Airsoft PolarStar Jack 1.1 Installation
Vložit
- čas přidán 18. 05. 2024
- Today, I disassemble my V2 gearbox and install a PolarStar Jack 1.1 engine. Nuff said.
Music:
[FREE] Freestyle Beat - "Midnight" | Free Type Beat 2022 | Rap Trap Instrumental
• [FREE] Freestyle Beat ...
___
Other Social Media Account(s):
Instagram: airsoftmech...
TikTok: www.tiktok.com/@airsoftmechan...
** Use code "AMB20" to get 20% off through www.bastiongear.com/ **
** User code "Mech10" to get 10% off through jefesairsoftsolutions.com/ ** - Zábava
I HIGHLY recommend removing the bushings, I didn’t initially, and one of them fell out mid game, and jammed the trigger in the pulled position
There so easy to install a heads upto some if you put a piece of electrical tape on the bottom of the gearbox when the mag fits in toThat will help line up the nozzle if you have issues. I tech evrything if you have questions just shoot :) ... also i recommend getting a different grip line theres suck after awhile i switch my to filtered wolverine line
this is defo gonna work im doing a build series (not recording it just seeing what i can do) with a lancer gen 2 and have never seen a hpa lancer so wanted to do so and this is gonna help allot fam💯💯
Great video brother
Thank you! And thanks for watching!
Do keep in mind if you aren't using a V2 gearbox you need to know how to solder because most will use the original contacts. That's why if you aren't doing this on a V2 or v3 if you aren't good at soldering have a professional do it but it's a good skill to have.
Just an addition; you DO NOT need the cutoff lever!
Aye. Aye. Who let the ATF in here?!
my trigger wont connect to the fire button on the trigger board and i dont know how to make to where it stays in place
A question did put the fire selector switches
Duct tape the trigger to your work surface. Prevents it from moving and popping out of place. Little trick I came up with.
Leo Kuklok Work smarter. Not harder. I like it!
Helloo i just got my first m4 airsoft what do you recommend on a first upgrade?
Generally people would start with changing out the hop up, hop up bucking and inner barrel. But It all depends. Like if you’re using it for indoors or outdoors, you may need different springs.
What does the jack come with? I need to know if I need to buy the air line and the connector thingy separate?
Aiden Knowles at 1:00 I go over everything that it comes with. Everything else beyond that is separate, especially the fitting needed
Aiden it comes with the line but you have to buy the qd fitting. Imo just buy an amped line or wolverine one it's fixed right to the line so no leaks over time !
When you’re playing with a P* Jack, do you have to keep the fcu and the battery in while you’re playing or take it out?
Yes, the battery and FCU have to be connected in order for the Jack to work
thank you 🙏
Hello! Can someone please write me a difference between jack 1.0 and 1.1 versions? I can’t get to facebook, post seems deleted :(
Hello is the Jack interchangeable between v3 and v2 gearboxes? Thanks.
If I’m not mistaken, it’s possible. You’d need a V3 trigger board, and the right nozzle length
@@airsoftmechanic ok thanks
Do you think the polarstar jack is worth it still? I'm wanting to get into hpa, and I want to do it as cheap as possible. I didn't know if I should just save up more money to get the f2 or not.
To me it’s worth it since there are less moving parts in a Jack. The F2 is bigger than the Jack, and allows for more precise tuning. Though it costs more.
It’s personal preference, but to me the Jack is definitely worth it. Still running it to this day with little to no issues
@@airsoftmechanic Thank you. I’ve been getting mostly this response from people but some people also say it’s outdated and stuff.
@@amymathews-muttwill7733 I think even if it was outdated, it shouldn't matter
I noticed you failed to mention and show you removed the safety selector on the inside of the gear box to get the trigger board to sit in there. Why?
Rusty Shackelford Hey there! Took me a bit to figure this one out. I have all the footage saved and unfortunately I used the wrong clip. I have the footage of where it was removed and I used the one where it was still attached. So it was an editing flaw on my end
@Airsoft Mechanic lol all good I figured it out
my jack dosnt fit into any three of my gearbox im having trigger board fitment issues. whats a gearbox that will just drop in no modifing? besiesd the retro arms not tryna drop $105 on just a gearbox
Probably a g&g gb
did you get the right engine for your gun?
