How to Replace Lower Ball Joint 2008-2010 Ford F-250

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00003
This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oJY/1AXAA00020
• 21mm Socket 1aau.to/o4C/1AXAA00043
• 32mm Socket 1aau.to/obZ/1AAST00003
• 34mm Socket 1aau.to/oR/1AAST00004
• 8mm Socket 1aau.to/oaQe/1AXAA00017
• Ball Joint Press
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Impact Gun 1aau.to/oos/1AXAA00252
• Air Chisel 1aau.to/obb/1AXAA00270
• T27 Torx Socket
• 1/2 Inch Breaker Bar 1aau.to/oqe/1AXAA00078
• Ratchet 1aau.to/obit/1AXAA00016
• Socket Extensions 1aau.to/oa7v/1AXAA00015
• Torque Wrench 1aau.to/oaoN/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oC6/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/owN/1AXAA00343
• sanding disc
• Floor Jack 1aau.to/oSa/1AXAA00068
• Hammer 1aau.to/oMx/1AXAA00091
• Wheel Chocks
• Wire Brush 1aau.to/oqt/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@ShockService]

Was that truck retrieved from the bottom of the ocean, haha?! Great video, very well done .

[@mikeRadamz]

Excellent video & instructions. Thank You!

[@Jimmy-yr9qm]

Great instructional video, but no new axle joint while it was all apart?

[@lont.4507]

Decent video for showing the basics. I’m certainly not a fan of how axle was reinstalled. That vacuum seal is pretty important and should be installed with the specific tool for year model. The tool drives the seal in to the proper depth without damaging it.

[@TRQ]

+Lon T. Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@chrisholden2559]

"I don't want to get anti seize on the studs." Proceeds to almost completely cover them in it. NBD as long as it is not on the nut cup in the wheel, they will stay tight.

[@CaseyE-bn3vk]

Get a $20 bearing removal tool from harbor freight . Very simple.

[@codyisarat]

Will a mid torque impact push the ball joints in?

[@moecron9832]

What is that adapter called for air hammer and where did you get it?

[@MichaelMcKeown-z3w]

Let's go

[@ramoncampirano814]

What snap ring pliers did y’all use?

[@js4120]

Damn dude grease on the brake rotor smh