Nissan Rogue Coil Pack And Spark Plug Replacement DIY

Sdílet
Vložit
  • čas přidán 13. 04. 2023
  • Nissan Rogue Coil Pack And Spark Plug Replacement DIY
    Amazon link for purchase Coil Pack and Spark Plugs
    amzn.to/3KCAY6n
    Valve Cover
    amzn.to/3L2d1XL
    Blue Driver Scan tool
    amzn.to/3oapvn4
    Dewalt Hood Light
    amzn.to/407Zhz0
    Bore Scope
    amzn.to/41sbKOT
    #howto
    #diy
    #nissan
  • Auta a dopravní prostředky

Komentáře • 8

  • @jimmyredden9194
    @jimmyredden9194 Před 6 měsíci +3

    Great job and Informative

  • @emilyfahner3597
    @emilyfahner3597 Před 5 měsíci +1

    What are the tools needed to do this called? I don’t own any tools but I’m going to ask to borrow them from someone. Just not exactly sure what I need to ask for.

    • @WhitehouseFarmVet
      @WhitehouseFarmVet  Před 5 měsíci +1

      Definitely need a 10mm socket and wrench a hex set to take the plastic cover off if you have one on it long socket set with a magnet to get the spark plugs out, pretty straight forward as long as you don't find oil in your coil packs you should be all set, if you do then you will need a new valve cover and that's a bigger job but I did a video on that too!😉 good luck and thank you for watching!

  • @timpeifer6682
    @timpeifer6682 Před 11 měsíci +1

    Put 10 w 30 instead of 5 w that ticking would go away I never understand why any car uses 5w the viscosity is to thin they always have a ticking noise ...10w will always stop a 5w cars ticking

    • @WhitehouseFarmVet
      @WhitehouseFarmVet  Před 11 měsíci +1

      I understand what your saying but living in the northeast 5w30 is thinner which allows more oil coverage on start up prolonging the engine, colder environments 5w30 is the way to go if your from the south or west than 10w30 for sure!

  • @jorgemartinbg
    @jorgemartinbg Před měsícem +1

    Is the order 1234 or 1342?