Nitro Dave Talks About the Nitrous Outlet WinMax TPS and RPM Activated Window Switch!
Vložit
- čas přidán 22. 12. 2016
- Nitro Dave goes over some of the features and walks you through programming the Nitrous Outlet WinMax TPS and RPM Activated Window Switch. For more information or to order visit www.nitrousoutlet.com or call us at 254-848-4300!
To see more of the WinMax, check out the link below!
nitrousoutlet.com/i-30559958-...
Follow us:
▶Instagram: / nitrousoutl. .
▶Facebook: / nitrousoutle. .
▶TikTok: / nitrousoutlet
▶Twitter: / nitrousoutlet
▶Web: nitrousoutlet.com/ - Auta a dopravní prostředky
just got mine in the mail cnt wait to play with it ..Nice work on the video
Thank you for this.
I would like to purchase this to use with a Zex kit that I already have. Is there a wiring diagram available for this? My concern is that traditional nitrous kits have external solenoids that the window switch supplies ground to within the specified rpm. With the Zex kit the solenoids are integrated into the Nitrous Managment unit and the only connections are power wire, a ground wire and a wire that reads TPS voltage and activates the solenoids at WOT. How would you wire this window switch in?
cant wait to get me one on the stinger
Great products 👍🏻😎🎄
As usual proven performance!
Great products! Been using the stinger plate on my
13B Rotary , night and day compared to the other plates ... This is next on the r&d
Thanks for the feedback! PS. 13b with stinger is pretty awesome!!.
We must know more, email us at marketing@nitrousoutlet.com
Nitrous Outlet
Will do any new plates or products for 2018 ?
Happy New Years
Two questions: Do you offer, or can one install an external shift light to the controller? I won’t need the LNC-2000 for retarding with this unit?
What els will u need to pull timing using this controller
Are you able to customize the hit timing for each individual gear to come in a different RPM point, or will it be set for all gears?
Does gear lock out work for manual scatpacks?
@Nitrous Outlet I have a 2016 lt camaro v6. So would this be all I need besides a nitrous kit and timing retarder? Going to install a wet system.Basically I stomp the gas and this controller does the rest?
You pretty much got it! Our Stage 3 accessory pack would be a great addition to your system as well.
Can I switch from winmax to a Promax without doing complete rewiring
What progressive controller would work with this because I need all of the functions of the winmax but also need a progressive controller
You need to take a look at our ProMax! Progressive control, RPM window switch, TPS activation, gear lockouts and a WHOLE LOT MORE! www.nitrousoutlet.com/electronics-ignition/progressive-controllers.html
Mine was just installed on a 98 C5 M6 Vette. Using the sensor mode (TPS), my idle reads at 0.5 V. Now, when I get to the WOT setting, my screen only says 2.4. V. So I mash the pedal to program the WinMax to match the 2.4 V. setting on the right upper side of the display. So I get them to match.
I was told 2.4 V. was not right. Am I good to go, or should I look into this further?
That is certainly a low voltage for WOT on a gen3 LS TPS sensor, but as long as it is consistent, it is perfectly fine to use that signal. You may trace the wire that the TPS wire on the Winmax is connected to, and make sure it is on either the purple or green wire on the TPS sensor harness.
Switch looks really nice ... do you have this type switch that will progressively control the solinoid and pull timing
Check out our ProMax - nitrousoutlet.com/c-1390660-electronics-ignition-progressive-controllers.html
Thats what i want to no
Will this controller pull the timing or do u need to get some other bits
@Nitrousoutlet when will the new promax . the 400$ and 250$ .part be ready for the market when can i buy one PROMAX...
Our current eta is he end of September!
Hi is this possible to use on motorcycles? Ie. Hayabusa? Also is the box weatherproof?
Yes, it can be used on motorcycles, but the box is not weatherproof.
In the tps/rpm mode set at 300 rpm drop function my trans only drop 100-150 rpm between shifts, so this function is will not activate the nitrous. Meaning I can use 1st gear lock out right!!
The Gear Lockout feature is looking for a maximum RPM and a minimum RPM drop. For instance, lets say you set a 5500 shift point with a 500rpm drop. The controller will have to see at least 5500rpm followed by at least a 500rpm drop before it will engage the nitrous on a 1 gear lock out. So in your case, youd want to set it at about 100 rpm drop if you wanted it to work.
