Flo Motorsports 3.0 Foot Pegs | Jet Fuel Finish is Sick!! | Spotlight and Installation
Vložit
- čas přidán 12. 07. 2024
- Visit dirtbikechannel.com March 1 - April 30, 2019 for details on how to enter the sweepstakes for the 2019 Husky TE300i and the Honda CR250R project bike.
Order your parts through this link to help us out: www.rockymountainatvmc.com/?u...
or visit
www.dirtbikechannel.com/parts/
Please consider using my Amazon link when ordering from Amazon.com - www.amazon.com/?tag=dirtbikec...
flomotorsports.com/
These Flo Motorsports foot pegs are about the coolest looking item that I’ve ever installed on my bike, AND they are an upgrade to the stock pegs. Gives you a wider platform to stand on.
FLO MOTORSPORTS 3.0 KTM Foot PEGS
* Rounded Edges
* Loctite on Cleats
* Extra Wide platform.
* KTM Footpeg Size is 57mm Wide and 86mm long.
* Stainless steel Flat teeth
* Removable Teeth (Cleats) with 5mm Hex
* Self Cleaning Mud Grooves.
Visit dirtbikechannel.com March 1 - April 30, 2019 for details on how to enter the sweepstakes for the 2019 Husky TE300i and the Honda CR250R project bike.
Karen (my wife), Kaylee, Konnor Kase, and Kenzie (the kids) thank you for using these links. It is one of the ways we are supporting our family right now.
AC Delco Torque Wrench - amzn.to/2TW3mEV
Tow Strap we use - www.anrdoezrs.net/links/789117...
TUbliss from Rocky Mountain ATV/MC - www.anrdoezrs.net/links/789117...
Shinko 505 Rear - 546 Front and TUbliss set from Amazon - amzn.to/2QqNdtH
TUbliss front and rear set from Amazon - amzn.to/2LhEynD
Shinko 525 Hybrid Cheater Rear Tire - amzn.to/2QLmFCt
www.anrdoezrs.net/links/789117...
Shinko 546 Front Tire - www.anrdoezrs.net/links/789117...
Tusk Tire Spoon - www.anrdoezrs.net/links/789117...
Tusk Air Gauge - www.anrdoezrs.net/links/789117...
Armor All - amzn.to/2C3VABf
Multi Seal Tire Sealant - amzn.to/2SItOl4
Motion Pro Bead Buddy II - www.anrdoezrs.net/links/789117...
Floor Pump - amzn.to/2SF8nRN
Shop Towels - amzn.to/2VD5UsP
Sony Action Cam
amzn.to/2LfBSXy
Graphics:
www.dirtbikechannel.com/graph...
Sidi Crossfire 3 SRS Boots
www.anrdoezrs.net/links/789117...
Leatt Fusion 3.0 Vest with Neck Brace
www.anrdoezrs.net/links/789117...
Fly Evolution DST Pants - www.anrdoezrs.net/links/789117...
Fly Evolution DST Jersey - www.anrdoezrs.net/links/789117...
USWE Lizard 16 Riding Bag - amzn.to/2EdENyo
USWE Water Bladder - www.anrdoezrs.net/links/789117...
Special thanks to my $10/month patrons on / dirtbikechannel
Dave Anderson, Michael Peterson, Clayton Walther, Chris Dangles, Eric Dietz, Sean Williams, Mark C, Hills Auto Sales LLC, Keith Dickerson, Patrick Barraza, Michael Abramo, Chris Botting, Bryson Stafford, Kenneth Conley, Blair Butler, Garrett Wastlund, Ernest C Walley, Marc Mantel, Martin McClaflin, Derek Wylie, Joe & Alex Van Orsdol, Jim Bass, Brian Falcon, Seth Green, Terence Seymour, Sean Williams, Ryan Woodley, Flo Motorsports, Steven Brady, Travis Winston, Steve Yurko, Ken Paulino - Auta a dopravní prostředky
Curious how they look after 15 hours of ride time.
Beautiful bling! I added these which match nicely with my DIRT TRICKS jet fuel sprocket.
Had these for just over a year on my bike. Rocks beat them to hell and they snapped off at the peg hole one ride. Lucky I was close to the start of the trail!
I used channel locks for the spring. Worked great. Just came in next to the kickstand from the back,squeezed the spring down and pin went right in. Btw them pegs look Sick!
