees after you torqued down already?? Extra tightening??
Whats the purpose of the 90 degrees turning of the bolts for the control arms after you have torqued them down to factory specs?
excellent video. This video added so much clarity to my upcoming project.
Love the detail work !
Great vid. Awesome play by play. But I have a none related question. Why the exhaust. Big brake upgrade. BOV. But stock air box?
Also, where can i find the torque wrench tools small enough to torque the 3 bolts of the strut under the hood?
SUBSCRIBED... I especially like that you actually make an effort to respond to viewer questions...
how much do you guys charge for coilover installation for F30 ?
This is a Super coilover instalación video... good job!
Hello, I ordered a ST coilover kit , for my 08’ BMW E88 and was wondering how to access rear strut
Great video guys! This helped me out so much while installing coilovers on my E92
is their anyway u can list all the wrench and socket sizes needed for this install please. It would be greatly appreciated. thank you
@ 3:57 he didn't say the size of the lower control arm bolt :/
Gold medal diy video🥇
11:43 no spacer on top of the strut mount?
What tool did he use to torque the strut nut
That would be a torque wrench
so the alignment is needed for coilover installed, but what about the just springs installed? still need alignment or not?
Absolutely Zero it is always best to get alignment done even when changing springs as it can affect the camber etc.
YES ... if ride height changes geometry changes, period!
wow I shouldve watched this before installing megans on my car, I had to push down on the rear rotors cuz i didnt think about the rear control arms like that. BTW i needed wheel spacers in the front so ALWAYS have them just in case cuz u will be rubbing and messing up the inside of the wheel (2 days did a number on mine)
If i want a confortable ride in my BMW whitch suspension setting is best for the car
Bilstein b8 and eibach springs
Fantastic video. Helped me immensely! Thanks!
Thank you for the great video, thumbs up. I wonder if ECS Tuning is Deutsche TUV approved.
ECS, would you happen to have a specific video for installing the FK street line-coil over kit on a MKIV?
oh man, I wanted to order the FK's from your site but needed a DIY video..Thanks tho
@@charleshang2842 you could have watched any brands' cheap ass Chinese coil over install video on a MKIV and applied the same process to the cheap ass Chinese FK's. Then made your own video to share with others and help them.
However, if this was an actual question you would have been better off contacting ECS directly- Instead of posting your question on a CZcams video that's installing ST coils on a BMW. It seems common sense isn't very common these days.
what wheels are those? they are sick
I have the issue of my shock going thru the top and I think it might be the bushings can someone help me?
Any idea if the torque specs are the same for a 09 335i Xdrive? Great guide by the way, super informative!
Awesome ! Thanks !!
Great video. How similar is the process for an E92 M3? I figure it's very close, if not the same process.
Same process
Brilliant video and great advice however I have one question, if you set it all up then drive for a week while it settles then get an alignment don’t you risk uneven tyre wear?
Do you know if the F30 335i is roughly the same? Rumor is they are much more difficult. Very well done video btw, great job and just all around pro!
Nice exhaust! Which brand and size pipes?
The car is clean af, I have 2009 e93 335i dirty af 😂
Would it be necessary to replace the bolts that connect the contol arms to the (forward) subframe? I've taken the tension out for extra clearance on the strut/fender..
when you lower the car, I suspect you have to do an alignment?;
I don't understand how this can be considered a full coil over kit. The rears aren't adjustable? I've noticed this is the case with almost every BMW chassis coil over kit, the rears aren't coil overs at all? Why is this?
PlayerNineteen they are adjustable
omg is that a brand new car or what?!!
The undercarriage of my 2006 bmw e91 is so freaking rusted that it looks like it was built in 1952
Where can I get that shirt for my shop? Thanks
Excellent video
Can you tell me what exhaust that is, looking for tip diameter. Thanks!
Pro install. Looks great!
Fantastic video 👍🏼🤘🏻💯
Muito Obrigado
Esta exelente o vosso Video
Obrigado
Would be nice if you had a list of tools needed...
How about he just comes over & does it for you the gives you $100?
Thanks for sharing! Very informative. =)
Really informational, but the way the vehicle shifted on the lift at 6:20 could of ended horrible. Please be careful if installing on a lift using the same method..
Great Video , Love it !!!
that was an awesome video.
Perfect job
is there any harm in installing the rear spring perch on the control arm? I've seen setups with the adjuster at the bottom.
On the e9x the lower spring perch is part of the subframe (and is quite aggressively shaped) so an adjustable lower perch wouldn't be optimal
Is the process much different for an e82 135i? @ECS Tuning
Thanks
The overall process should be similar.
Hi,
What wheels are installed?
is it the Same process for E60
06 525i
yes, essentially
What size wheels are those?
very well done video, damn nice
Excellent instructions 👍
What ride height do you recommend for track/street use of a 2011 335is
lower than stock, but might depend on the road conditions next to your abode
Awesome explanation mate. Could I use the same torque settings for 2005 e90 320i sedan? Thanks.
Toko H assuming you've already done it... but they're not the same. Bentley manual suggests a different number for our e90s (installing ST coils on my E90 330i today)
Nolan Norris what are the specs you used if you don’t mind telling?
Hi, great video and sheds loads of light suspension . my 116d se I notice the the rear right gap between the tyre and wheel arch is smaller by 1 to 2 cm than the other wheels, so basically one side looks higher than the other. Would you know what might be causing this??
+awais shah thats how bmw set up the suspancion to comensate for driver weigth.
+Balle K.Lorin it does sit lower on the driver side around 1 cm I've seen this on a few cars , is that normal for the car to lower on the drivers side / right hand drive car
+awais shah i have read bmw documents that say the ride higth is a little lower on passanger side, and i have messured my own car E92 m-sport left hand drive, my left side is 5mm higher, so yes this is normal.
Great vid ! Tx !
dope