Monk Customs ESG Install Guide (Wolverine Ver.)
Vložit
- čas přidán 27. 07. 2021
- Thanks for watching our first video on installing the Monk Customs ESG! AirTac Customs is a small airsoft business aiming to revolutionize the HPA industry by bringing the most innovative products from around the world to the US scene. For cool products like the Monk ESG, Eurotactics, and Gorilla FCU, check out our website!
Our Webstore: airtaccustoms.com/
Monk ESG Pro Kit: airtaccustoms.com/products/mo...
Gorilla FCU: airtaccustoms.com/products/go...
Instagram: / airtaccustoms
Facebook: / airtac-customs-1003854...
We will also be posting more install guides and tutorials for all of these, so make sure to subscribe to stay up to date! We are the most active on Instagram, so for product announcements and questions, make sure to follow us there. Drop us a comment for any questions!
Thank you . Good instructions
Def should make an in depth video on the Gorilla FCU since it seems to be popping off more and more.
Yep, we'll make one about all the settings :)
Your having problems removing the gauge or air connector try taking the whole thing apart and boiling the parts your trying to remove in water. Just make sure you aren’t boiling any O-rings. The hot water should break the glue seal.
This helped a ton to understand how to do the install. Thanks man, you just earned another subscriber!
ok so I'm thinking of getting an esg but not this one getting a polarstar but from this, I've learned that I think I need ofc the grip a battery for the grip for some reason a hpa engine (polarstar) regulator and tank and I can get someone to attach it right?
I had to apply some force putting my Regulator in my Esg. It didn't slide in like yours. Maybe I got one a little over Tolerance. Not problem everything works great.
hey i loved the vid could you do one for the polarstar gen2 reg
Do you know is it’s done the same for the polarstar that they did in this video
Do you still need to do this if you get a monk custom prebuilt?
How do you remove the grip? How does the line come out of the regulator? I’m not sure how the line doesn’t leak by just pushing it into the regulator? Received a gun with the grip already installed. Thanks
Does it come with the fitting for the inside the grip ?
No small washer came off mine where the spring is on the internal part of the regulator. I don't wanna put It back together now
Hey man on ur website the grips aren’t there also can I use a Titian 7.4v 350mah on a f2 fcu
Is this wolverine reg the only one that works or can I use my storm category 5
Do the titan hpa batteries fit or is it tight
Hey airtac I bought a monk esg from you guys and you guys didn’t give me a tournament lock with mine
Would I need a polar jack
Would the same installion process be with the new eurotactics esg 0 degree grip when it comes to the regulator?
Yes
Yep
Would the install be the same for a mechanical engine minus the fcu stuff?
100%
Hi, I am interested in your offer - AirTac x Monk Customs ESG GEN.2 Pro Kit but i am quite not sure which regulator to choose, I am using polarstar F2,. shall I go for micro p* or wolverine storm?
We recommend both, they are very similar in performance and style, but the Wolverine is slightly longer, while the Polarstar is a bit shorter. Choose based on your preference, both are compatible with the F2
Can u get the hpa line out
I want to get one I have a ps f2 would the wolverine reg or ps reg be better or they about the same
Performance is almost identical.
I can confirm, I ordered my Gorilla FCU on monday and it got shipped out early Wednesday! It does say my package is stuck in “acceptance” first time seeing that but we’ll see when it gets here Monday (since they don’t ship weekends where I am)
Hope you're enjoying your GFCU!
@@airtaccustoms I’m glad I came across your website super straightforward and easy to pay. I’ll do a follow up when I test it. Thanks again!
@@airtaccustoms can you use it on the first gen smp?
@@Eliscio Yes, but to use it with Wolverine products you need a Polarstar FCU harness, solenoid cable, and trigger board.
@@airtaccustoms thank you.
If I have a polarstar kythera what esg do I get. Polarstar or Wolverine. And if I get the polarstar one can I use the Wolverine regulator
Either. If you get the polarstar one, you need to buy a polarstar reg. If you get the wolverine one, you need a wolverine reg.
Ohhhh.. does it matter what engine I use?
Aaaaaaaand subbed
Can this grip work with kythera?
Yep! All hpa systems. It's really just a way to hold your regulator on the gun
i’m having a hard time installing the fcu line into the hole they both don’t fit and i don’t wanna force it and break my gun
Same I satured a little bigger hole
What size macro line do you need?
1/4, standard polarstar size!
What happend to the kit
How fast is your shipping
We ship next day!
How would you take out the line if something happened
You need to press the black ring down on your macro fitting
What is the connection called to plug your macro line into?
We call it a Macro Fitting
@@airtaccustoms nothing pops up us it possible for you to drop a link ?
@@user-rf3ko1ck7d We don't sell them separately
Dry disappointed in the quality of the prebuilt grips on airtac it leaks air bc it wasn’t assembled properly
Hey there, email us with your problem and we'll help you out!
Where's the polarstar video 😭
Haha Jake didn't get around to it, DM us @airtaccustoms or email, and we can help you out :).
You want to sell yours
I broke my gage on my storm reg
You did to did it snap on the thread when you where installing it
Can I not use the one that came with regulator
The guy I bought the esg grip from didn’t include the screw to screw jt into the gear box, where can I buy the screws from?
Try mcmaster-carr. They are M3x8mm