On most little bikes this is a must!Due to the size and sharpness on most models.
3:45 oof! *Regrets instantly*
Those look awesome
Yeah, those are sweet!
Kyle, I use a pair of spring plyers (they look like conventional plyers but have slots cut in the end, both vertical and horizontal), Just set them in the plyers, squeeze enough to make them fit between peg and frame. Then install pin.
I dig the look for sure. Do they make them for anything sweet like a Kawi?
Ive been hovering over their store for a week. Soon they will have my money!
Kyle thank you for all the content. Are these pegs lower than the stock pegs?
They look pretty good. I always stick to IMS but I like the look of these. I bought a cheap anodized red cnc machined pair of pegs on eBay with replaceable teeth (studs) and they were as good as any $100 to $200 dollar pair of pegs (super strong made in usa not chinese imported junk).
Jet fuel finish not yet available for beta yet.
I used safety wire and safety wire pliers to collapse spring for install.
I think they are more durable and better looking than stock but feel was not aggressive
Hey Kyle. About 6 months ago I was installing a pair of Fastway EVO foot pegs on my TE150. Long story short, I ended up in emergency till the next morning when an eye surgeon came to see me. I almost lost my right eye when that spring shot out, blew a hole through my glasses and slammed my eye. I had glass shatter in my eye from the impact. I’ve kept a photo of my glasses I wish I could post for everyone here. I’m guessing you were wearing eye protection, right?
U just gotta do it right and u won’t have a spring flying back at u
Wow, I wouldn't think a footpeg spring had THAT MUCH tension?? I'll definitely wear safety glasses when I install mine👍. Hope you're doing OK
Really cool foot pegs ... just wish that the length wasn’t shortened, the width is a huge bonus but that extra half inch of length is very beneficial also . Like you said more control is better
The pre 2017 footpegs are easy to install with a set of needle nose vise grips, just align the spring to the peg with the pin , clamp the spring to the peg , remove the pin and install. To bad KTM went backwards with their new design. I run KTM adventure pegs on my TE250 and 530 EXC. I find that the wide pegs are more comfortable and steering the bike with the pegs is much easier (a little worse in ruts though).
I purchased a set of titanium footpegs after riding a season wish I would've got a set of pegs with the replaceable traction spikes cause the titanium I feel wore out quickly
Put the spring in a vise, compress it, and zip tie it. Drop it in, push the pin in and cut the zip tie. I wear saftey glasses though because those euro springs have some gnarly tension. Japanese peg swaps are a piece of cake.
Kyle, love your vid.s. Have a issue w your supplier. Rocky Mtn ATV. Went to the showroom in Payson and found ziltch. It's not a showroom at all. I was so excited to be there, walked in and it was a loud dud. You would think that a major retail outlet store would actually have a retail store. The guys looked like they were kinda like a dead bug on your windscreen on a warm evening down by the lake. Don't get me wrong fabulous online store but a retail store, Nah.
You should get the Dirt Tricks Ironman rear sprocket to match those pegs.
Using a socket to press on the spring makes for an easy install. Much easier than a screw driver or pliers.
Jake Hill 740 10 mm socket is the key
@@jesseheidenthal1209 if you can find the 10mm socket. Hot commodity around my place.
Bruh............the struggle bus on that install. I love ya bro, but add a drop of lube and check for alignment. Don't always need the hammer to make things work lol.
Anybody know if these are available or will be available for a 2017 Beta 300rr?
Why spotlight??? What’s wrong with the stock pegs? Yes they look cool.... but running fuel and tires makes the betterment. Maybe explain the advantages of wider pegs vs the length.
Or, you can go on ebay, look up "airtime" footpegs and get the exact same thing for $27. Just sayin.
You seemed sure of yourself so I did as you said&went on EBay. $57.99-59.99 & that's for single color, they don't even show jet fuel.I can't even buy 1 for $27 & those are far from jet fuel. Plz let me know where you're getting this great deal.thanks
Different grade of aluminum tho
@@raychen5305 where does it say that?
Downgrade just for looks?
Just google "Stress Corrosion Cracking in 7075 T6" alloy and then see if you want to put your life/health on those pegs.
These pegs are made in China, along with most other Flo parts.
Aluminum foot pegs are a bad idea for off road/enduro
jet fuel is clear though.
I HATE INSTALLING FOOT PEGS!!!! See example 4:55!
Gay.
LOL