@@nsd_lighting1027 yeah it ended up being the gear box the 4th one I ordered was a cheap lancer tac one from hop up for perfect
I have ecs pxg by classic army and it dose not fit for some reason,help?
What part of it is not fitting?
@@airsoftmechanic ok I got this junk working but the gun was special made gearbox so I had to put a new one in and grind down some crap
Yo man. I cannot get my wiring harness into the plug ins at all on the FCU on the board. I’m not sure why but even with a massive level or force they are not housing right. None of the pins are bent, any ideas?
The port on the FCU, and the connector on the harness are shaped to where they should only work 1 way. You shouldn’t have to force it in.
If all fails, contact PolarStar
@@airsoftmechanic How far is it supposed to go in? all the way? Mine only goes in about half way.
@@Ron1nAirsoft Yes it should be all the way in
si quema cuh
Spectre Lolol 😂
Will this work with arp-9
@@abrammata567 It should fit the ARP-9, yes
@@abrammata567 ye
My safety lever doesn’t have the spring. It just kind of sits there. No i didn’t loose the spring. I took a picture of the gearbox before I took anything out and there wasn’t a spring. Is that fine or do I need to do something about it?
Yay cat Productions What gun is your gearbox coming from?
@@airsoftmechanic elite force mp5
@@airsoftmechanic it’s a v2 gearbox. But it’s not going back in that gun. I’m just using that gearbox shell because the gearbox internals stopped working
@@airsoftmechanic I just found one with a spring on evike for like $5
@@RylandH-Airsoft Would recommend getting it. The spring is needed as you wouldn't want any loose moving parts inside
what gloves are you wearing
Mechanix Gloves
Does this work on every m4 like gun ?
Not all. It works with most M4 Version 2 gearboxes
Can you do this with a stock m4 gearbox?
DreamStatesOf_Mars As long as it’s a V2 gearbox, yes
Is the safety lever mandatory to shoot?
Everett N Yes it is
can u put a polar star into a aeg?
Ethan Varela Yes
Thats what a v2 gearbox is
this is defo gonna work im doing a build series (not recording it just seeing what i can do) with a lancer gen 2 and have never seen a hpa lancer so wanted to do so and this is gonna help allot fam💯💯
edit: writing this i looked over in my suggestions and there was a lancer hpa speed build lmaoooo
Wasnt that a quickchange spring? 💀 you can remove the spring and tension with the gearbox closed
Ce2 No, it's not quick change. Wish it was though lolol
Its a speed trigger
YahBoiKrystian a free speed trigger
Hey man, I know I'm late but I'm having issues, was wondering if you could help.
The screw that screws in the trigger board in place isnt screwing in, It looks like it lines up and its long enough but its just not going in, Do you think you have any solutions? If you know any other screws that'll work, please let me know, thank you.
ShockedPB If it’s the same screw you unscrewed, it should be able to fit
@@airsoftmechanic Turns out the screw isn't long enough. I did some questionable work with the board and now it lines up although the screw is not long enough and I now have to Dremel the gearbox because the threads go in deeper than I thought. Thank you though.
Do you no longer have to file down the selector with the Jack 1.1?
Alex Pena I didn't have to
The Quick edit where he removed the Cutoff lever @5.39 and hopes No one sees that XD
Exposed
Jesus loves you all and he died for our sins! Turn to him today! John 3:16- For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
Romans 10:9-If you declare with your mouth, “Jesus is Lord,” and believe in your heart that God raised him from the dead, you will be saved.
we’re saved by grace, not by works. Put your faith and trust in Jesus today! He’s knocking on the door of your heart!
You are lying
@@htxvandal5760 I’m actually not. I know this because he’s shown that love on me!
Please read James 2: 14-26
@@htxvandal5760 Yes but keep in mind we’re not saved by works. Good works are signs that tend to happen after salvation. But yes faith without deeds is dead.