My question is - what trans/ratios you running to get only a 100rpm drop?!?!?!
Nitrous Outlet it's a built 700r4 with a low first gear. The car only has 3.73 gear
So I am getting ready to buy this in about a week or so, I just had 1 more question... I will be using it to lock out first gear only so after i make a pass and go back for another how does the controller know it needs to lock out first gear again? and also say i wanted to spray on a roll in 2nd or 3rd do i need to take the first gear lockout off in order to do that? Thank you.
good question.I also want to know answer
I can’t lock mine out for some reason, I need help
Was considering using this on my gixxer 1000. What do you think?
Send it!
Do you guys have a video of your touch screen controller
SHOE GOD 23 that I would like to see as well
I am looking to buy this for my 02 Mustang GT.. Just curious cause i do have a TPS sensor, so should i be using the sensor or use the WOT switch that comes with the X series kit?
When going with the WinMax, there is no need to utilize the WOT microswitch included with the X-Series system. Please let us know if you have any other questions!
Perfect. That is all i needed to know! Thanks for the quick reply!
Does this work with the WOT switch that comes with your kit or replace it? I’m not understanding. Or does it wire in to monitor TPS and eliminate the need for the WOT switch?
Yes it will work with a WOT switch, but a WOT switch is not needed if your vehicle has a TPS as the WinMax taps in to the TPS.
Nitrous Outlet awesome! I’m trying to figure out exactly how I want to set up everything and what products to buy so I appreciate the help.
@@jl8973 no problem!
Does this product pull timing as well?
It will trigger an external timing control such as an LNC box or MSD Grid
How does this work with a carburetor
Just as good as EFI! It can also be triggered by WOT switch
@@joshyeater3285 You can select TPS or WOT switch. If using a properly adjusted WOT switch, if you pedal or let off, the nitrous will disengage.
Nitrous Outlet if you use it with a wot switch how would you launch on the tb ? If you floor it it would activate it
you never scrolled through the features for telling it how many cylinders you have, does it have a setting for 5 cylinders?
Yes sir, it sure does
@@NitrousOutlet man that was a quick reply! thank you!
Is this winmax compatible with Zex smart box?
Its a bit of a workaround, but it is doable. You'd program the WinMax as RPM only. On the stage 1 output, it would power a relay that allowed power to the Zex box. That way power would only be applied to the Zex box within the given RPM range and the Zex box would still activate via TPS.
Nitrous Outlet what about gear lockout?
Yes, gear lockout would still work in RPM only mode.
Well it work with wideband O2 sensor gauge setup
The WInMax will not, but our ProMax will. www.nitrousoutlet.com/promax-dual-channel-progressive-controller-controller-and-screen.html
So this item doesn’t pull timing?
Thats what i need to no as thats what i need to do .
Mini on nitrous 105BHP to 205BHP any one find out ?
@@santivr6576 no i think u need a msd6 box and controller. But I pulled the timing by tricking my air intake sencer so when i flip the switch it think it's at -140 degrees and pulls about 4 degrees of timing.
There r way to pull timing when u want it to .
No
Keep getting “error tps”
Marco, please reach out to one of our experienced techs at 254-848-4300 and select option 1. We will get you fixed up!
You ever get this figured out?
I was getting that same TPS error code before I switched to the blue wire on the TPS for tapping into. Now at idle for some odd reason my Winmax is reading the TPS percentage backwards from 100% and on down. Then I noticed at idle the Winmax was reading 3450 to 3700 at idle while my factory tach was reading 850 to 900. Not sure if I need to change the cylinders to 4 instead of 8 like other window switches I have used in the past. 2002 C5Z FBO, TSP 233/239 112 lsa cam and Nitrous Outlet plate system wet kit, Winmax, LNC 2000 etc.
How do u prevent nitrous during launch control?
Nitrous Outlet hi could u email me a diagram of how to wire in the tbrake interup relay into this system using only 1 stage. bnastystuntz@gmail . com thank u
That’s the whole point of a window switch.. it doesn’t energize the solenoids until it reaches a certain RPM- set “on” to 3500rpm or 250rpm above what you launch at, whichever is greater
?